Fire-rated sealing and fire stopping in Broad Oak, Kent
Looking for fire stopping in Broad Oak? It’s simple: send details, get a quote, we seal, guaranteed.
- Damaged fire seals in risers and voids
- Openings left by services added after handover
- Unsealed penetrations discovered above suspended ceilings
Fire stopping for businesses in Broad Oak
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Broad Oak
For main contractors, our fire stopping package slots in after the M&E trades have finished in an area. To price a package, phone 01277 525 020 or email the details over with the schedule or marked-up drawings. Tell us what records you need and we will confirm with the quote. We work on pipe penetrations, small duct penetrations where the tested detail allows and service gaps in risers, and the usual reasons a site gets in touch are non-fire-rated filler around services and fire sealant pulled out of the opening. A single leaking joint is often how a building in Broad Oak first comes to us: we check the joints around it and give you an honest view of what needs doing now and what can wait.
A job near Broad Oak is normally planned around one visit, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job we finish is backed by a 12-month workmanship guarantee. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- Broad Oak (CT2)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Updated
- 3 November 2026
When it isn’t the sealant
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Designing or specifying fire stopping, which sits with the designer or fire engineer
- Construction that lacks the fire resistance the seal relies on
- Signing off or certifying a building’s fire stopping
Not sure which it is? You can speak to us on 01277 525 020 or email us and we’ll tell you honestly.
Surfaces we seal
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Cable penetrations
- Pipe penetrations
Leave it or put it right?
Inspections and handover checks often pick up fire stopping. Finding unsealed or improvised openings late can hold up a programme which is why earlier is better. Around Broad Oak, it’s better to renew all the failing joints at once. Send photographs of each area and we will quote for the lot.
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Why appoint us
- Constructionline member
- One contact handling all your sites
- Fully insured, including public liability cover
- 12 months’ guarantee on every job
See what affects the cost or our accreditations and insurance.
Nearby places to Broad Oak
What else we do in Broad Oak
Compartments and services around Broad Oak
At about 54 miles from central London, Broad Oak is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls, and the gaps need sealing with the specified product. Fire stopping of openings and penetrations in England falls under Approved Document B. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
At a university such as University of Kent, 2.3 miles south-west of Broad Oak, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. In a building such as St Nicholas' Church, any service penetration through a fire-resisting wall should be sealed to the specified detail. Large healthcare estates like Saint Martin's Hospital (2.2 miles south of Broad Oak) change their services often, so penetration seals are worth checking after M&E work.
Broad Oak is about 2 miles north-east of Canterbury, in Kent. Any commercial site in Broad Oak is covered, for single jobs and planned programmes alike. 931 places across Kent fall within our area, including Broad Oak. We also cover London, some 54 miles away.
Anyone looking for fire stopping in CT2 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Streets here include Porty Road, Madeleine Road and Dragon Way, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Sturry (1 mile east), Calcott (1 mile north), Westbere (2 miles east), Hicks Forstal (2 miles north-east) and Hersden (2 miles east). Bigger towns within reach include Margate (13 miles north-east), Dover (14 miles south-east), Ramsgate (13 miles east), Broadstairs (14 miles east), Whitstable (5 miles north-west) and Deal (14 miles south-east).
What’s near Broad Oak
We work on buildings around Chequer's Wood and Old Park, Spires Academy and Royal Oak Public House and the streets around them. Broad Oak’s nearest station is Sturry station, roughly 0.7 miles south-east. Other landmarks nearby include St Martins Hospital (2.2 miles south) and Whitefriars Shopping Centre (2.6 miles south-west). For a walk, there’s West Blean and Thornden Woods.
What the job involves on each surface
Metal pipes
Metal pipes conduct heat, so their details often call for extra measures along the pipe, and some details add wrapping or a set length of insulation. If the detail needs something beyond sealant, we tell you.
Linear joints
Head-of-wall joints often have to absorb slab deflection. The specified product and backing for that movement are what goes in.
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Check with the data sheet before painting over fire sealant
- Settle who seals which penetrations at the start of a project
- Treat an open penetration as a priority repair
- Don’t let anyone top up a fire seal with the wrong product
During planned inspections, look at seals in risers, cupboards and voids. Watch for cracked sealant, new services with no seal and openings that have grown.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
Diagnose, treat, sign off
On arrival, we report to your site contact and complete whatever induction the building runs. Floors, finishes and fittings next to the joints are covered before anything is cut or cleaned, and the work usually takes longer where risers, ceiling voids or occupied floors have to be worked through in sequence. Smaller jobs around Broad Oak can be grouped with others nearby. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
What we need from you
- Make sure the joints can be reached
- Let building users know which areas are affected
- Arrange parking or a loading space
Quotes
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price the work to it. For smaller jobs, photographs and a description will do.
Read more
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
Questions we are asked in Broad Oak
Can work at a site such as University of Kent fit around teaching?
Yes, holiday working periods are the norm on campus jobs. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
Would you work within a site like Saint Martin's Hospital?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
Can you reseal penetrations after our M&E works?
Yes, provided a specification covers them. New services after M&E works often breach existing seals, and we reseal them to the specified detail.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Will you quote for a small job?
Whatever the size, the process is the same: details, then a fixed price, then sealing, then a 12-month guarantee.
Do you approve fire stopping for building control?
No. Sign-off isn’t ours to give, and we don’t hold a third-party installer certificate. We work to the specification and the manufacturer’s installation guidance.
How much does the work cost?
Every job gets its own fixed quote. For yours, phone 01277 525 020 or send details through our quote form with a description of the work.