Fire stopping in Arthurlie
We carry out fire-rated and intumescent sealing of service penetrations and linear gaps in Arthurlie. Send photos or drawings for a fixed quote.
- Fire sealant pulled out of the opening
- Damaged fire seals in risers and voids
- Openings found when ceilings come down for a refit
Fire stopping in Arthurlie
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Common problems we fix in Arthurlie
Some seals fail because the wrong product went in: expanding foam or a general-purpose sealant pushed into a gap to tidy it. The opening looks sealed but has no fire test evidence behind it, so it has to come out.
Common reasons buildings call us in:
- Service penetrations left open after M&E works
- Seals that don’t match their tested detail
- Openings found when ceilings come down for a refit
- Penetration schedules that need working through
In a building such as Bourock Parish Church, any service penetration through a fire-resisting wall should be sealed to the specified detail.
What your quote should include
- Who will actually carry out the work
- What level of public liability insurance do they hold?
- Do they follow the manufacturer’s priming guidance?
- How the existing material will be dealt with
About our fire stopping in Arthurlie
Penetration seals are fire tested to BS EN 1366-3 and linear joint seals to BS EN 1366-4 and the results are classified to BS EN 13501-2. A rating such as EI 60 only holds when the product is installed as it was tested. Reproducing the tested arrangement on site is the part we take care of. If you have fire seals cut back for extra cables and never reinstated and non-fire-rated filler around services, we can put it right, on linear gaps at wall heads, joints between fire-resisting walls and floors and pipe penetrations alike. For commercial sealant work in Arthurlie, you deal with one contact from quote to sign-off, whether it’s one building or several.
Refurbishments in small hotels, schools and care homes around places like Arthurlie can leave gaps around new services. A round of checks after M&E work is good practice, and any gaps found are sealed where fire-rated sealant is specified.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Location
- Arthurlie (G78)
- Wider area
- East Renfrewshire
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
How the job changes by surface
Metal pipes
Heat travels along metal pipework, and some details add wrapping or a set length of insulation. We follow whatever the detail requires and flag anything we can’t match.
Risers and ceiling voids
Voids hide a lot of unsealed openings. We follow your schedule area by area, and note anything we find that isn’t on it.
Maintenance after handover
Once the work is signed off, these steps help:
- Look above ceilings when tiles are lifted for other jobs
- Ask the designer to confirm details early on refits
- Arrange inspection before areas are covered up
- Record which product was used where
Add risers, plant rooms and ceiling voids to routine fire-stopping checks. Look for cracks, unsealed new cables and gaps that have been enlarged.
Make reporting new openings part of every permit to work in service areas. It costs little and catches breaches early.
General trades versus a specialist
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Redoing a failed joint typically costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Why deal with it now?
Leave a penetration open and smoke and fire can cross into the next compartment far earlier than intended. While the openings can be reached, sealing them is normally straightforward. Left until ceilings are closed or a tenant moves in, the same work costs more access and more disruption. Renewing every failing joint on one visit is the sensible approach for a place like Arthurlie. Photos of each area help us quote the whole job.
The product called for affects the cost, as does the preparation each joint needs, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Why us?
- Failed material removed, not covered up
- Constructionline member
- Over 20 years of commercial sealing
- Workmanship guaranteed for 12 months
See how commercial sealant jobs are priced and our accreditations.
How a job runs
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then reopened once the sealant allows before the next one starts. Where we can, we combine work around Arthurlie with other jobs nearby. Let us know if your dates have any give.
- We start with your penetration schedule, drawings or specification.
- We plan the sequence of floors, risers and voids with you.
- We compare every service penetration with its tested detail before sealing.
- Unsuitable material is removed and the opening cleaned first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Warn occupants and staff about the work
- Confirm the product named in the specification
- Let us know about inductions and permits
Ask for a quote
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or send details through our quote form to discuss it first.
Read more
Fire stopping in Arthurlie: the local picture
Two care or nursing homes sit less than 2 miles from Arthurlie. Care settings depend on compartmentation, so service penetrations made during maintenance or refurbishment need sealing with the specified product. In Scotland, clause 2.1.14 of the non-domestic Technical Handbook expects service penetrations to keep at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. Our part is installing the specified fire-rated sealant to its tested detail.
Wherever services are added at a hospital such as Leverndale Hospital (2.9 miles north-east of Arthurlie) the compartment line has to be made good with the specified product. On estates like Roberston Street Industrial Estate (under half a mile north-west of Arthurlie), the wall between office and warehouse is often fire-resisting, and cables through it need the specified seal.
Arthurlie is about 3 miles north-west of Newton Mearns, in East Renfrewshire. Businesses, contractors and managing agents in Arthurlie use us for work on service penetrations, as part of our coverage of East Renfrewshire. Across East Renfrewshire, 18 places are covered, Arthurlie among them. We also cover Glasgow, around 6 miles from Arthurlie.
We take on service penetrations across the G78 postcode area, for business premises of every kind. If your site is on Water Road, Park Avenue and Main Street or close by, send details and we will quote for service penetrations. You will find Arthurlie on or near the A736. Sites close to Arthurlie are covered too, including Barrhead (1 mile north-east), Auchenback (1 mile east), Patterton (3 miles east), Deaconsbank (3 miles east) and Newton Mearns (3 miles south-east). Nearby towns on our patch include Giffnock (4 miles east), Clarkston (4 miles east), Merrylee (4 miles east), Thornliebank (3 miles east), Stamperland (5 miles east) and Eaglesham (6 miles south-east).
Landmarks near Arthurlie
The nearest railway station is Barrhead station, roughly 0.5 miles north of the centre. Well-known places in the area include Barrhead Museum (0.5 miles north-east) and Dykebar Hospital (1.9 miles north). Green spaces nearby include Neilston Pad and Brother Loch.
Also near Arthurlie
More services for Arthurlie
Common questions from Arthurlie clients
Can you work in a care home near Arthurlie with residents in?
Yes. We agree rooms and times with the manager and work a few areas at a time. Any site rules, from signing in to infection control, are agreed before we start.
Is Roberston Street Industrial Estate, near Arthurlie, within your area?
Yes. We cover Arthurlie and the area around it, including industrial estates, business parks and retail parks such as Roberston Street Industrial Estate. Photos and a short description are enough for a first look.
Can you quote from photographs?
That depends on the size and complexity of the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. Removing asbestos is a job for asbestos specialists, not us.
Do you guarantee your work?
Yes. Workmanship is guaranteed for 12 months on every job.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
When can the area be used after sealing?
We will confirm how long the chosen product needs to cure, and flag anything to keep off until it has cured.