Fire Stopping in Bagnor
Work needed on a service penetration in Bagnor? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Penetration schedules that need working through
- Head-of-wall gaps with no fire seal
- Builders’ foam or ordinary silicone in compartment walls
Fire stopping in Bagnor
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Maintenance after handover
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Keep product data and details in the fire safety file
- Arrange inspection before areas are covered up
- Report damaged or disturbed seals as soon as they’re spotted
- Foam or ordinary sealant is never a fire-seal repair
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Some fire-rated sealants accept paint and some don’t, so check the product data first.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small; found late, it can be one of many.
Fire stopping for commercial buildings in Bagnor
We should be clear about what we do and don’t do. Deciding the specification sits with the designer, the fire engineer and building control. We fit the specified fire-rated sealant following that specification and the maker’s installation guidance on sites in Bagnor. We work on small duct penetrations where the tested detail allows, pipe penetrations and cable penetrations, and what we’re called in for most is openings found when ceilings come down for a refit and head-of-wall gaps with no fire seal. A single leaking joint is often how a building in Bagnor first comes to us: we look at the rest while we’re there and tell you what we find.
A job near Bagnor is normally planned around one visit, so send the specification and photos first. Design and sign-off belong to the designer or building control; we install what’s specified.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Where
- Bagnor (RG14, RG20)
- Wider area
- West Berkshire
- Cover
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Common questions from Bagnor clients
What does the BS 476 change mean for fire-rated sealant in Bagnor?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. The designer or fire engineer sets the specification, and we install the product to the manufacturer’s tested detail.
Can you work on a hospital site such as West Berkshire Community Hospital?
Yes, hospitals are one of the sectors we cover. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
How do we ask for a quote?
The quote form is the simplest route, though you can also give us a call on 01277 525 020 or email us. Include photographs or drawings if you have them.
Is any job too small?
Whatever the size, the process is the same: send details, get a fixed quote, we seal, guaranteed.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Do you have public liability insurance?
Yes. Mastic Doctor is fully insured, public liability included.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, with one point of contact.
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Fire doors, dampers or other fire safety equipment
- Signing off or certifying a building’s fire stopping
- Writing the fire-stopping specification
If in doubt, give us a call on 01277 525 020 or use the quote form and we will say what we think.
Surfaces we seal
- Pipe penetrations
- Small duct penetrations where the tested detail allows
- Cable penetrations
- Linear gaps at wall heads
- Joints between fire-resisting walls and floors
- Service gaps in risers
Leave it or put it right?
Sealing behind the M&E trades area by area beats a sweep at the end. Openings are visible, access is open and nothing has to be taken down, and the right detail can be checked at the time. One visit to deal with every failing joint makes more sense than several trips to a place like Bagnor, rather than one at a time. Photos of every joint help us quote for the whole job.
There’s no price list, since every building and every scope is different. For a fixed figure, call for a quote.
Why clients in Bagnor choose us
- Products installed to the manufacturer’s instructions
- A fixed quote before work starts
- Public liability insurance in place
- Constructionline member
See what affects the cost and our accreditations.
Places near Bagnor
Also in Bagnor
Quoting for work in Bagnor
These are the things that shape the price:
- Whether the work must be split into stages
- The site’s rules and procedures
- The size and state of each joint
- Quantities, in metres or numbers
Pricing service penetrations depends on how many there are, their condition and the access. Call for a quote.
What to include in your enquiry
There’s no need for a formal survey. A few details are enough to get going:
- Approximate linear metres or a joint schedule
- Access details, including height
- Where the site is, with the postcode
- Any dates the work must fit around
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. To get it moving, give us a call on 01277 525 020 or email us.
Different surfaces, different methods
Plastic pipes
Plastic pipes soften and collapse in a fire. Some intumescent sealants are tested on smaller plastic pipes, though larger ones typically call for a collar or wrap. We check the pipe material and diameter against the detail before we start.
Linear joints
Head-of-wall gaps, slab edges and wall junctions are linear joints. Their tested detail, under BS EN 1366-4, sets the width, depth, backing and movement allowed, and we work within it.
Compartment walls and floors in Bagnor
At about 54 miles from central London, Bagnor is within reach of the capital. Offices around the capital are refitted often, and the cabling that follows can breach fire-resisting walls. A good number of hotels sit less than 2 miles from Bagnor. In hotels, bedroom and corridor walls are normally fire-resisting, so services added in a refit need sealing with the specified product.
At a college such as Newbury College, which lies south-east of Bagnor, checking penetration seals after summer M&E works is good practice. Hotels such as The Vineyard Hotel, 0.7 miles west of Bagnor, rely on fire-resisting walls between bedrooms and corridors, and refits that add services leave penetrations to seal where fire-rated sealant is specified. For a building such as Parish Church of St Mary, new heating or data runs are the usual reason penetrations need sealing.
Bagnor is about 1 mile north-west of Newbury, in West Berkshire. Across the RG14 postcode area, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Our West Berkshire coverage takes in 140 places, large and small. We also cover Reading, around 16 miles from Bagnor.
We take on service penetrations across the RG14 and RG20 postcode area. Among the streets we cover are Bath Road, Pound Lane and Speen Lane, and sites on any of them can send details for a fixed quote. Just outside Bagnor, we also work in Speen (1 mile south), Donnington (1 mile north-east), Speenhamland (1 mile east), Stockcross (1 mile west) and Marsh Benham (2 miles west). Bigger towns within reach include Thatcham (4 miles east), Burghfield Common (12 miles east), Hungerford (7 miles west), Fords Farm (14 miles east), Little Heath (13 miles east) and Calcot (13 miles east).
Landmarks near Bagnor
We work on buildings around Trinity School, Victoria Park and The Starting Gate pub, among other places. The nearest railway station is Newbury station, about 1.5 miles south-east. Well-known places in the area include Donnington Castle (0.8 miles north-east) and British Balloon Museum & Library Ltd (1.3 miles south-east). Not far away are Rack Marsh.
On site: what to expect
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For work around Bagnor, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- The specification and schedule come first, so we know which details apply.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Foam, ordinary sealant and debris come out so the seal starts clean.
- The specified backing and sealant go in to depth and are finished neatly.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Warn occupants and staff about the work
- Share the asbestos register for older buildings
- Tell us your opening times and when work is allowed
Quotes
Send details, get a quote, we seal, guaranteed: that’s how every job runs. To take the first step, ring 01277 525 020 or use the quote form.