Brick Hill fire stopping
Fire stopping in Brick Hill, backed by over 20 years in commercial sealing. Fully insured, with a 12-month guarantee.
- Penetration schedules that need working through
- Old intumescent sealant that has split away
- Unsealed penetrations discovered above suspended ceilings
Fire stopping across Brick Hill
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
General trades versus a specialist
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
What you see is the finished bead, but most of the work is hidden. Backing rod, primer where specified and a joint designed to move with the building are easy to get wrong without experience.
How we handle fire stopping in Brick Hill
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on sites in Brick Hill. If you are dealing with unsealed openings around new pipes and cables and snag lists that include open service penetrations, we can help, on service gaps in risers, linear gaps at wall heads and joints between fire-resisting walls and floors alike. Whether you call it commercial sealant work, mastic application or joint sealing, the work in Brick Hill is the same: failed joints cut out, faces prepared and the right sealant laid to the right depth.
For a smaller site near Brick Hill, we plan to do all the penetrations in one go, so send the specification and photographs first. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Brick Hill (GU24)
- Region
- Surrey
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Compartments and services around Brick Hill
Central London is about 25 miles from Brick Hill. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls. Approved Document B is the English guidance that covers fire stopping around openings and penetrations. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. Either way, we install the specified product to its tested detail.
Halls and meeting rooms at places like Church of St Saviour sometimes gain new services, and any compartment wall crossed needs the specified seal. Office fit-outs on sites such as Hersham Farm Business Park (3 miles east of Brick Hill) add cabling and pipework through fire-resisting walls, and fire-rated sealant goes in where the specification calls for it.
Brick Hill is about 5 miles north-west of Woking, in Surrey. Commercial clients in Brick Hill use us for work on service penetrations. Brick Hill is one of 379 places we cover in Surrey for service penetrations. Reading is covered too, around 16 miles from Brick Hill.
Postcode districts covered here: GU24 for service penetrations. Nearby places we also cover include Broomhall (1 mile north), Windlesham (1 mile west), Chobham (2 miles south-east), Sunningdale (2 miles north) and Coxhill Green (2 miles south-east). Bigger towns within reach include Guildford (9 miles south), Woking (5 miles south-east), Camberley (5 miles south-west), Farnham (13 miles south-west), Egham (5 miles north-east) and Walton-on-Thames (9 miles east).
Local landmarks in Brick Hill
In Brick Hill, that means premises near The Brickmakers pub, Charters School and Gracious Pond. The nearest railway station is Sunningdale station, roughly 1.3 miles north of the centre. Well-known places in the area include Chobham Museum (2 miles south-east) and Heatherwood Hospital (3.6 miles north-west). Not far away are St Ann's Hill and Virginia Water Lake.
Common problems we fix in Brick Hill
On a busy project, programme pressure can mean fire stopping is rushed or left to whichever trade is closest. That is when untested combinations creep in.
Clients typically get in touch after noticing one or more of the following:
- Old intumescent sealant that has split away
- Builders’ foam or ordinary silicone in compartment walls
- Fire stopping installed outside its tested range
- Service penetrations left open after M&E works
Schools such as Valley End CofE Infant School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards.
What to look for in a quote
- Their approach to joint depth and backing
- Health and safety accreditation such as CHAS
- Proof of insurance
- How the joint faces will be prepared and primed
Owners, agents and contractors
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Brick Hill can form part of a wider programme across Surrey.
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Quoting for work in Brick Hill
Before we quote, we look at:
- Whether old sealant has to be cut out first
- Joint width, depth and condition
- The total length or number of joints
- Distance, for remote addresses
The specified product makes a difference, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site rules also count.
Details that help us quote
For an accurate fixed quote, we need a clear picture of the site. Send us:
- Approximate linear metres or a joint schedule
- What the building is and how it’s used
- Where the site is, with the postcode
- Access details, including height
Every quote starts with the facts: what’s there, how much of it, how we reach it and what’s specified. Share whatever details you have and we will fill any gaps with a visit.
Nearby places to Brick Hill
What else we do in Brick Hill
Different surfaces, different methods
Plastic pipes
In a fire, plastic pipework melts away and leaves an opening. Small sizes are sometimes covered by an intumescent sealant detail, but many need a collar or wrap. We confirm material and size first and tell you if sealant isn’t the right product.
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. The gap is measured at the widest point so we know it sits within the tested range, and any that don’t are flagged.
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs in and around smaller places like Brick Hill are usually planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- First we go through the drawings, schedule or specification for the seals and raise any questions before we price.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- We apply the specified sealant to the depth and around the services as the detail shows.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Share your working hours and any access restrictions
- Tell us what induction or permit system the site runs
- Arrange parking or a loading space
Get a fixed quote
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, call 01277 525 020 or email the details over.
Related advice
Brick Hill: questions and answers
Will you plan work around the academic year at somewhere like Imperial College Silwood Park Campus?
Yes. We plan campus work around teaching, exams and residence turnarounds. We are CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
How does the move away from BS 476 affect penetration seals in Brick Hill?
References to BS 476 classes are being removed from Approved Document B from 2 September 2029, after which BS EN 13501-2 classification is the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
How long does a job like this take?
We plan the time on site around your programme and access. We will give you an estimate of time on site when we quote.
Do you need to see the site first?
Many jobs can be quoted from photos, drawings or a joint schedule. If the job needs a look first, we’ll arrange a visit.
Is Brick Hill in your area?
Yes. Brick Hill is in our area, within our coverage of Greater London, South East England and Scotland. For a quote, call 01277 525 020 or use the quote form.
Are you insured?
Yes. We are fully insured, including public liability cover.
Do you hold CHAS accreditation?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.