Facade and window perimeter sealing in Ickham, Kent
Facade joint and window perimeter sealing on commercial buildings throughout Ickham and nearby, by CSCS-carded applicators. CHAS accredited and fully insured.
- Draughts around frames and panels
- Perimeter joints where frames meet the structure
- Failed sealant on precast panel joints
Facade sealing near Ickham
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Aftercare for building managers
A few simple habits keep the new joints working:
- Insist on a full cut-out when joints are renewed
- Avoid harsh cleaners on facade sealant
- Plan facade sealing alongside redecoration
- Keep sills, gutters and drainage paths clear
Anything drilled through a facade joint breaks the seal. Make sure the joint is resealed afterwards using a matching sealant.
Coordinate facade sealing with other external works. One set-up for several trades saves money and limits disruption.
Facade sealing in Ickham
Managing agents and owners in Ickham ask us to, we reseal perimeters across whole elevations or a handful of problem windows. The approach doesn’t change with the size: old sealant out, faces cleaned, depth set and a new bead tooled in. Each job carries our 12-month guarantee. We work on shopfront frames, coping and flashing joints and stone and brick facade joints, and what we’re called in for most is cladding panel joints that have opened up and hard, chalky sealant that no longer flexes. A specialist sealant contractor works differently from a general builder: on jobs in Ickham, preparation and product choice get the time they need.
For a site near Ickham, the mastic visit is planned so the right sealants, primers and backing rod are on hand, timed to the stage the job has reached. Drawings, photos and the programme let us give a fixed quote.
Whoever the client is, the cover is the same: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Ickham (CT3)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Our process
We follow your site rules from the start: signing in, inductions and any permit to work. With the paperwork done, the joints are worked through in the order agreed with your site contact. Rural sites near Ickham may need directions, gate codes or a contact on site. Send that with the details and we’ll confirm the plan with the quote.
- Photos, drawings or a visit tell us about the joints and the access.
- We confirm the joint type, movement and the specified product.
- The existing bead comes out in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Before we start on site
- Let us know about inductions and permits
- Send your site hours and access windows
- Point out any areas we must not close
Get a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call 01277 525 020 or email a schedule or drawings.
Read more
Nearby places to Ickham
Also in Ickham
What the job involves on each surface
Coping and flashing joints
Not every coping or flashing leak is a sealant problem. We tell you if the fix is a roofing or metalwork job rather than a reseal.
Cladding panel joints
On sealed panel systems, every joint keeps water out. Failed runs are cut out and rebuilt end to end to the correct depth.
Sites and facades in and around Ickham
Ickham is in the South East, one of the UK’s drier regions. Even so, frost and condensation on steel and glass are common on winter mornings, so the external programme keeps a little slack. Ickham is about 57 miles from central London. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme.
Extensions at sites like St Martins Hospital (to the west of Ickham) normally sit beside working departments, and the mastic follows strict access rules. Building work at universities like Canterbury Christ Church University (to the west of Ickham) is often timed for the summer, mastic included.
Ickham is about 4 miles east of Canterbury, in Kent. Looking for facade sealing in Ickham? We can help. Ickham is one of 931 places in Kent on our list. There’s a separate page for London, roughly 57 miles from Ickham.
We cover the CT3 postcode districts for facade joints. For a building on The Street, School Lane and Baye Lane or nearby, send details and we’ll quote for facade joints. We also cover Wickhambreaux (1 mile north), Seaton (1 mile north-east), Littlebourne (1 mile west), Bramling (1 mile south-east) and Bekesbourne (2 miles south-west) for facade joints. A short drive away, we cover Canterbury (4 miles west), Margate (11 miles north-east), Dover (11 miles south-east), Folkestone (13 miles south), Ramsgate (11 miles north-east) and Broadstairs (12 miles north-east).
Local landmarks in Ickham
We work on buildings around The Rose Inn, among other places. The nearest railway station is Bekesbourne station, about 2.3 miles south-west of the centre. Nearby you will also find Canterbury Castle (4.7 miles west) and St Martins Hospital (3.3 miles west).
Do you need facade sealing in Ickham?
Sometimes the substrate is the problem: crumbling render, spalling concrete or flaking paint take the sealant with them. We tell you when the edges need repairing before resealing.
If one of these sounds familiar, it’s time for a closer look:
- Cold air coming in at window perimeters
- Previous reseals run over old sealant
- Weathered facade joints that have lost their grip
- Weathered joints at frame-to-structure perimeters
New units and refits on sites such as Wingham Industrial Estate, 1.7 miles to the south-east of Ickham, need their panel and perimeter joints sealed to the specification.
Before you book anyone
- The named product and why it was chosen
- How the existing material will be dealt with
- Health and safety accreditation such as CHAS
- Their public liability cover
Questions we are asked in Ickham
Is a hospital such as St Martins Hospital somewhere you can work?
Yes, healthcare and care buildings are part of our work. Work is phased so departments keep running, under the site’s own rules.
Do you cover business parks and estates near Ickham, such as Wingham Industrial Estate?
Yes, sites like Wingham Industrial Estate are within our area, along with the rest of Ickham. Send details of the unit and the work through our quote form for a quick quote.
Do you hold CHAS accreditation?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Do you install glazing systems?
No. Glazing, windows and glass replacement aren’t part of our work. We seal the joints around them, such as perimeter joints where frames meet the structure.
What will the job cost?
There isn’t a price list, because every site is different. With photos or drawings, we can give you a fixed quote.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
How do I request a quote?
There are four steps: send details, get a quote, we seal, guaranteed. The first step only needs photographs and a postcode.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
Some joints are best left to specialists: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
Quoting for work in Ickham
Quotes vary with the job. It mainly depends on:
- Site requirements such as inductions and permits
- Backing rod, priming and other preparation
- Whether the work must be split into stages
- Access and working height
Every site prices differently: the joint sizes, the specified product, access and working hours each have a bearing. Send the details and a fixed figure follows.
Before you send an enquiry
Diagnosis starts before we arrive. Let us know:
- Approximate linear metres or a joint schedule
- Any dates the work must fit around
- The product your specification calls for
- Whether an asbestos survey exists
To get a fixed quote, speak to us on 01277 525 020 or send details through our quote form. You can also send details through our quote form.