Fire stopping in Brandy Hole
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Brandy Hole. Send details for a fixed quote.
- Openings found when ceilings come down for a refit
- Builders’ foam or ordinary silicone in compartment walls
- Improvised or mixed-product fire seals
Fire stopping near Brandy Hole
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Honest limits
Our job is the joint, not everything around it. On its own, sealant can’t deal with:
- Approving the work on behalf of building control
- Fire doors, dampers or other fire safety equipment
- Plastic pipes whose detail calls for a collar or wrap
If you’re not sure, just phone 01277 525 020 or send photos by email and we will give you a straight answer before you book.
Surfaces we seal
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
Fire stopping in Brandy Hole
Opened ceilings and riser doors often reveal service openings nobody sealed. Where the walls and floors already have a fire-stopping specification, we can work to it, matching the product and detail it names. With no specification in place, the first step sits with your designer or fire engineer, not with us. Most enquiries involve fire-stopping items raised at inspection or handover and builders’ foam or ordinary silicone in compartment walls, across linear gaps at wall heads, cable penetrations and joints between fire-resisting walls and floors. One point of contact handles commercial sealant work in Brandy Hole from the first photographs to the final walk-round, for single jobs and planned programmes alike.
Around smaller places like Brandy Hole, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- Brandy Hole (SS5)
- Region
- Essex
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What the job involves on each surface
Masonry and concrete
Openings through concrete vary from tidy cores to rough break-outs. The gap is measured at the widest point so we know it sits within the tested range.
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products, and we’ll say if that applies.
What happens if it’s left?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, so it makes sense to get it right first time. For buildings around smaller places like Brandy Hole, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Resealing early avoids that.
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Why appoint us
- Fixed quotes based on photos, drawings or a visit
- Work to your specification and the manufacturer’s guidance
- Public liability insurance in place
- Over 20 years of commercial sealing
What sets the cost
Before we quote, we look at:
- Travel to remote or island sites
- Phasing around occupants
- The total length or number of joints
- Induction, permit and paperwork requirements
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- How the joints are reached, and at what height
- Whether the building will be occupied during the work
- The asbestos register, for older buildings
- Photos of the joints, close up and from further back
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.
On site: what to expect
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Smaller jobs around Brandy Hole can be grouped with others nearby. You will have a fixed quote before work starts.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- Backing and fire-rated sealant are installed to the detail and tooled.
- We tell you about openings that need a different product.
What we need from you
- Tell us which areas need to stay in use
- For older buildings, check the asbestos register before work
- Share your working hours and any access restrictions
Ask for a quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or give us a call on 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Related advice
Fire-rated sealing for Brandy Hole buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. References to the older BS 476 classes are being removed from it from 2 September 2029, after which the European classification, BS EN 13501-2, is the route, subject to transitional arrangements. Our part stays the same: the specified product, installed to its tested detail. Brandy Hole is about 32 miles from central London. Office refits around the commuter belt bring new cabling through fire-resisting walls; the gaps need the specified seal.
Schools such as Riverside Primary School often have new data and services installed during holidays, and penetrations through fire-resisting walls should be checked afterwards. Hotels such as Oakland Hotel (1.1 miles north-west of Brandy Hole) rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. In a building such as St Thomas' Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
Brandy Hole is about 3 miles north of Rayleigh, in Essex. Across the SS5 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Brandy Hole is one of 644 places we cover in Essex for service penetrations. Sites around London have their own page, about 32 miles away.
Anyone looking for fire stopping in SS5 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Close to Brandy Hole, our area also takes in Hullbridge (1 mile south-west), South Woodham Ferrers (1 mile north-west), South Fambridge (2 miles east), Hockley (2 miles south-east) and North Fambridge (2 miles north-east). Further afield, our area takes in Chelmsford (10 miles north-west), Basildon (8 miles south-west), Brentwood (14 miles west), Maldon (7 miles north), Canvey Island (8 miles south) and Billericay (9 miles west).
Around Brandy Hole
We work on buildings around William de Ferrers School and Kendal Park and the streets around them. The closest station to Brandy Hole is South Woodham Ferrers station, about 1.6 miles north-west of the centre. Other landmarks nearby include Chartwell Private Hospital (5.7 miles south) and Rayleigh Castle (3.1 miles south). Green spaces nearby include Woodham Fen.
Places near Brandy Hole
More services for Brandy Hole
Brandy Hole: questions and answers
Can you work on a hospital site such as Chartwell Private Hospital?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
Is a smaller place like Brandy Hole outside your area?
Not at all. Brandy Hole is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
How do I request a quote?
The quote form is the simplest route, though you can also speak to us on 01277 525 020 or email us. Photos, drawings or a joint schedule help us quote quickly.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, but not damage, misuse or other trades’ work.
How long does a typical visit take?
It depends on the scope, but the work normally takes anything from one day to a planned run of visits, depending on the number of seals and the access. For bigger or phased jobs, we’ll set out a timescale with the quote.
Will fire-rated sealant work on every penetration?
No. Sealant is the right product only where the tested detail says so. Large openings, many plastic pipes and some ducts need collars, wraps, batts or boards, and we will tell you when that applies.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Sealant joints are maintenance items, so inspect them regularly.
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Building owners and managing agents use us on everything from one building to a spread of sites around Brandy Hole. One quote can cover more than one site, which keeps the paperwork simple.