Fire-rated sealing and fire stopping in Buckland, Surrey
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Buckland and the surrounding area. Send photos or drawings for a fixed quote.
- Penetration schedules that need working through
- Builders’ foam or ordinary silicone in compartment walls
- Openings left by services added after handover
Need fire stopping in Buckland?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
What happens if it’s left?
An open or wrongly sealed service penetration lets fire and smoke reach the next compartment much sooner than the building was designed for. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. One visit to deal with every failing joint makes more sense than several trips to a place like Buckland, rather than one at a time. Send photographs of each area and we will quote for the lot.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- Constructionline member
- One number for every site we cover
- Fully insured, including public liability cover
- Joints cleaned back to sound surfaces
See how commercial sealant jobs are priced or our accreditations and insurance.
About our fire stopping in Buckland
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. The enquiries we see most involve expanding foam used as fire stopping and fire-stopping items raised at inspection or handover, on service gaps in risers, cable penetrations and small duct penetrations where the tested detail allows. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Buckland, that means joint design, primers and backing rod as standard.
Smaller places such as Buckland still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Buckland (RH3)
- Region
- Surrey
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
What affects the price in Buckland
Quotes vary with the job. It mainly depends on:
- How accessible the joints are
- Removal of failed or old sealant
- How much there is to seal
- Specialist products, such as fire-rated or hygienic sealants
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
To price the job accurately, we need to understand the site. Send us:
- Where the site is, with the postcode
- What the building is and how it’s used
- Specification clauses that apply
- Whether an asbestos survey exists
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photos and a few notes.
What the job involves on each surface
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Small sizes are sometimes covered by an intumescent sealant detail, though larger ones usually call for a collar or wrap. We check the pipe material and diameter against the detail before we start.
Drylining partitions
Service holes through plasterboard are frequently oversized or ragged. An oversized hole may be outside the sealant’s range.
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. If others near Buckland need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- First we confirm the product and tested details named in the specification.
- Openings are measured and grouped by detail.
- Improvised fillers and failed sealant are removed.
- Where the detail needs backing, it goes in at the stated depth.
- We gun the sealant in to the specified depth around each service and tool it.
- We walk the completed areas with you and confirm the records agreed at quote stage.
Getting the site ready
- Send any specification or drawings in advance
- Tell us your opening times and when work is allowed
- Send asbestos survey details if the building is pre-2000
Getting a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To ask for one, give us a call on 01277 525 020 or email a schedule or drawings.
Read more
Your questions answered
How does the removal of BS 476 from Approved Document B affect fire-rated sealing in Buckland?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Is Chesterfield Business Park, near Buckland, within your area?
Yes, sites like Chesterfield Business Park are within our area, along with the rest of Buckland. Photos and a short description are enough for a first look.
How long does a typical visit take?
The duration is planned around your programme and the access we are given. You will have an expected duration with the quote.
What do you charge?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a quote and we’ll price it properly.
Can you fit around our working hours?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Can the building stay open while you work?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
When to call us in Buckland
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is when untested combinations creep in.
Common reasons buildings call us in:
- Expanding foam used as fire stopping
- Fire-rated sealant that has cracked or shrunk back
- Openings found when ceilings come down for a refit
- Snag lists that include open service penetrations
In a school such as Reigate College, fire-rated sealant goes in around service penetrations where it is specified.
What your quote should include
- Their plan for phasing and protecting the area
- Do they follow the manufacturer’s priming guidance?
- Is the sealant right for the movement and the substrate?
- How joint depth will be controlled
Fire-rated sealing for Buckland buildings
Central London is about 19 miles from Buckland. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal. For England, the fire stopping of penetrations is dealt with in Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail.
For a site team at a college like Reigate College, which lies east of Buckland, fire-rated sealing is best scheduled after the summer works. Older community buildings such as Church of St Mary the Virgin that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Buckland is about 2 miles west of Reigate, in Surrey. Across the RH3 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our Surrey coverage takes in 379 places, large and small. Our London page has more on work in that area (19 miles or so).
Anyone looking for fire stopping in RH3 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Old Road, Sandy Lane and Rectory Lane, and sites on any of them can send details for a fixed quote. Close to Buckland, our area also takes in Betchworth (1 mile west), Brockham (1 mile west), Box Hill (1 mile north-west), Strood Green (2 miles south-west) and Mogador (2 miles north-east). A short drive away, we cover Guildford (14 miles west), Woking (15 miles west), Epsom (7 miles north), Horley (6 miles south-east), Redhill (4 miles east) and Ewell (8 miles north).
Near you in Buckland
Locally, jobs take us to sites close to Brockham Limeworks and The Red Lion pub, among other places. The nearest railway station is Betchworth station, about 0.6 miles north-west. Other landmarks nearby include Headley Court (3.6 miles north) and Reigate Priory Museum (2.2 miles east). Open spaces near Buckland include Colley Hill and Reigate Heath.
Towns and villages near Buckland
Also in Buckland
What sealant work can’t fix
Being straight saves everyone time. Fresh joints won’t solve:
- Issuing fire ratings or certificates for seals
- Fire doors, dampers or other fire safety equipment
- Designing or specifying fire stopping, which sits with the designer or fire engineer
Not sure which it is? You can ring 01277 525 020 or email a schedule or drawings and we will tell you honestly before you book.
Where we work in Buckland
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Joints between fire-resisting walls and floors
- Cable penetrations
- Linear gaps at wall heads