Fire-rated sealing and fire stopping in Combe, Oxfordshire
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Combe and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Penetration schedules that need working through
- Old intumescent sealant that has split away
- Head-of-wall gaps with no fire seal
Fire stopping across Combe
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Combe, done properly
On a fit-out or refurbishment, we follow the services contractors floor by floor. We work from your penetration schedule or marked-up drawings and the specified product data. Tell us what records you need and we’ll confirm with the quote. If you have service penetrations left open after M&E works and builders’ foam or ordinary silicone in compartment walls, we can put it right. For commercial sealant work in Combe, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Barn and farm-building conversions near places like Combe often combine new partitions with old walls. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
The 12-month guarantee covers our workmanship: preparation, application and finish. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.
- Where
- Combe (OX29)
- Region
- Oxfordshire
- Cover
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Quoting for work in Combe
We price every job individually. The main factors are:
- Removal of failed or old sealant
- Access and working height
- Travel to remote or island sites
- Backing rod, priming and other preparation
The work involved drives the cost: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a quote.
What to include in your enquiry
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Whether the building will be occupied during the work
- Clear photographs of the problem areas
- Your programme or deadline
- Approximate linear metres or a joint schedule
A handful of photos and a postcode is the fastest way to a quote. Upload them with the quote form, or give us a call on 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Why act early in Combe
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. While the area is still open, every opening is easy to see and reach, and the right detail can be checked at the time. Around Combe, it’s better to renew all the failing joints at once, rather than one at a time. Send photographs of each area and we will quote for the lot.
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
What you get with us
- A fixed quote before work starts
- Our applicators hold CSCS cards
- Joints cleaned back to sound surfaces
- Constructionline member for supplier checks
See our cost guide or how we’re accredited.
Compartments and services around Combe
At about 61 miles from central London, Combe is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls, and the gaps need sealing with the specified product. In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail.
Holiday works at schools like Combe CofE Primary School often leave service openings to seal before pupils return. For a unit at a site such as Wroslyn Road Industrial Estate, 1.5 miles south of Combe, new power or data runs between office and warehouse can breach a compartment wall. In a building such as St Laurence's Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Combe is about 5 miles north-east of Witney, in Oxfordshire. Commercial clients in Combe can call on us for service penetrations. Combe is one of 423 places we cover in Oxfordshire. We also cover Oxford, around 10 miles from Combe.
If you need fire stopping in OX29, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. If your site is on Square Firs, Chatterpie Lane and Orchard Close or close by, send details and we will quote for service penetrations. Nearby places we also cover include East End (1 mile south-west), Stonesfield (1 mile north-west), Freeland (2 miles south), North Leigh (2 miles south-west) and Fawler (3 miles west). Nearby towns on our patch include Oxford (10 miles south-east), Banbury (15 miles north), Bicester (11 miles east), Abingdon-on-Thames (13 miles south-east), Witney (5 miles south-west) and Carterton (10 miles south-west).
Landmarks near Combe
Recent enquiries here include premises near The Cock Inn. Combe’s nearest station is Combe station, about 0.8 miles south-east of the centre. Nearby you’ll also find Morris Motors Museum (1.8 miles south-east). Green spaces nearby include Blenheim Farm.
Looking after the joints
For the best life from the joints:
- Include service cupboards in routine inspections
- Arrange inspection before areas are covered up
- Keep product data and details in the fire safety file
- Foam or ordinary sealant is never a fire-seal repair
New services after handover are a common way fire stopping gets breached. Building it into each contractor’s sign-off keeps the walls intact.
Looking at service areas on a regular cycle pays off. A cracked or disturbed seal found early is a small job; found late, it can be one of many.
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Gaps in walls that were never built as compartment walls
- Fire doors, dampers or other fire safety equipment
- Signing off or certifying a building’s fire stopping
Not sure which it is? You can call the office on 01277 525 020 or email the details over and we will tell you honestly.
Surfaces we seal
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
Commercial clients in Combe
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Nearby places to Combe
Also in Combe
Our process
Site rules come first: signing in, inductions and any permit to work. Once we’re cleared to begin, we take the joints in the sequence agreed with you. For work around Combe, we aim to finish in one visit, so we ask for photographs and rough sizes first. Then the right materials arrive with us.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Unsuitable material is removed and the opening cleaned first.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Preparing the site
- Make sure the joints can be reached
- Share your working hours and any access restrictions
- Send any specification or drawings in advance
Getting a fixed quote
To get a fixed quote, ring 01277 525 020 or send photos by email, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
Questions we are asked in Combe
Can you work at a site such as Wroslyn Road Industrial Estate, by Combe?
Yes, sites like Wroslyn Road Industrial Estate are within our area, along with the rest of Combe. Send details of the unit and the work through our quote form for a quick quote.
Is a smaller place like Combe outside your area?
No. Small places get the same service as large ones. We cover Greater London and the counties of the South East. Good photos up front let us bring everything on the first visit.
Do you work in Scotland as well as England?
Building standards in Scotland are separate from England’s, while England relies on Approved Document B. Wherever the site is, our work follows the specification and the tested detail.
Can you quote from photos?
It depends on the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.
Which standards are fire seals tested to?
In short, BS EN 1366-3 and 1366-4 are the fire tests and BS EN 13501-2 is how results are classified. An EI 60 seal kept its integrity and insulation for 60 minutes as tested and the installation has to match the test.
Is it fine to apply new sealant on top of old?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
What do you charge?
There isn’t a price list, as every site differs. Send photographs or drawings and we will price it at a fixed figure.