Facade Sealing in Weavering
Work needed on a facade joint in Weavering? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Damp patches beside frames after rain
- Old perimeter mastic that has dried out
- Staining on stone next to old sealant
Need facade sealing in Weavering?
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facades, frames and programmes in Weavering
There are a number of hotels within about 2 miles of Weavering. Hotel schemes tend to have fixed reopening dates, so the mastic is programmed tightly with the other trades. Weavering sits in one of the drier corners of the country, the South East. Even so, frost and condensation on steel and glass are common on winter mornings, which is why external dates are agreed with the site manager.
When units on a site such as Viewpoint Industrial Estate (to the north-west of Weavering) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package. For a contractor at a hotel such as Tudor Park Hotel, 1.3 miles east of Weavering, the mastic often has to be finished before a reopening date.
Weavering is about 1 mile east of Maidstone, in Kent. Any commercial site in Weavering is covered, for single jobs and planned programmes alike. Weavering is one of 931 places in Kent on our list for facade joints. There’s a separate page for London, about 32 miles away.
Work on facade joints is covered throughout ME14 and ME15, whatever the building. Among the streets we cover are Ames Avenue, Birkdale Lane and Fauchon's Lane. Close to Weavering, our area also takes in Bearsted (1 mile east), Grove Green (1 mile north-west), Penenden Heath (1 mile north-west), Foley Park (1 mile north-west) and Shepway (1 mile south-west). Nearby towns on our patch include Sittingbourne (9 miles north-east), Gravesend (13 miles north-west), Tonbridge (13 miles south-west), Faversham (14 miles east), Northfleet (14 miles north-west) and Minster (15 miles north-east).
Around Weavering
We work on buildings around Vinters Valley Park, Valley Park School and Bell Inn, among other places. For rail, the closest station is Bearsted station, roughly 0.8 miles east of the centre. Well-known places in the area include Maidstone Carriage Museum (1.6 miles west) and The Mall Maidstone (1.4 miles west). Not far away are Detling Hill.
About our facade sealing in Weavering
External sealing depends on the weather more than most trades. The sealant needs a dry joint and temperatures inside the maker’s limits, so frosty or damp mornings can hold work back. We build that into the programme and tell you if the forecast changes the plan. Most enquiries involve cold air coming in at window perimeters and discoloured or dirty facade joints, on shopfront frames, coping and flashing joints and perimeter joints where frames meet the structure. Whoever orders the work in Weavering, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
On a small site around Weavering, the mastic is best done in the fewest visits we can manage. Tell us when scaffold comes down and when decoration finishes, and we’ll plan around those stages.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Place
- Weavering (ME14, ME15)
- Wider area
- Kent
- Guarantee
- A 12-month guarantee
- Quote
- A fixed quote before we start
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
How a job runs
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. The work itself typically takes anything from a single day to several weeks, depending on joint lengths, access and the weather, and we clear our waste as we work. Several jobs near Weavering can be grouped on one trip. Tell us your site hours and we will plan around them.
- First we review photos, drawings or what we saw on a visit, and agree how each joint will be reached.
- Failed sealant is cut out along its full length.
- Both faces are cleaned and, where the product needs it, primed.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- The completed runs are checked with you, then the 12-month guarantee applies.
Before we start on site
- Confirm the product named in the specification
- Send asbestos survey details if the building is pre-2000
- Tell us which areas need to stay in use
Quotes
To get a fixed quote, call the office on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. You can also send details through our quote form.
Read more
Also near Weavering
What else we do in Weavering
Surface by surface
Window and door perimeters
Frame-to-wall joints at windows and doors are the facade joints we reseal most. A low-modulus neutral-cure product, chosen for the frame and wall, goes in finished to throw water off the joint.
Coping and flashing joints
Where the specification calls for sealant at copings or flashings, we can seal them. They sit in the most exposed positions on the building and need a durable external sealant.
What we are called out for in Weavering
New sealant run over old sealant rarely holds. Cured silicone won’t accept a new silicone bead, and the patch soon lifts.
Any of the following is a good reason to get the joints checked over:
- Weathered facade joints that have lost their grip
- Cladding panel joints that have opened up
- New sealant peeling off old mastic
- Water coming in around window frames
On a campus such as University for the Creative Arts, 2.6 miles west of Weavering, new teaching buildings and residences are normally built and refurbished around the academic year.
Before you book anyone
- The named product and why it was chosen
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Will failed sealant be removed rather than covered?
- How long is the guarantee, and what does it include?
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients book us directly too. The work is planned around how the building runs, so the building keeps working while we do.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.
Quoting for work in Weavering
To price the job, we consider:
- The size and state of each joint
- Distance, for remote addresses
- The total length or number of joints
- The site’s rules and procedures
Small jobs and large programmes are priced from the same things: what’s in scope, how we reach it, what’s specified and when it needs doing. Call for a quote, and you will have a fixed figure to work with.
What we need to price the job
Good information means a firmer quote. When you get in touch, include:
- Specification clauses that apply
- Drawings or a marked-up plan, if available
- Access details, including height
- Where the site is, with the postcode
Photos, drawings or a schedule of the joints and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Questions we are asked in Weavering
Is Weavering too small for you to travel to?
Not at all. Weavering is within our area. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Can you work at a site such as Viewpoint Industrial Estate, by Weavering?
Yes. Estates, retail parks and business parks around Weavering, Viewpoint Industrial Estate among them, are all within reach. A few photographs and the unit address let us price the work.
How many days will you need on site?
The duration is planned around your programme and the access we’re given. We’ll give you an estimate of time on site when we quote.
What’s the quickest route to a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
Can the sealant be colour-matched?
Often, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Do we need an asbestos check before resealing?
It’s worth checking in any building from before 2000. The dutyholder holds the asbestos register, so ask for it before we start. If asbestos is suspected, work stops until it is tested.
Are you CHAS accredited and on Constructionline?
Yes. Mastic Doctor is CHAS accredited and a Constructionline member.
When it isn’t the sealant
Not every problem is a sealant problem, and we’d rather tell you before you spend money. These need a different solution:
- Damaged frames that need replacing
- Installing or repairing glazing systems
- Arranging specialist high-level access, which is planned with the client
If in doubt, call 01277 525 020 or email us and we’ll say what we think before you book.
Surfaces we seal
- Window and door perimeters
- Cladding panel joints
- Coping and flashing joints
- Perimeter joints where frames meet the structure
- Shopfront frames
- Stone and brick facade joints