Fire-rated sealing and fire stopping in Broughton, Buckinghamshire
Commercial sealant work in Broughton for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Fire-stopping items raised at inspection or handover
- Fire stopping installed outside its tested range
- Fire sealant pulled out of the opening
Fire stopping for Broughton sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Broughton: questions and answers
Do you work on fire-rated sealing in hotels in Broughton?
Yes, where the specification calls for fire-rated sealant. We match the product to the wall or floor and the services, and say if something other than sealant is needed.
Can you work at a site such as College Business Park, by Broughton?
Yes, sites like College Business Park are within our area, along with the rest of Broughton. Photos and a short description are enough for a first look.
How do you choose the sealant?
The specification comes first, if there is one. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so everything comes out first.
How many days will you need on site?
That varies with the scale of the job, but the work typically takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. For bigger or phased jobs, we’ll set out a timescale with the quote.
Can the sealant be colour-matched?
It depends on the product. Some ranges are wide, others limited, so the available colours are confirmed with the quote.
Does weather matter for sealant work?
It can, when the joints are outside. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Indoors, the weather is rarely a problem.
How we handle fire stopping in Broughton
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. Those on your schedule are closed with the specified product. Site teams most often ask us about openings left by services added after handover and snag lists that include open service penetrations, across pipe penetrations, cable penetrations and joints between fire-resisting walls and floors. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Broughton, preparation and product choice get the time they need.
Converted and extended buildings around places like Broughton can mix old and new construction, so the wall or floor a service passes through isn’t always what the drawings assume. We match the product to the substrate and service, and say so if a collar, wrap or batt is the specified item.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Where
- Broughton (HP22)
- Wider area
- Buckinghamshire
- Guarantee
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Also near Broughton
Also in Broughton
Keeping the joints sound
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Check risers and ceiling voids after each round of works
- Brief every trade that openings they make must be sealed
- Check with the data sheet before painting over fire sealant
- Keep product data and details in the fire safety file
Store the specified product details somewhere the next contractor can find them. It makes later repairs much easier to match.
On fit-outs, get the fire-stopping specification agreed before the services go in. Details can then be picked to suit the actual pipes, cables and ducts, and installation follows the programme.
When something else is needed
We check first that sealant really is the fix. It won’t put right:
- Approving the work on behalf of building control
- Reviewing a building’s overall fire safety
- Writing the fire-stopping specification
If in doubt, give us a call on 01277 525 020 or send details through our quote form and we will say what we think.
Joints and surfaces we work on
- Cable penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Pipe penetrations
What sets the cost
Quotes vary with the job. It mainly depends on:
- The site’s rules and procedures
- Working within restricted access windows
- Distance, for remote addresses
- How much there is to seal
Every site prices differently: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Sending details for a quote
We can often quote from photos and a few details. It helps to include:
- Your programme or deadline
- Where the site is, with the postcode
- How the joints are reached, and at what height
- Approximate linear metres or a joint schedule
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send details through our quote form if you’d rather talk the job through.
Why it’s worth doing now in Broughton
An improvised seal can look finished while offering no tested performance. Correcting it means cutting it out and starting again with the specified product, and doing it once, properly, is cheaper. A failed joint lets water into a building whatever its size. Catching it early means a reseal rather than repairs.
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we will put a fixed figure on it.
Why clients in Broughton choose us
- 12-month guarantee on workmanship
- Specification-led, product-correct work
- Health and safety: CHAS accredited
- One phone line for London, the South East and Scotland
See our cost guide or our accreditations.
Fire stopping in Broughton: the local picture
Fire stopping of openings and penetrations in England falls under Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Either way, we install the specified product to its tested detail. At about 37 miles from central London, Broughton is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls.
Older community buildings such as Church of St James that have been rewired or given new heating can have service gaps through walls worth checking against the specification. At a college such as Buckinghamshire College Group, which lies west of Broughton, checking penetration seals after summer M&E works is good practice.
Broughton is about 2 miles east of Aylesbury, in Buckinghamshire. If you’re looking for fire stopping in Broughton, we can help. 308 places across Buckinghamshire fall within our area, Broughton among them. Our Oxford page has more on work in that area, about 20 miles away.
We cover the HP22 postcode districts. For a building on Nutmeg Close, Foxtail Close and Herald Street or nearby, send details and we will quote for service penetrations. Close to Broughton, our area also takes in Burcott (1 mile north-west), Broughton Crossing (1 mile west), Bierton (1 mile north-west), Bedgrove (1 mile south) and Turnfurlong (1 mile south-west). A short drive away, we cover High Wycombe (14 miles south), Chesham (10 miles south-east), Buckingham (15 miles north-west), Amersham (13 miles south-east), Princes Risborough (7 miles south) and Haydon Hill (3 miles west).
Landmarks near Broughton
In Broughton, that means premises near The Dog House, Stocklake Park Community School and Aylesbury Grammar School. For rail, the closest station is Aylesbury station, about 2 miles south-west. A little further out are Friars Square (1.9 miles west) and Roald Dahl Children's Gallery (1.9 miles west). Not far away are Dancersend Nature Reserve and Haddington Hill.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Any old material is cut back to clean, sound faces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. For a site in Broughton, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Tell us which areas need to stay in use
- Have the specification and drawings to hand
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, call 01277 525 020 or use the quote form.
Advice
What we’re called out for in Broughton
Fire stopping can get squeezed at the end of a programme, or done by whoever is on site. That is how unsuitable products and improvised details end up in compartment walls.
What tends to prompt an enquiry:
- Hidden openings found during inspections
- Damaged fire seals in risers and voids
- Builders’ foam or ordinary silicone in compartment walls
- Penetration schedules that need working through
Hospital estates such as Royal Buckinghamshire Hospital (1.9 miles west of Broughton) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
What your quote should include
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- What site paperwork they can supply
- Health and safety accreditation such as CHAS
- How long is the guarantee, and what does it include?