Facade and window perimeter sealing in Wickhambreaux, Kent
Facade sealing for Wickhambreaux, from a contractor working since 2005. Fully insured and CHAS accredited.
- Cold air coming in at window perimeters
- New sealant peeling off old mastic
- Failed sealant on precast panel joints
Facade sealing for Wickhambreaux sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Common questions from Wickhambreaux clients
Will you plan work around the academic year at somewhere like Canterbury Christ Church University?
Yes. Education sites usually want the work in vacations or in phases during term, and we plan to suit. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Do you cover business parks and estates near Wickhambreaux, such as Wingham Industrial Estate?
Yes. Our area takes in Wickhambreaux and its surroundings, with estates and business parks such as Wingham Industrial Estate included. A few photographs and the unit address let us price the work.
Do you replace failed glazing units?
No. That work needs a glazing specialist. What we seal are the joints around frames and panels across the facade.
Can staff carry on working while you’re here?
Typically, yes. Phased work can be planned so areas stay in use, with each area protected and signed.
Should we check old sealant for asbestos?
For older buildings, yes, check before work starts. The dutyholder holds the asbestos register, and we will ask to see it. If asbestos is suspected, work stops until it is tested.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
How long do sealant joints last?
Nobody can honestly give a figure in years, since movement, weather, cleaning and use all affect it. Regular inspection is the best way to catch problems early.
Facade sealing for commercial buildings in Wickhambreaux
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We remove failed sealant and install a new bead chosen for the joint and how far it moves. We work on window and door perimeters, perimeter joints where frames meet the structure and shopfront frames, and the failures we’re asked to look at most are water coming in around window frames and draughts around frames and panels. Facilities teams, main contractors and managing agents in Wickhambreaux tend to want the same three things: a clear scope, tidy work and joints that don’t fail again.
Sites around smaller places like Wickhambreaux can be a fair drive from suppliers, so we come with everything the package needs, timed to the stage the job has reached. Send drawings or photographs and the programme and we will quote to suit.
We stand behind the joints we seal: 12 months, guaranteed. That covers our preparation and application.
- Location
- Wickhambreaux (CT3)
- Wider area
- Kent
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Our process
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. The work itself typically takes a day or two for a few elevations, and longer where access has to be moved around the building, and we clear our waste as we work. Smaller jobs around Wickhambreaux can be grouped with others nearby, which keeps travel down. You will have a fixed quote before work starts.
- Photos, drawings or a visit tell us about the joints and the access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and both faces cleaned back.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Preparing the site
- Clear stock, furniture or equipment away from the joints
- Tell us what induction or permit system the site runs
- Share the asbestos register for older buildings
Get a fixed quote
To get a fixed quote, phone 01277 525 020 or send photos by email. Our quote form is another easy route.
Advice
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Looking after the joints
After handover, these steps help:
- Add perimeter sealant to planned maintenance checks
- Brief window cleaners about newly sealed joints
- Ask about asbestos in pre-2000 mastic
- Don’t wait for a second leak before calling
Keep a note of which product went in and when. Future work can then match the product and colour.
Don’t wait for a full elevation to fail. Small repairs stop small leaks becoming large ones inside the building.
Building owners, agents and FMs in Wickhambreaux
Building owners and managing agents use us on everything from one building to a spread of sites around Wickhambreaux. Several sites can go on one quote, so there’s one set of paperwork to deal with.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Leave it or put it right?
Patch repairs over old sealant tend to come back. A full cut-out and fresh bead is the repair that holds. For buildings around smaller places like Wickhambreaux, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
No two sites price the same: joint size, product, access and site hours all play a part. Send the details and a fixed figure follows.
Why us?
- One phone line for London, the South East and Scotland
- Standard and matched colours in many product ranges
- Failed material removed, not covered up
- A Constructionline member, so easy to vet
See how commercial sealant jobs are priced or our accreditations and insurance.
What we’re called out for in Wickhambreaux
New sealant run over old sealant rarely holds. Fresh silicone won’t stick to cured silicone, so the new bead peels away within a season or two.
It’s worth sending us details if you spot any of the following:
- Weathered joints at frame-to-structure perimeters
- Facade joints cracked through the middle
- Air leaks through failed facade joints
- New sealant peeling off old mastic
On a healthcare site such as St Martins Hospital, 3.4 miles to the west of Wickhambreaux, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
What your quote should include
- Their plan for phasing and protecting the area
- How they handle RAMS and site documents
- How joint depth will be controlled
- How the existing material will be dealt with
Nearby places to Wickhambreaux
More services for Wickhambreaux
Contractors’ notes for Wickhambreaux
Wickhambreaux sits in one of the drier corners of the country, the South East. Winter mornings still bring frost and condensation on frames and panels, which is why external dates are agreed with the site manager. Wickhambreaux lies roughly 57 miles out from central London. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme.
On a campus such as Canterbury Christ Church University, 4.1 miles west of Wickhambreaux, new teaching buildings and residences are usually built and refurbished around the academic year. Older buildings in the area around Wickhambreaux, such as Goodnestone Park, 3.4 miles to the south-east of Wickhambreaux, need care when sealed: the product has to suit soft or historic materials.
Wickhambreaux is about 4 miles east of Canterbury, in Kent. Across the CT3 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Wickhambreaux is one of 931 places we cover in Kent for facade joints. Sites around London have their own page, roughly 57 miles from Wickhambreaux.
If you need facade sealing in CT3, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. For a building on The Street, Wickham Court Lane and Seaton Road or nearby, we can quote for facade joints. We also cover Seaton (1 mile east), Ickham (1 mile south), Littlebourne (1 mile south-west), Bramling (1 mile south) and Bekesbourne (2 miles south-west) for facade joints. Further afield, our area takes in Canterbury (4 miles west), Margate (11 miles north-east), Dover (11 miles south-east), Folkestone (14 miles south), Ramsgate (10 miles east) and Broadstairs (12 miles north-east).
Around Wickhambreaux
In Wickhambreaux, that means premises near The Rose Inn and Spires Academy. Wickhambreaux’s nearest station is Bekesbourne station, about 2.6 miles south-west. Other landmarks nearby include Canterbury Castle (4.8 miles west) and St Martins Hospital (3.4 miles west).