Fire-rated sealing and fire stopping in Adisham, Kent
Need fire stopping in Adisham? It’s simple: send details, get a quote, we seal, guaranteed.
- Fire-stopping items raised at inspection or handover
- Damaged fire seals in risers and voids
- Unsealed openings around new pipes and cables
Fire stopping for businesses in Adisham
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
What affects the price in Adisham
These are the things that shape the price:
- The total length or number of joints
- Phasing around occupants
- Location, for remote and island sites
- Whether old sealant has to be cut out first
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote and we’ll put a fixed figure on it.
Details that help us quote
Diagnosis starts before we arrive. Tell us:
- Drawings or a marked-up plan, if available
- The product your specification calls for
- Whether an asbestos survey exists
- Clear photographs of the problem areas
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.
Fire stopping in Adisham
A lot of fire-stopping work comes after M&E installation, a refit or a tenant fit-out. New cable runs, replaced pipework and extra data routes all punch holes in compartment walls, often unnoticed. Those on your schedule are closed with the specified product. We work on cable penetrations, pipe penetrations and joints between fire-resisting walls and floors, and the failures we are asked to look at most are fire sealant pulled out of the opening and non-fire-rated filler around services. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Adisham, that means joint design, primers and backing rod as standard.
For a smaller site near Adisham, we plan to do all the penetrations in one go, so send the specification and photographs first. Design and sign-off belong to the designer or building control; we install what’s specified.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Adisham (CT3)
- Region
- Kent
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Keeping the joints sound
Once the work is signed off, a little attention goes a long way:
- Keep general-purpose fillers away from compartment walls
- File the specified details where the next contractor can find them
- Flag new cables with no seal around them
- Arrange inspection before areas are covered up
Never top up a fire seal with foam, ordinary silicone or filler. Repairs need the same product and detail as the original, or a new specification from the designer.
Keep a register of where seals are and what they are made of. When a new service goes through, everyone knows which product and detail to match, which saves guesswork.
When to call us in Adisham
A common fault is a product that was never fire-rated in the first place: expanding foam or a general-purpose sealant pushed into a gap to tidy it. It may look closed, but it has no tested fire performance in that position.
If one of these sounds familiar, it’s time for a closer look:
- Improvised or mixed-product fire seals
- Damaged fire seals in risers and voids
- Fire-stopping items raised at inspection or handover
- Unsealed penetrations discovered above suspended ceilings
For a school such as Adisham Church of England Primary School, penetration sealing fits best at the end of the summer works.
Comparing quotes
- How joint depth will be controlled
- How the existing material will be dealt with
- Their public liability cover
- Is the sealant right for the movement and the substrate?
Questions about Adisham
What does the BS 476 change mean for fire-rated sealant in Adisham?
Approved Document B loses its BS 476 references from 2 September 2029, and BS EN 13501-2 becomes the route, subject to transitional arrangements. Whichever applies, we install the specified product to its tested detail; the specification is for the designer to set.
Can you work on a hospital site such as St Martins Hospital?
Yes, provided the work is planned with the site’s estates team. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Are you insured?
Yes. Our insurance certificate can be sent alongside the quote.
How long does a typical visit take?
That varies with the scale of the job, though a typical visit typically takes a single visit for a short list of penetrations, or a phased programme for a whole building. Larger or phased jobs take longer, and we will give you a timescale with the quote.
Are you CHAS accredited?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
Do you take on multi-site work?
Yes. We take on portfolio and planned maintenance work, planned site by site to suit how each building is used.
Do you guarantee your work?
Yes. It runs for twelve months and covers how we prepared and sealed the joints, but not damage, misuse or other trades’ work.
How the job changes by surface
Cables and cable bundles
New data and power cables are the most common breach we see. We reseal around them to the specified detail, and any bundle too large for sealant alone is flagged.
Metal pipes
Heat travels along metal pipework, and some details add wrapping or a set length of insulation. If the detail needs something beyond sealant, we tell you.
Penetration seals near Adisham
For England, the fire stopping of penetrations is dealt with in Approved Document B. The national BS 476 classes are due to drop out of it from 2 September 2029, leaving the European BS EN 13501-2 route, subject to transitional arrangements. We install whatever has been specified, to the product’s tested detail. At about 58 miles from central London, Adisham is within reach of the capital. Business park offices in the commuter belt are refitted as tenants change, and each fit-out adds services through compartment walls.
At a university such as Canterbury Christ Church University, 4.8 miles to the north-west of Adisham, labs, lecture blocks and residences are re-serviced often, so penetration seals are best checked after M&E work. At a healthcare site like St Martins Hospital, 4.3 miles to the north-west of Adisham, new services through compartment walls are a constant, and each needs the specified seal.
Adisham is about 5 miles south-east of Canterbury, in Kent. We cover commercial sites throughout Adisham, for single jobs and planned programmes alike. We work across 931 places in Kent. There’s a separate page for London, roughly 58 miles from Adisham.
Postcode districts covered here: CT3 for service penetrations. Streets here include Station Road, The Street and Church Lane, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Bloodden (1 mile south-east), Aylesham (1 mile south), Bramling (2 miles north), Bekesbourne (2 miles north-west) and Womenswold (2 miles south) for service penetrations. Bigger towns within reach include Canterbury (5 miles north-west), Margate (13 miles north-east), Dover (9 miles south-east), Folkestone (11 miles south), Ramsgate (12 miles north-east) and Broadstairs (13 miles north-east).
What’s near Adisham
There’s a railway station in Adisham itself: Adisham station. A little further out are St Martins Hospital (4.3 miles north-west).
When it isn’t the sealant
Honesty saves time and money. Fresh joints won’t solve:
- Large openings beyond what any sealant detail covers
- Deciding what a wall or floor needs, which belongs to the designer
- Approving the work on behalf of building control
If in doubt, call the office on 01277 525 020 or send details through our quote form and we’ll say what we think before you book.
Where we work in Adisham
- Joints between fire-resisting walls and floors
- Linear gaps at wall heads
- Small duct penetrations where the tested detail allows
- Pipe penetrations
- Service gaps in risers
- Cable penetrations
Our process
Inspect, seal, sign off: every visit follows that pattern. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. Smaller jobs around Adisham can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- First we go through the drawings, schedule or specification for the seals.
- Every penetration is compared with its detail: wall or floor type, service, gap size and depth.
- Anything that doesn’t belong in the opening, such as expanding foam or general-purpose filler, is removed.
- Mineral wool or other backing goes in wherever the detail asks.
- Fire-rated or intumescent sealant is gunned in to the specified depth, then tooled.
- Openings that need a collar, wrap, batt or other product are flagged to you rather than filled with sealant.
Before we start on site
- Arrange parking or a loading space
- Send your site hours and access windows
- Agree which areas must stay open
Request a quote
Quotes are fixed against the scope you send, so the cost is agreed before work starts. To ask for one, speak to us on 01277 525 020 or email drawings and photos.