Fire stopping in Burmarsh
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Burmarsh and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Old intumescent sealant that has split away
- Unsealed openings around new pipes and cables
- Open linear gaps along the top of fire-resisting walls
Need fire stopping in Burmarsh?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and each bead is tooled to a neat concave finish. If others near Burmarsh need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Preparing the site
- Make sure the joints can be reached
- Tell us which areas need to stay in use
- Warn occupants and staff about the work
Getting a fixed quote
Need a figure for a tender or a budget? We will quote against your scope and drawings you can plan around. If you have questions first, ring 01277 525 020 or send details through our quote form.
Advice
Fire stopping in Burmarsh
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate. What we offer is careful installation of the specified sealant to its tested detail, with a 12-month guarantee on our workmanship. If you have damaged fire seals in risers and voids and seals that don’t match their tested detail, we can help, whatever the surface. Facilities teams, main contractors and managing agents in Burmarsh tend to want the same three things: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Rural conversions around Burmarsh can put new fire-resisting partitions inside older structures. Where a pipe or cable passes through a fire-resisting wall, the seal must match the tested detail: product, substrate, gap and depth.
A 12-month guarantee applies to all our work in Kent. Should something we installed fail, phone 01277 525 020 or email drawings and photos and we’ll come back to it.
- Location
- Burmarsh (TN29)
- Region
- Kent
- Guarantee
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. If the gap exceeds the tested range, sealant alone won’t do and we’ll tell you what the detail says instead.
Risers and ceiling voids
Risers and ceiling voids hold most of a building’s service penetrations. Access to these areas is planned with you in advance along with any permits your site needs.
Places near Burmarsh
What else we do in Burmarsh
Cost factors for service penetrations
We price every job individually. The things that drive the figure:
- The total length or number of joints
- The product specified
- The site’s rules and procedures
- Access and working height
The specified product makes a difference, and so does the preparation. Access, phasing and site rules also count.
What we need to price the job
To price the job accurately, we need a clear picture of the site. Useful things to include:
- Where the site is, with the postcode
- Drawings or a marked-up plan, if available
- What the building is and how it’s used
- Any dates the work must fit around
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. Smaller jobs need nothing more than photos and a few notes.
Owners, agents and contractors
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Signs you need fire stopping in Burmarsh
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
These are often picked up first by site or facilities staff:
- Fire sealant pulled out of the opening
- Open linear gaps along the top of fire-resisting walls
- Penetration schedules that need working through
- Service penetrations left open after M&E works
Around Burmarsh, we install fire-rated and intumescent sealant to the product’s tested detail wherever it is the specified product.
Comparing quotes
- Proof of insurance
- Their pre-qualification and accreditations
- How joint depth will be controlled
- Will CSCS-carded applicators be on site?
Common questions from Burmarsh clients
How does the move away from BS 476 affect penetration seals in Burmarsh?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Our part doesn’t change: the specified product, to its tested detail.
Can work in a care setting near Burmarsh go ahead while residents are there?
Yes. We work around residents’ routines, a room or two at a time. Any site rules, from signing in to infection control, are agreed before we start.
Will you quote for a small job?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Do you seal on top of existing sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Do you offer coloured sealant?
It depends on the product specified. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Do you need to see the site first?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit before quoting.
Compartments and services around Burmarsh
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. The 2 miles around Burmarsh include two care or nursing homes. In a care home, any new pipe or cable through a fire-resisting wall should be sealed to the specified detail.
In a building such as Church of All Saints, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Burmarsh is about 4 miles south-west of Hythe, in Kent. Commercial clients in Burmarsh use us for work on service penetrations, as part of our coverage of Kent. Our Kent coverage takes in 931 places, large and small. Our Brighton page has more on work in that area, about 51 miles away.
Commercial sites across TN29 are covered. If your site is on Church Road, Painesfield Close and Thorndike Road or close by, we can quote for service penetrations. Just outside Burmarsh, we also work in Postling Green (3 miles north-west), St Mary's Bay (3 miles south), Newchurch (3 miles west), St Mary in the Marsh (3 miles south-west) and Aldington (4 miles north-west). Bigger towns within reach include Ashford (9 miles north-west), Dover (14 miles north-east), Folkestone (8 miles east), Hythe (4 miles north-east), Tower Hamlets (14 miles north-east) and Hawkinge (8 miles north-east).
Landmarks near Burmarsh
Recent enquiries here include premises near The Shepherd And Crook Public House and the streets around them. For rail, the closest station is Westenhanger station, roughly 3.7 miles north-east. Well-known places in the area include Hythe Museum (4 miles east) and Lympne Castle (2 miles north-east).
What happens if it’s left?
It is cheaper to seal service penetrations as each services package finishes than to come back for them later. Openings are visible, access is open and nothing has to be taken down. For buildings around smaller places like Burmarsh, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
What a job costs comes down to the quantity of joints, what has to come out first and the access. Call for a fixed quote once you have the details.
Why clients in Burmarsh choose us
- Products installed to the manufacturer’s instructions
- One number for every site we cover
- Health and safety: CHAS accredited
- Commercial sealant work since 2005
Take a look at what affects the cost and our accreditations.