Fire Stopping in Aiginis
Fire-rated and intumescent sealing of service penetrations and linear gaps in Aiginis. CHAS accredited and fully insured, with a 12-month guarantee.
- Penetration schedules that need working through
- Openings left by services added after handover
- Non-fire-rated filler around services
Fire stopping across Aiginis
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Fire stopping in Aiginis
It helps to set out our role at the start. The designer, fire engineer or building control decides which fire stopping is required. What we bring is careful installation of the specified sealant, to the maker’s guidance in Aiginis and nearby. If you have fire stopping installed outside its tested range and unsealed penetrations discovered above suspended ceilings, we can put it right, on joints between fire-resisting walls and floors, linear gaps at wall heads and service gaps in risers alike. A single leaking joint is often how a building in Aiginis first comes to us: we look at the rest while we are there and tell you what we find.
Around smaller places such as Aiginis, compartment walls and floors tend to be in schools, hotels, care homes and community buildings. Where services pass through, specified fire-rated sealant is installed following the manufacturer’s guidance for that wall or floor.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application.
- Where
- Aiginis (HS2)
- Wider area
- Na h-Eileanan Siar
- Guarantee
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Common problems we fix in Aiginis
Head-of-wall joints and wall-to-wall junctions are frequent weak points. Deflection and building movement can open these gaps, and a product not tested for that movement may crack. Linear joint details set a width range and movement capability, and the seal has to sit within them.
Clients usually get in touch after noticing one or more of the following:
- Snag lists that include open service penetrations
- Fire sealant pulled out of the opening
- Improvised or mixed-product fire seals
- Expanding foam used as fire stopping
Where a unit on an estate such as Parkend Industrial Estate, which lies west of Aiginis, has fire-resisting walls between offices and warehouse, any new service through them should be sealed to the tested detail.
Comparing quotes
- Their pre-qualification and accreditations
- Which product they’ll use, and why it suits the joint
- Will RAMS and insurance details be available?
- Their plan for phasing and protecting the area
Work for main contractors and building owners
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Why deal with it now?
The longer openings stay, the more there tend to be: every new cable or pipe adds another. A schedule that is dealt with regularly stays manageable and avoids a much larger catch-up later. In Scotland, wind-driven rain finds a failed joint quickly, so it’s worth renewing joints around Aiginis before they leak.
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Why choose Mastic Doctor in Aiginis
- Joints cleaned back to sound surfaces
- CSCS-carded applicators
- Fully insured
- 12-month guarantee on workmanship
Take a look at how commercial sealant jobs are priced and our accreditations.
Where services cross fire walls in Aiginis
For an island location such as Aiginis, work is planned around ferry crossings and the weather. Photos of each opening and the specification mean the right products make the trip. Scotland has its own building standards: the non-domestic Technical Handbook (clause 2.1.14) says service penetrations should be fire stopped to at least the fire resistance duration of the wall or floor, using products tested for the way they’re used. We install fire-rated sealant to that tested detail where it is specified.
Hospital estates such as Western Isles Hospital (to the west of Aiginis) are divided into fire compartments, and any service penetration through them should be sealed to the specified, tested detail.
Aiginis (Gaelic: Aignish) is in Na h-Eileanan Siar. Commercial clients in Aiginis can call on us for service penetrations, as part of our coverage of Na h-Eileanan Siar. We work across 87 places in Na h-Eileanan Siar, from busy centres to rural villages.
Postcode districts covered here: HS2 for service penetrations. If your building is just outside Aiginis, we cover Na h-Eileanan an Iar (1 mile north-east), Knock (1 mile east), Lower Bayble (2 miles east), Garrabost (2 miles north-east) and Pabail Uarach (3 miles east). Where a site is remote or on an island, we plan travel and materials carefully, so the full address helps from the start.
Landmarks near Aiginis
A little further out are Lewis Loom Centre (3.8 miles west) and Western Isles Hospital (3.8 miles west).
Aiginis: questions and answers
Can you work at a site such as Parkend Industrial Estate, by Aiginis?
Yes, sites like Parkend Industrial Estate are within our area, along with the rest of Aiginis. To start, just speak to us on 01277 525 020 or email us with the unit, the joints involved and your access times.
Can you take on a job at a hospital such as Western Isles Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photos and a postcode.
Will you write the fire-stopping specification?
No, we don’t design fire stopping. Once you have a specification, we can price and install the sealant elements of it.
Do you seal on top of existing sealant?
No. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
How long does a job like this take?
That varies with the scale of the job, though a typical visit usually takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Aftercare for building managers
Your facilities or cleaning team can help the joints last. Pass these on to them:
- Report damaged or disturbed seals as soon as they’re spotted
- Ask which product is in place before decorating
- Ask the designer to confirm details early on refits
- Arrange inspection before areas are covered up
Give the sealant its full cure time before ceilings, boxing or decoration go over it. Not every fire-rated product can be painted.
On fit-outs, get the fire-stopping specification agreed before the services go in. The designer can then choose details that suit the services planned, and the work runs in step with the M&E.
From enquiry to sign-off
Before we leave any area, the masking comes off, the area is cleaned and every joint is checked with your site contact. Where the sealant needs time to cure before use, we tell you and sign the area. Tell us who will meet us and how to get in at your building near Aiginis. We will confirm the plan with the fixed quote.
- We start with your penetration schedule, drawings or specification.
- Access, permits and the order of areas are agreed with the site team.
- Each opening is checked for wall or floor type, service, gap and depth.
- Foam, ordinary sealant and debris come out first.
- Backing and fire-rated sealant are installed to the detail and tooled.
- Anything outside the detail is reported to you rather than sealed.
Before we start on site
- Send any specification or drawings in advance
- Tell us what induction or permit system the site runs
- Move anything stored against the joints
Getting a fixed quote
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.
Related advice
Nearby places to Aiginis
Other services in Aiginis
General trades versus a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.