Cocking Causeway fire stopping
Work needed on a service penetration in Cocking Causeway? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Fire-stopping items raised at inspection or handover
- Fire seals cut back for extra cables and never reinstated
- Service penetrations left open after M&E works
Fire stopping across Cocking Causeway
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Fire stopping for commercial buildings in Cocking Causeway
A fire-rated sealant is only one part of a tested system: its test evidence covers one product in one kind of wall or floor, with set services, gaps, depths and backing. Before we seal anything, we check the opening against the detail it is meant to follow, and raise it with you if it falls outside. The enquiries we see most involve seals disturbed by maintenance and left open and hidden openings found during inspections, across small duct penetrations where the tested detail allows, service gaps in risers and pipe penetrations. Whoever orders the work in Cocking Causeway, the brief is normally the same: a clear scope, tidy work and joints that don’t fail again.
Rural conversions around Cocking Causeway can put new fire-resisting partitions inside older structures. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Place
- Cocking Causeway (GU29)
- Region
- West Sussex
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
Maintenance after handover
Once the work is signed off, these steps help:
- Arrange inspection before areas are covered up
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Foam or ordinary sealant is never a fire-seal repair
- Check with the data sheet before painting over fire sealant
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and the work runs in step with the M&E.
Towns and villages near Cocking Causeway
Also in Cocking Causeway
How a job runs
At the end of each section, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. For work around Cocking Causeway, we aim to finish in one visit, so photographs and measurements up front really help. Then the right materials arrive with us.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- We gun the sealant in to the specified depth around each service and tool it.
- Completed areas are checked with you, with the records agreed when we quoted.
What we need from you
- Tell us your opening times and when work is allowed
- Confirm the product named in the specification
- Share the asbestos register for older buildings
Get a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Related advice
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. You will hear from us if the cause turns out to be any of the following:
- Issuing fire ratings or certificates for seals
- Openings that need collars, wraps, batts or boards rather than sealant
- Construction that lacks the fire resistance the seal relies on
If you are not sure, just give us a call on 01277 525 020 or email us and we will give you a straight answer.
What we seal
- Pipe penetrations
- Service gaps in risers
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads
Commercial clients in Cocking Causeway
For main contractors, we work as the sealant subcontractor on new-build and refurbishment projects. Programme, specification and site rules come first.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Fire stopping around Cocking Causeway: how the place shapes the job
Central London is about 46 miles from Cocking Causeway. Tenant changes on commuter-belt business parks mean regular fit-outs, and new services through compartment walls. Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
For a unit at a site such as Holmbush Industrial Estate, 0.5 miles north-west of Cocking Causeway, new power or data runs between office and warehouse can breach a compartment wall. Older community buildings such as The Parish Church of St Mary Magdalene that have been rewired or given new heating can have service gaps through walls worth checking against the specification. Theatres, wards and plant rooms at sites like Midhurst Community Hospital (to the north of Cocking Causeway) all have compartment walls crossed by services.
Cocking Causeway is about 9 miles east of Petersfield, in West Sussex. Commercial clients in Cocking Causeway can call on us for service penetrations, as part of our coverage of West Sussex. Cocking Causeway is one of 373 places we cover in West Sussex. Our Portsmouth page has more on work in that area (19 miles or so).
We cover the GU29 postcode districts for service penetrations. Streets here include Oaklands Lane and Well Lane, and sites on any of them can send details for a fixed quote. Close to Cocking Causeway, our area also takes in West Lavington (1 mile north-east), Midhurst (1 mile north), Bepton Common (1 mile north-west), Heyshott Green (1 mile south-east) and Cocking (1 mile south). Further afield, our area takes in Bognor Regis (13 miles south), Chichester (9 miles south), Littlehampton (14 miles south-east), Rustington (15 miles south-east), Storrington (13 miles east) and Billingshurst (13 miles east).
Local landmarks in Cocking Causeway
In Cocking Causeway, that means premises near St Margaret's Convent, The Royal Oak Public House and Midhurst Rother College, among other places. Other landmarks nearby include Lodsworth Castle (3.1 miles east) and Midhurst Community Hospital (1.5 miles north). Green spaces nearby include Levin Down and Iping and Stedham Commons.
Why it’s worth doing now in Cocking Causeway
Fire stopping is a regular point raised at inspections and handover. Finding unsealed or improvised openings late can hold up a programme which is why earlier is better. Halls, stores and units around places like Cocking Causeway may not be checked every day, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
Why clients in Cocking Causeway choose us
- One contact handling all your sites
- Joints cleaned back to sound surfaces
- Specification-led, product-correct work
- Our applicators hold CSCS cards
Take a look at what affects the cost or our accreditations and insurance.
Questions about Cocking Causeway
Does your area include sites such as Holmbush Industrial Estate, near Cocking Causeway?
Yes. Our area takes in Cocking Causeway and its surroundings, with estates and business parks such as Holmbush Industrial Estate included. Photos and a short description are enough for a first look.
Is a hospital such as Midhurst Community Hospital somewhere you can work?
Yes, hospitals are one of the sectors we cover. Each area is agreed with the ward or department and the estates team in advance.
Is Cocking Causeway in your area?
Yes. We cover Cocking Causeway, and the simplest way to start is to give us a call on 01277 525 020 or email us.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Can you fire stop behind the services contractors?
Yes, where there is a specification for those walls and floors. New services after M&E works often breach existing seals.
Does the weather affect the work?
For external joints, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Internal work is rarely affected.
Will you write the fire-stopping specification?
No. The specification comes from your designer, fire engineer or building control. Our role is installing what they specify, to the product’s tested detail.
Quoting for work in Cocking Causeway
To price the job, we consider:
- Any access equipment needed
- The site’s rules and procedures
- The product specified
- Phasing around occupants
The product called for affects the cost, as does the preparation each joint needs. Access, phasing and site requirements come into it too.
What to include in your enquiry
The more we know, the firmer the quote. When you get in touch, include:
- What the building is and how it’s used
- Asbestos survey details if the building is older
- Anything awkward about access or site hours
- The product your specification calls for
For a fixed quote, call 01277 525 020 or email drawings and photos. You can also send details through our quote form.