Fire stopping in Brogdale
Fire-rated and intumescent sealing of service penetrations and linear gaps throughout Brogdale and nearby, by CSCS-carded applicators. Fully insured and CHAS accredited.
- Hidden openings found during inspections
- Service penetrations left open after M&E works
- Fire-rated sealant that has cracked or shrunk back
Fire stopping near Brogdale
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our fire stopping in Brogdale
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it. With no specification in place, the first step sits with your designer or fire engineer, not with us. The enquiries we see most involve service penetrations left open after M&E works and old intumescent sealant that has split away, on small duct penetrations where the tested detail allows, service gaps in risers and linear gaps at wall heads. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Brogdale, that means joint design, primers and backing rod as standard.
Barn and farm-building conversions near places like Brogdale often combine new partitions with old walls. A penetration seal only performs as tested if product, substrate, service, gap and depth all match the detail.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Location
- Brogdale (ME13)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
How a job runs
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. Smaller jobs around Brogdale can be grouped with others nearby. You’ll have a fixed quote before work starts.
- First we confirm the product and tested details named in the specification.
- We sort the openings by the detail each one needs.
- Old or wrong materials are cut out.
- Mineral wool or other backing is fitted where required.
- Fire-rated or intumescent sealant goes in around the services and is tooled off.
- Completed areas are checked with you, with the records agreed when we quoted.
Getting the site ready
- Clear stock, furniture or equipment away from the joints
- For older buildings, check the asbestos register before work
- Explain the parking and delivery arrangements
Getting a fixed quote
Let us know the site, the scope and your timescale, and we will put a fixed quote together. The easiest way is to speak to us on 01277 525 020 or use the quote form.
Related advice
Brogdale: questions and answers
Can you seal penetrations in a hotel in Brogdale after a refit?
Yes. We install fire-rated and intumescent sealant where it is specified. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we will tell you if the detail calls for a collar, wrap or batt instead.
How does the move away from BS 476 affect penetration seals in Brogdale?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Does the weather affect the work?
It can, for external work. Sealant won’t bond properly to a wet or frosty joint, so external work may be moved if conditions aren’t right. Internal work is far less affected.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Is the work guaranteed?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, though not damage or work by other trades.
Can you work while the building is occupied?
Typically, yes. We phase the work so most of the building stays in use.
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Brogdale can form part of a wider programme.
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Fire-rated sealing for Brogdale buildings
At about 44 miles from central London, Brogdale is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail.
Halls and meeting rooms at places like Church of St Peter and St Paul sometimes gain new services, and any compartment wall crossed needs the specified seal. For a school such as Ospringe Church of England Primary School, penetration sealing fits best at the end of the summer works.
Brogdale is about 1 mile south-west of Preston, in Kent. Our applicators travel to Brogdale for work on service penetrations, handled exactly as we handle every other area. Our Kent coverage takes in 931 places. Sites around London have their own page, roughly 44 miles from Brogdale.
If you need fire stopping in ME13, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. If your building is just outside Brogdale, we cover Whitehill (1 mile east), Ospringe (1 mile north), Preston (1 mile north-east), Faversham (1 mile north-east) and Davington (2 miles north-east). A short drive away, we cover Maidstone (15 miles west), Ashford (11 miles south), Canterbury (9 miles east), Sittingbourne (6 miles north-west), Whitstable (8 miles north-east) and Herne Bay (12 miles east).
Local landmarks in Brogdale
We work on buildings around The Alma pub and The Abbey School. Brogdale’s nearest station is Faversham station, roughly 1.3 miles north-east. Other landmarks nearby include Newnham Castle (3 miles west).
Surface by surface
Linear joints
Joints at the top of partitions may need to move as the slab above deflects. We use the product and backing the detail names for that movement.
Risers and ceiling voids
Service risers and the voids above ceilings are where openings collect. Access to these areas is planned with you in advance, including keys, permits and any isolations.
Other services in Brogdale
When it isn’t the sealant
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Reviewing a building’s overall fire safety
- Construction that lacks the fire resistance the seal relies on
- Writing the fire-stopping specification
If in doubt, give us a call on 01277 525 020 or email us and we will say what we think before you book.
Surfaces we seal
- Joints between fire-resisting walls and floors
- Cable penetrations
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Linear gaps at wall heads
What we are called out for in Brogdale
Openings in fire-resisting walls usually appear when services are added or changed. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser leaves an opening that nobody returns to. Over a few years of fit-outs, a wall can collect a lot of these.
Things that usually lead to an enquiry:
- Openings found when ceilings come down for a refit
- Unsealed joints where partitions meet the slab
- Builders’ foam or ordinary silicone in compartment walls
- Improvised or mixed-product fire seals
Hotels like The Anchor Hotel (to the north of Brogdale) are refurbished in phases, and each phase can open up compartment walls.
Comparing quotes
- Will CSCS-carded applicators be on site?
- Whether old or failed sealant will be cut out, not overlaid
- Whether primer will be used where the manufacturer specifies it
- Which product they’ll use, and why it suits the joint
Site staff or a sealant specialist?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.