Albourne fire stopping
Our CSCS-carded applicators take on fire-rated and intumescent sealing of service penetrations and linear gaps in Albourne and the surrounding area. Send details for a fixed quote.
- Fire stopping installed outside its tested range
- Unsealed openings around new pipes and cables
- Head-of-wall gaps with no fire seal
Fire stopping in Albourne
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Fire stopping for commercial buildings in Albourne
Every service that crosses a compartment wall or floor leaves an opening, and that opening needs sealing to hold back fire and smoke. Our job is fitting fire-rated and intumescent sealant at those service penetrations, and along linear gaps, where it is the specified product. Each seal follows the manufacturer’s tested detail rather than guesswork. Most enquiries involve non-fire-rated filler around services and service penetrations left open after M&E works, across service gaps in risers, linear gaps at wall heads and pipe penetrations. Whoever orders the work in Albourne, the brief is usually the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Around smaller places like Albourne, penetration seals come up in schools, halls, pubs with rooms, care homes and farm buildings used as offices. If sealant is what the specification names, we install it around the services exactly as the maker’s detail sets out.
We stand behind the joints we seal with a 12-month guarantee. It covers how we prepared and applied the sealant.
- Place
- Albourne (BN6)
- Wider area
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Albourne
Do you take on work at healthcare sites like The Dene Hospital?
Yes. We work in healthcare settings as well as offices and schools. Work is phased so departments keep running, under the site’s own rules.
Do you cover business parks and estates near Albourne, such as Aviation Trading Estate?
Yes. Estates, retail parks and business parks around Albourne, Aviation Trading Estate among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Will you write the fire-stopping specification?
No. Deciding what is needed sits with the designer, fire engineer and building control. Our role is fitting the specified fire-rated sealant, following the maker’s tested details.
Is any job too small?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
What does an EI 60 rating mean?
The tests are BS EN 1366-3 for penetrations and BS EN 1366-4 for linear joints, and classification is to BS EN 13501-2. An EI 60 seal kept its integrity and insulation for 60 minutes as tested; installing to the detail is what carries that across to site.
What if there’s asbestos in the old mastic?
The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.
Diagnose, treat, sign off
When we get to site, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before anything is cut or cleaned, with the work itself usually taking anything from one day to a planned run of visits, depending on the number of seals and the access. Jobs in and around smaller places like Albourne are usually planned as a single visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We read the specification, drawings or penetration schedule you send and ask about anything unclear.
- On site, each opening is checked against the tested detail it is meant to follow.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
What we need from you
- Clear stock, furniture or equipment away from the joints
- Tell us which areas need to stay in use
- Send your site hours and access windows
Request a quote
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we’ll arrange a site visit if anything is unclear.
Related advice
Looking after the joints
Once the work is signed off, these steps help:
- Check with the data sheet before painting over fire sealant
- Flag new cables with no seal around them
- Ask the designer to confirm details early on refits
- File the specified details where the next contractor can find them
Once the seals are in, tell other trades they exist and must not be disturbed. Any seal cut back for a new service needs reinstating to its tested detail using the same product.
Regular walk-rounds of service areas are worth the time. Catching a damaged seal early keeps the fix small; found late, it can be one of many.
Fire-rated sealing for Albourne buildings
Approved Document B is the English guidance that covers fire stopping around openings and penetrations. Its BS 476 references are being withdrawn from 2 September 2029, with BS EN 13501-2 classification taking over, subject to transitional arrangements. What we install is set by the specification, and it goes in to the tested detail. Albourne lies roughly 39 miles out from central London. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls; the gaps need the specified seal.
For a unit at a site such as Aviation Trading Estate (0.9 miles south of Albourne), new power or data runs between office and warehouse can breach a compartment wall. Large healthcare estates like The Dene Hospital, 2.9 miles to the north-east of Albourne, change their services often, so penetration seals are worth checking after M&E work.
Albourne is about 4 miles south-west of Burgess Hill, in West Sussex. Albourne sits inside our coverage, with the same fixed quotes and 12-month guarantee as everywhere else. We work across 373 places in West Sussex, from busy centres to rural villages. Our Brighton page has more on work in that area.
Business premises anywhere in BN6 are within our area for service penetrations. If your building is just outside Albourne, we cover Albourne Street (1 mile east), Albourne Green (1 mile north-east), High Cross (1 mile north-west), Blackstone (1 mile west) and Woodmancote (2 miles south-west). Further afield, our area takes in Crawley (12 miles north), Horsham (10 miles north-west), Worthing (11 miles south-west), Haywards Heath (7 miles north-east), Burgess Hill (4 miles north-east) and Shoreham-by-Sea (7 miles south).
Local landmarks in Albourne
Albourne’s nearest station is Hassocks station, roughly 2.8 miles east. Other landmarks nearby include The Dene Hospital (2.9 miles north-east) and The Budding Foundation Museum of Gardening (2.5 miles east). For a walk, there’s Wolstonbury Hill and Woods Mill.
Places near Albourne
What else we do in Albourne
Common problems we fix in Albourne
Physical damage is another reason seals stop doing their job. Seals get knocked during maintenance, cut back to add a cable or pulled out when services are swapped and the opening isn’t always resealed.
If one of these sounds familiar, it’s time for a closer look:
- Builders’ foam or ordinary silicone in compartment walls
- Unsealed penetrations discovered above suspended ceilings
- Penetration schedules that need working through
- Openings left by services added after handover
Older community buildings such as The Parish Church of St Bartholomew that have been rewired or given new heating can have service gaps through walls worth checking against the specification.
Comparing quotes
- Their pre-qualification and accreditations
- What level of public liability insurance do they hold?
- How they’ll work around occupants
- Whether their applicators hold CSCS cards
How the quote is worked out
Quotes vary with the job. It mainly depends on:
- Phasing around occupants
- Any access equipment needed
- The site’s rules and procedures
- The size and state of each joint
Cost follows what’s involved: removing old material, preparing the joints, the product, the access and how the work is phased. Call for a fixed quote and we will explain how it’s made up.
What to include in your enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- Photos of the joints, close up and from further back
- The postcode of the building
- What the building is and how it’s used
- When you need the work done
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or email drawings and photos.
Should maintenance staff do it?
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
Why deal with it now?
Sealing behind the M&E trades area by area beats a sweep at the end. While the area is still open, every opening is easy to see and reach. Around Albourne, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Why appoint us
- Fully insured
- A fixed quote before work starts
- Sealing commercial buildings since 2005
- Health and safety: CHAS accredited
See our cost guide or how we’re accredited.