Coalburn fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Coalburn. Send details for a fixed quote.
- Unsealed openings around new pipes and cables
- Fire-rated sealant that has cracked or shrunk back
- Unsealed joints where partitions meet the slab
Fire stopping across Coalburn
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
What we can’t put right
A few problems need another trade or a different fix, and we say so rather than covering them up:
- Gaps in walls that were never built as compartment walls
- Reviewing a building’s overall fire safety
- Openings that need collars, wraps, batts or boards rather than sealant
If in doubt, ring 01277 525 020 or email the details over and we will say what we think before you book.
Where we work in Coalburn
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
How we handle fire stopping in Coalburn
On a fit-out or refurbishment, we follow the services contractors floor by floor. To price a package, speak to us on 01277 525 020 or email a schedule or drawings with the schedule or marked-up drawings alongside the manufacturer’s details. Tell us what records you need and we will confirm with the quote. If you’re dealing with open linear gaps along the top of fire-resisting walls and old intumescent sealant that has split away, we can put it right, whatever the surface. Whoever orders the work in Coalburn, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places such as Coalburn, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Those penetrations are closed with the product the specification names, built up as tested.
We stand by our work with a 12-month guarantee. That covers our preparation and application.
- Place
- Coalburn (ML11)
- Region
- South Lanarkshire
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Aftercare for building managers
Problems stay small when the joints are checked regularly. In particular:
- Have penetrations checked while they can still be seen
- Ask which product is in place before decorating
- Agree the fire-stopping specification before services go in
- Include service cupboards in routine inspections
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original unless the designer specifies otherwise.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned.
What happens if it’s left?
Open service penetrations matter on ordinary days, not just in a fire: smoke, noise and draughts pass through them every day. Sealing them to the specified detail deals with the fire risk first, and the other benefits follow. In Scotland, wind-driven rain finds a failed joint quickly, and for a smaller place like Coalburn, a repair visit takes planning, so it’s better to act early.
The price depends on how many linear metres there are, how much old material needs removing and the access. Call for a fixed quote once you have the details.
What you get with us
- CSCS-carded applicators
- Work to your specification and the manufacturer’s guidance
- 12-month guarantee on workmanship
- Clear, fixed quotes
Read our cost guide and our accreditations.
Do you need fire stopping in Coalburn?
Plenty of openings were simply never closed, often hidden above suspended ceilings or behind boxing. They come to light during inspections, refits or when another trade lifts a tile.
Look out for the following:
- Fire seals cut back for extra cables and never reinstated
- Expanding foam used as fire stopping
- Fire-stopping items raised at inspection or handover
- Open linear gaps along the top of fire-resisting walls
Industrial units on estates such as Gateside Industrial Estate (2.4 miles north of Coalburn) often separate offices from warehouse space with fire-resisting walls, and new services through them need the specified seal.
Comparing quotes
- Can the work be phased to keep areas open?
- How joint depth will be controlled
- Will CSCS-carded applicators be on site?
- Their public liability cover
Fire stopping in Coalburn: the local picture
Under the Scottish non-domestic Technical Handbook, clause 2.1.14, penetrations should be fire stopped to at least the wall or floor’s fire resistance duration, and products should be tested for their end use. We install fire-rated sealant to that tested detail where it is specified.
Large healthcare estates like Lady Home Cottage Hospital, 3 miles to the south-east of Coalburn, change their services often, so penetration seals are worth checking after M&E work.
Coalburn is about 10 miles south of Carluke, in South Lanarkshire. Anywhere in ML11, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our South Lanarkshire coverage takes in 134 places, from busy centres to rural villages. Sites around Glasgow have their own page, roughly 24 miles from Coalburn.
We cover the ML11 postcode districts for service penetrations. If your site is on Schoolhouse Avenue, Braehead Road and Dunn Crescent or close by, we can quote for service penetrations. We also cover New Trows (2 miles north), Devonburn (3 miles north), Douglas (3 miles south-east), Lesmahagow (3 miles north) and Brocketsbrae (3 miles north). Further afield, our area takes in Hamilton (14 miles north-west), Larkhall (10 miles north), Carluke (10 miles north), Lanark (7 miles north-east), Strathaven (9 miles north-west) and Burnbank (15 miles north-west).
Near you in Coalburn
Other landmarks nearby include Douglas Heritage Museum (2.8 miles south-east) and Birkwood Castle (2.8 miles north).
Nearby places to Coalburn
More services for Coalburn
Our process
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work typically takes a single visit for a short list of penetrations, or a phased programme for a whole building, and our waste is bagged and taken away as we go. Where we can, we combine work around Coalburn with other jobs nearby. Tell us how flexible your dates are.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Send your site hours and access windows
- Clear stock, furniture or equipment away from the joints
- Warn occupants and staff about the work
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
Advice
Cost factors for service penetrations
Your fixed quote is built from the real scope. It allows for:
- Joint width, depth and condition
- Site requirements such as inductions and permits
- The total length or number of joints
- Which sealant the job calls for
There’s no price list, because the scope varies so much from one building to the next. Call for a quote and we will price your job on its own details.
Sending details for a quote
It doesn’t need to be a full survey. These details are enough to start:
- The postcode of the building
- Asbestos survey details if the building is older
- Drawings or a marked-up plan, if available
- The type of building and who uses it
The quickest route to a quote is a few photographs and the site postcode. Upload them with the quote form, or call the office on 01277 525 020 or send photos by email to discuss it first.
FAQs: Coalburn
Is a smaller place like Coalburn outside your area?
No. Small places get the same service as large ones. Our area covers all of Scotland, cities, towns and islands alike. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Can you work at a site such as Gateside Industrial Estate, by Coalburn?
Yes, sites like Gateside Industrial Estate are within our area, along with the rest of Coalburn. A few photos and the unit address let us price the work.
Do you need to see the site first?
Photos, drawings or a schedule are often enough to quote. If the job needs a look first, we will arrange a visit.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we’ll confirm it when we quote.
Do you approve fire stopping for building control?
No. Sign-off belongs to the designer or building control, not the installer. We will confirm the products and details used, and you can tell us what other records you need at quote stage.
Are you fully insured?
Yes. We’re fully insured, including public liability cover.
How do you choose the sealant?
If the job is specified, we follow the specification. If not, we choose for the movement, the surfaces and the conditions, in line with the manufacturer’s guidance.