Fire stopping in Aldingbourne
Commercial sealant work in Aldingbourne for contractors, FMs and building owners: fire-rated and intumescent sealing of service penetrations and linear gaps, with a fixed quote first.
- Unsealed openings around new pipes and cables
- Openings found when ceilings come down for a refit
- Unsealed joints where partitions meet the slab
Fire stopping across Aldingbourne
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
From enquiry to sign-off
Working in a building that stays open takes some planning. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. Smaller jobs around Aldingbourne can be grouped with others nearby. You will have a fixed quote before work starts.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out.
- The specified backing and sealant go in to depth and are finished neatly.
- We tell you about openings that need a different product.
Before we start on site
- Agree which areas must stay open
- Have the specification and drawings to hand
- Tell us what induction or permit system the site runs
Quotes
To get a fixed quote, phone 01277 525 020 or email drawings and photos with the site address and an outline of the work. Our quote form is another easy route.
Advice
How we handle fire stopping in Aldingbourne
Most of our fire stopping work happens after the building is up. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls. We close the openings listed on your schedule, using the specified sealant and detail. If you have openings found when ceilings come down for a refit and fire sealant pulled out of the opening, we can put it right, whatever the surface. Sealant contractors, mastic applicators, sealant specialists: whatever the job title on the order, in Aldingbourne it comes down to the same thing: failed joints cut out, faces prepared and the right sealant laid to the right depth.
Smaller places such as Aldingbourne still have buildings with fire-resisting walls and floors: schools, halls, care homes and commercial conversions. Any service penetration through those walls should be closed with the specified product, set out as its test evidence shows.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Aldingbourne (PO20)
- Region
- West Sussex
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Where services cross fire walls in Aldingbourne
A number of hotels sit less than 2 miles from Aldingbourne. Bedroom-to-corridor walls in hotels are normally fire-resisting, so new cabling or pipework through them has to be sealed to the tested detail. In England, Approved Document B covers fire stopping of openings and penetrations. From 2 September 2029, BS 476 references are being taken out of Approved Document B, leaving BS EN 13501-2 classification as the route, subject to the Government’s transitional arrangements. Either way, we install the specified product to its tested detail.
Residences at universities like University of Chichester (2.1 miles south-west of Aldingbourne) have compartment walls that must be resealed whenever services change. Older community buildings such as The Parish Church of St Mary that have been rewired or given new heating can have service gaps through walls worth checking against the specification. In a retail centre such as Arun Retail Park (3 miles south of Aldingbourne), any fire-resisting wall between units that is crossed by new services needs sealing to the tested detail.
Aldingbourne is about 3 miles north of Bognor Regis, in West Sussex. Our applicators travel to Aldingbourne for work on service penetrations, handled exactly as we handle every other area. Aldingbourne is one of 373 places we cover in West Sussex. Sites around Portsmouth have their own page, roughly 17 miles from Aldingbourne.
Anyone looking for fire stopping in PO20 gets the same process as the rest of our area: details, then a fixed price, then sealing and a 12-month guarantee. Streets here include Hook Lane and Park Lane. We also cover Nyton (1 mile east), Norton (1 mile north), Westergate (1 mile east), East Hampnett (1 mile north-west) and Crockerhill (1 mile north). Bigger towns within reach include Worthing (13 miles east), Bognor Regis (3 miles south), Chichester (4 miles west), Selsey (9 miles south-west), Littlehampton (7 miles east) and Rustington (8 miles east).
Landmarks near Aldingbourne
Around Aldingbourne, our work takes us to commercial buildings near Ormiston Six Villages Academy and the streets around them. The closest station to Aldingbourne is Barnham station, about 2.1 miles east. Nearby you will also find The Chichester City Museum (3.9 miles west) and Bognor Regis War Memorial Hospital (3.3 miles south).
Work for main contractors and building owners
We take on planned maintenance as well as one-off repairs: resealing failed joints building by building, on a schedule that suits your budget. Sites in Aldingbourne can sit alongside others in a wider programme across West Sussex.
Whether you’re a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
How the quote is worked out
To price the job, we consider:
- Whether old sealant has to be cut out first
- Which sealant the job calls for
- Backing rod, priming and other preparation
- Distance, for remote addresses
Pricing service penetrations depends on quantities, condition and access, plus any specification you’re working to. Call for a quote.
Sending details for a quote
Diagnosis starts before we arrive. Let us know:
- Approximate linear metres or a joint schedule
- Clear photographs of the problem areas
- Any dates the work must fit around
- Anything awkward about access or site hours
Tell us about the building, the joints and when you need the work done, and a fixed quote will follow. To get it moving, call 01277 525 020 or email the details over.
After the work
Your facilities or cleaning team can help the joints last. Pass these on to them:
- File the specified details where the next contractor can find them
- Put resealing into every M&E and fit-out package
- Ask which product is in place before decorating
- Agree the fire-stopping specification before services go in
After every round of M&E works, check that the openings created have been sealed. A short check at the end of each job saves a long hunt later.
A simple record of seal locations and products helps. It tells the next contractor exactly what to reinstate.
What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Approving the work on behalf of building control
- Openings that need collars, wraps, batts or boards rather than sealant
- Walls or floors that aren’t fire-resisting to begin with
If you are not sure, just call the office on 01277 525 020 or email the details over and we’ll give you a straight answer before you book.
Where we work in Aldingbourne
- Small duct penetrations where the tested detail allows
- Service gaps in risers
- Linear gaps at wall heads
- Pipe penetrations
- Cable penetrations
- Joints between fire-resisting walls and floors
Nearby places to Aldingbourne
Other services in Aldingbourne
General trades versus a specialist
Redoing a failed joint normally costs more than getting it right at the outset, since all of it has to come out and the faces be cleaned back again. That’s why many clients bring in a specialist from the beginning.
Using site staff can make sense for a small touch-up, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Aldingbourne: questions and answers
Would you work within a site like Bognor Regis War Memorial Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you seal service penetrations in hotels around Aldingbourne?
Yes, where fire-rated sealant is the specified product. It goes in to the manufacturer’s tested detail for the wall or floor and the services passing through, and we’ll tell you if the detail calls for a collar, wrap or batt instead.
Do your applicators hold CSCS cards?
Yes. We use CSCS-carded applicators.
Will you come and look before quoting?
It depends on the job. Simple work can often be priced from photographs, and bigger or more complex jobs normally get a visit.
What if there’s asbestos in the old mastic?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How do you choose the sealant?
Where there’s a specification, we use the product it names. Otherwise, we recommend a product to suit the joint’s movement, the substrate and the conditions, following the manufacturer’s guidance.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.