Beansheaf Farm fire stopping
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Beansheaf Farm and the surrounding area. Send details for a fixed quote.
- Fire-stopping items raised at inspection or handover
- Fire-rated sealant that has cracked or shrunk back
- Head-of-wall gaps with no fire seal
Fire stopping near Beansheaf Farm
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
How we handle fire stopping in Beansheaf Farm
We are commercial sealant applicators, CHAS accredited and a Constructionline member, with CSCS-carded applicators on site. We hold no third-party fire-stopping installer certificate. We install the specified fire-rated sealant to its tested detail, and our workmanship carries a 12-month guarantee. We work on joints between fire-resisting walls and floors, cable penetrations and service gaps in risers, and the failures we are asked to look at most are unsealed joints where partitions meet the slab and old intumescent sealant that has split away. Most enquiries from Beansheaf Farm start with one failed joint and grow into a wider look at the building: we look at the rest while we are there and tell you what we find.
In places the size of Beansheaf Farm, fire-resisting walls and floors are found in schools, care homes, health centres and mixed-use buildings. Around those penetrations, fire-rated sealant is installed if specified, with depth, backing and gap all as tested.
Every job we finish is backed by a 12-month workmanship guarantee, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Beansheaf Farm (RG31, RG30)
- Region
- West Berkshire
- Guarantee
- 12 months on our workmanship
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Looking after the joints
After handover, these steps help:
- Make fire stopping part of every scope that crosses a fire-resisting wall
- Ask which product is in place before decorating
- Get seals inspected before ceilings and boxing close
- Ask the designer to confirm details early on refits
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged and get them dealt with.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate, which saves guesswork.
Work for main contractors and building owners
Building owners and managing agents use us on everything from one building to a spread of sites around Beansheaf Farm. One quote can cover more than one site, so there’s one set of paperwork to deal with.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
What affects the price in Beansheaf Farm
There’s no standard rate for sealant work, because every site is different. What we look at:
- Access and working height
- Induction, permit and paperwork requirements
- Backing rod, priming and other preparation
- Location, for remote and island sites
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Sending details for a quote
A good diagnosis starts with the right details. Tell us:
- Whether an asbestos survey exists
- The product your specification calls for
- Approximate linear metres or a joint schedule
- What the building is and how it’s used
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, ring 01277 525 020 or email us.
From enquiry to sign-off
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then reopened once the sealant allows before we move to the next. For a site in Beansheaf Farm, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- We read the specification, drawings or penetration schedule you send.
- On site, each opening is checked against the tested detail it is meant to follow.
- Unsuitable fillers and loose debris are taken out of each opening.
- We fit the backing the detail asks for, to the stated depth.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- If an opening needs something other than sealant, we tell you instead of improvising.
Before we start on site
- For older buildings, check the asbestos register before work
- Make sure the joints can be reached
- Send any specification or drawings in advance
Get a fixed quote
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. The easiest way is to call 01277 525 020 or email drawings and photos.
Read more
Surface by surface
Cables and cable bundles
New data and power cables are the most common breach we see. Openings around new cables are resealed to the detail, and we tell you if the bundle exceeds what sealant covers.
Small ducts
Small ductwork can sometimes be sealed with sealant where the tested detail includes it. Bigger ducts and fire-resisting ductwork are normally handled with other products, and we’ll say if that applies.
Places near Beansheaf Farm
What else we do in Beansheaf Farm
Compartment walls and floors in Beansheaf Farm
For England, the fire stopping of penetrations is dealt with in Approved Document B. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail. The area within 2 miles of Beansheaf Farm holds several hotels. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail.
Theatres, wards and plant rooms at sites like Prospect Park Hospital, 1.5 miles north-east of Beansheaf Farm, all have compartment walls crossed by services. In a retail centre such as Meadway Shopping Centre, which lies north-east of Beansheaf Farm, any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail.
Beansheaf Farm is about 3 miles west of Reading, in West Berkshire. Looking for fire stopping in Beansheaf Farm? We can help, as we do across West Berkshire. 140 places across West Berkshire fall within our area, Beansheaf Farm among them.
Postcode districts covered here: RG31 and RG30. Buildings on Mill Lane, Curtis Road and Barclay Road are within our area. Nearby places we also cover include Calcot (1 mile north-west), Fords Farm (1 mile east), Horncastle (1 mile north-east), Burghfield Bridge (1 mile south-east) and Tilehurst Within (1 mile north-east) for service penetrations. A short drive away, we cover Newbury (12 miles west), Thatcham (10 miles west), Burghfield Common (3 miles south), Speenhamland (12 miles west), Shaw (12 miles west) and Burghfield Hill (3 miles south).
Near you in Beansheaf Farm
In Beansheaf Farm, that means premises near Little Heath School, Murdochs pub and Calcot Park, among other places. The nearest railway station is Theale station, about 1.4 miles west of the centre. Other landmarks nearby include Broad Street Mall (3.1 miles east) and Battle Hospital (2.4 miles north-east). Green spaces nearby include Hosehill Lake and Moor Copse Nature Reserve.
FAQs: Beansheaf Farm
Does your area include sites such as Arlington Business Park, near Beansheaf Farm?
Yes. We cover Beansheaf Farm and the area around it, including industrial estates, business parks and retail parks such as Arlington Business Park. Photos and a short description are enough for a first look.
Will you plan work around the academic year at somewhere like University of Reading?
Yes. Education sites typically want the work in vacations or in phases during term, and we plan to suit. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Is BS 476 being phased out?
From 2 September 2029, Approved Document B in England drops its references to BS 476 classes, with transitional arrangements set by the Government. The European route, BS EN 13501-2, then applies. Product selection stays with your designer.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Do you cover Beansheaf Farm?
Yes. Sites across Beansheaf Farm are covered, with one number for every area we cover.
Can you handle several sites?
Yes. Multi-site work and planned programmes are a core part of the service, planned site by site to suit how each building is used.
Do you work in Scotland as well as England?
Building standards in Scotland are separate from England’s, and England uses Approved Document B. Wherever the site is, our work follows the specification and the tested detail.
Do you need fire stopping in Beansheaf Farm?
Most open service penetrations are left by later work. A new cable pulled by an electrician, a pipe rerouted by a plumber or a data run drilled through a riser can leave the hole behind. Over a few years of fit-outs, a wall can collect a lot of these.
It’s worth sending us details if you spot any of the following:
- Openings found when ceilings come down for a refit
- Improvised or mixed-product fire seals
- Unsealed openings around new pipes and cables
- Non-fire-rated filler around services
For an estates team at a campus like University of Reading, which lies east of Beansheaf Farm, summer M&E works are normally followed by a round of penetration sealing.
Before you book anyone
- Whether primer will be used where the manufacturer specifies it
- How the existing material will be dealt with
- Is the sealant right for the movement and the substrate?
- Is depth set with backing rod, or bond-breaker tape in shallow joints?