Fire Stopping in Bredhurst
Fire-rated and intumescent sealing of service penetrations and linear gaps in Bredhurst. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed openings around new pipes and cables
- Openings found when ceilings come down for a refit
Need fire stopping in Bredhurst?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Bredhurst
Where pipes, cables and other services cross a compartment wall or floor, the opening around them has to be closed so fire and smoke can’t move between compartments. Our part is installing fire-rated and intumescent sealant at those openings and along linear gaps, where the specification calls for it. Each seal follows the manufacturer’s tested detail rather than guesswork. We work on service gaps in risers, pipe penetrations and joints between fire-resisting walls and floors, and the failures we’re asked to look at most are old intumescent sealant that has split away and improvised or mixed-product fire seals. Looking for mastic applicators who cover Bredhurst? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
A job near Bredhurst is typically planned around one visit, with the specification and photographs sent in advance. We install to the specification and the manufacturer’s guidance, leaving design and sign-off with the designer and building control.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application, and we come back if anything isn’t right.
- Where
- Bredhurst (ME7)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quotes
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How the job changes by surface
Masonry and concrete
Core-drilled holes are neat; broken-out ones rarely are. Each gap is measured where it is widest so we know it sits within the tested range.
Drylining partitions
Holes in board are often cut larger than needed. If the gap exceeds the tested range, sealant alone won’t do and we will tell you what the detail says instead.
Do you need fire stopping in Bredhurst?
When a seal departs from its tested detail, the evidence no longer covers it. Gaps beyond the tested size, shallow sealant, no backing where it was needed, or products from different systems mixed together are the usual culprits.
If one of these sounds familiar, it’s time for a closer look:
- Penetration schedules that need working through
- Hidden openings found during inspections
- Improvised or mixed-product fire seals
- Fire seals cut back for extra cables and never reinstated
For an estates team at a campus like University for the Creative Arts - Rochester (4.3 miles north-west of Bredhurst), summer M&E works are normally followed by a round of penetration sealing.
Comparing quotes
- Who will actually carry out the work
- How the existing material will be dealt with
- Which product they’ll use, and why it suits the joint
- What the guarantee covers, and for how long
Why act early in Bredhurst
The longer openings stay, the more there tend to be: every new cable or pipe adds another. A schedule that is dealt with regularly stays manageable, rather than turning into a full building survey and reseal. Converted and older buildings near places like Bredhurst tend to move, and aged sealant cracks. The right product, sized to the joint, copes much better.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we will price your job on its own details.
Why us?
- Failed material removed, not covered up
- Fully insured
- Clear, fixed quotes
- CHAS accredited contractor
Take a look at how commercial sealant jobs are priced or our accreditations.
What sets the cost
To price the job, we consider:
- The product specified
- How much there is to seal
- The site’s rules and procedures
- Joint width, depth and condition
Pricing service penetrations depends on quantities, condition and access. Ask us for a fixed quote.
Sending details for a quote
A few photos plus some basic facts will normally do. Please tell us:
- Where the site is, with the postcode
- Rough lengths or quantities, or drawings if you have them
- Specification clauses that apply
- The type of building and who uses it
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, ring 01277 525 020 or email drawings and photos.
Commercial clients in Bredhurst
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we’ll confirm with the quote.
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Diagnose, treat, sign off
At the end of each section, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building around Bredhurst, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- We read the specification, drawings or penetration schedule you send and raise any questions before we price.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Tell us what induction or permit system the site runs
- Tell us which areas need to stay in use
- Share the asbestos register for older buildings
Getting a fixed quote
Send us photos, drawings or a joint schedule are often enough for a fixed quote. If the job needs a look first, we will arrange a site visit.
Read more
Towns and villages near Bredhurst
Also in Bredhurst
Penetration seals near Bredhurst
In England, Approved Document B covers fire stopping of openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. Bredhurst lies roughly 31 miles out from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
Theatres, wards and plant rooms at sites like Spire Alexandra Hospital, 2.2 miles west of Bredhurst, all have compartment walls crossed by services. Halls and meeting rooms at places like Church of St Peter sometimes gain new services, and any compartment wall crossed needs the specified seal.
Bredhurst is about 3 miles south-east of Chatham, in Kent. Bredhurst sits inside our coverage and the rest of Kent, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. Across Kent, 931 places are covered, Bredhurst among them. We also cover London, some 31 miles away.
Business premises anywhere in ME7 are within our area for service penetrations. Streets here include The Street, Fir Tree Grove and Hurstwood Road. If your building is just outside Bredhurst, we cover Dunn Street (1 mile south-west), Kemsley Street (1 mile east), Lidsing (1 mile west), Scragged Oak (1 mile south-east) and Lower Cox Street (1 mile south-east). Further afield, our area takes in Maidstone (5 miles south-west), Sittingbourne (7 miles east), Gravesend (11 miles north-west), Faversham (13 miles east), Northfleet (12 miles north-west) and Minster (11 miles north-east).
Landmarks near Bredhurst
In Bredhurst, that means premises near The Harrow pub, Levan Strice and Rainham School for Girls. The nearest railway station is Rainham (Kent) station, about 2.9 miles north-east of the centre. A little further out are Allington Castle (3.8 miles south-west) and KIMS hospital (3.2 miles south). Not far away are Burham Down and Boxley Hills.
Your questions answered
Can you work on a hospital site such as Spire Alexandra Hospital?
Yes. We work in healthcare settings as well as offices and schools. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Could you schedule work at a campus like University for the Creative Arts - Rochester for the vacation?
Yes, holiday working periods are the norm on campus jobs. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Can you tell us what fire stopping our building needs?
No. The specification comes from your designer, fire engineer or building control. Our role is installing what they specify, to the product’s tested detail.
Are you members of a third-party fire-stopping installer scheme?
No. We are not members of a third-party fire-stopping installer scheme. Our credentials are CHAS accreditation, Constructionline membership and CSCS-carded applicators, and we are fully insured. If your contract requires third-party installer certification, we are not the right fit for that package.
Do you certify or sign off fire stopping?
No. We don’t certify or sign off fire stopping, and we hold no third-party fire-stopping installer certificate. Our part is fitting the specified product to its tested detail, and any records you need can be confirmed with the quote.