Fire-rated sealing and fire stopping in Boarhills, Fife
Fire stopping for Boarhills, from a contractor working since 2005. Fully insured and CHAS accredited.
- Old intumescent sealant that has split away
- Fire seals cut back for extra cables and never reinstated
- Non-fire-rated filler around services
Fire stopping in Boarhills
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
How we handle fire stopping in Boarhills
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control; sign-off sits with them too. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance. Most enquiries involve non-fire-rated filler around services and old intumescent sealant that has split away, across cable penetrations, service gaps in risers and small duct penetrations where the tested detail allows. Looking for mastic applicators who cover Boarhills? Mastic Doctor has worked for contractors, FMs and building owners since 2005, CHAS accredited and a Constructionline member.
Refurbishments in small hotels, schools and care homes around places like Boarhills can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Location
- Boarhills (KY16)
- Wider area
- Fife
- Guarantee
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Work for main contractors and building owners
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Boarhills can sit alongside others in a wider programme.
Keeping the joints sound
For the best life from the joints:
- Flag new cables with no seal around them
- Record which product was used where
- Have penetrations checked while they can still be seen
- Don’t let anyone top up a fire seal with the wrong product
During planned inspections, look at seals in risers, cupboards and voids. Look for cracks, unsealed new cables and gaps that have been enlarged.
Ask every contractor who works in risers or voids to report openings they create. Small habits like this stop openings building up.
Diagnose, treat, sign off
Inspect, seal, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then the work is carried out to the specified product and detail, and the job ends with a walk round and sign-off. Travel to smaller Scottish places like Boarhills is planned so the job is finished in one visit where possible, which is why we ask for photographs and a full list first. Outside work also needs a suitable weather window.
- The specification and schedule come first, so we know which details apply.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Getting the site ready
- Agree which areas must stay open
- Let building users know which areas are affected
- Share your working hours and any access restrictions
Ask for a quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we’ll return a fixed quote that you can work with. If you have questions first, phone 01277 525 020 or email the details over.
Read more
Penetration seals near Boarhills
In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, with products tested for that end use. We install what’s specified, to the product’s tested detail.
Residences at universities like University of St Andrews (to the west of Boarhills) have compartment walls that must be resealed whenever services change. In a building such as Boarhills Parish Church And Churchyard, any service penetration through a fire-resisting wall should be sealed to the specified detail. On a hospital site such as St Andrews Community Hospital, which lies west of Boarhills, fire-rated sealant goes in where the specification calls for it, with the work planned around the estates team’s permits.
Boarhills is about 13 miles south-east of Broughty Ferry, in Fife. Any commercial site in Boarhills is covered. Boarhills is one of 132 places in Fife on our list. We also cover Dundee, around 15 miles from Boarhills.
Anyone looking for fire stopping in KY16 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. If your building is just outside Boarhills, we cover Kingsbarns (2 miles south-east), St Andrews (4 miles west), Crail (5 miles south-east), Kilrenny (6 miles south) and Arncroach (6 miles south-west). Bigger towns within reach include Leven (14 miles south-west), Cupar (12 miles west), Methil (15 miles south-west), Newport-on-Tay (12 miles north-west), Tayport (11 miles north-west) and Kennoway (15 miles south-west).
Local landmarks in Boarhills
Other landmarks nearby include Scotland's Secret Bunker (3.3 miles south) and St Andrews Community Hospital (3.9 miles west).
Also near Boarhills
More services for Boarhills
Your questions answered
Is Boarhills too far out for you?
Not at all. Boarhills is within our area. We work across every Scottish council area. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Which Scottish guidance covers penetration seals in Boarhills?
Under Scotland’s non-domestic Technical Handbook (clause 2.1.14), service penetrations should keep at least the wall or floor’s fire resistance duration, using products tested for their end use. We install what has been specified, to the manufacturer’s tested detail, while design and approval sit with the designer and the verifier.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
How do we ask for a quote?
The quote form is the simplest route, though you can also ring 01277 525 020 or send details through our quote form. Include photos or drawings if you have them.
Do your applicators hold CSCS cards?
Yes. Should the site need card details in advance, let us know and we’ll send them with the quote.
Can you handle several sites?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
What happens if it’s left?
A seal that doesn’t match its tested detail gives false comfort. The fix is to remove it and reinstall to the detail, and doing it once, properly, is cheaper. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Resealing early avoids that.
Pricing service penetrations depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Why us?
- Sealing commercial buildings since 2005
- Workmanship guaranteed for 12 months
- Our applicators hold CSCS cards
- Old sealant cut out, never sealed over
What we can’t put right
Honesty saves time and money. New sealant won’t cure:
- Signing off or certifying a building’s fire stopping
- Fire risk assessments, a job for a competent assessor
- Deciding what a wall or floor needs, which belongs to the designer
If you are not sure, just give us a call on 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Joints between fire-resisting walls and floors
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Linear gaps at wall heads
- Cable penetrations
- Service gaps in risers
Site staff or a sealant specialist?
Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.