Facade Sealing in Upper Enham
Need facade sealing in Upper Enham? It’s simple: send details, get a quote, we seal, guaranteed.
- Cladding panel joints that have opened up
- Leaks at window and door perimeters
- New sealant peeling off old mastic
Facade sealing for Upper Enham sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Upper Enham: questions and answers
Can work at a site such as Andover College fit around teaching?
Yes. We plan campus work around teaching, exams and residence turnarounds. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Is Upper Enham too small for you to travel to?
Not at all. Upper Enham is within our area. We cover Greater London and the counties of the South East. Where we can, we group nearby jobs to make the most of each trip.
Do your applicators hold CSCS cards?
Yes. If you need card details for site access, let us know and we will send them with the quote.
What will the job cost?
It depends on the job: quantities, access, the product and any phasing. Call for a quote and we’ll price it properly.
Can one quote cover more than one building?
Yes. We take on portfolio and planned maintenance work, with each site phased to suit its occupants.
How long does a job like this take?
That varies with the scale of the job, but the work normally takes anything from a single day to several weeks, depending on joint lengths, access and the weather. Larger or phased jobs take longer, and we’ll give you a timescale with the quote.
Can you find out why a window is leaking?
Yes. We check the sealant joints and report what we find. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.
Facade sealing in Upper Enham, done properly
We don’t install glazing systems or replace glass. What we seal are the joints around them: perimeter joints where frames meet the structure, panel joints and window perimeters, using sealants classified for facade or glazing use. We work on window and door perimeters, stone and brick facade joints and coping and flashing joints, and the usual reasons a site gets in touch are cladding panel joints that have opened up and unsightly perimeter sealant on a visible elevation. A single leaking joint is often how a building in Upper Enham first comes to us: we look at the rest while we’re there and tell you what we find.
Sites around smaller places like Upper Enham can be a fair drive from suppliers, so we come with everything the package needs. Drawings, photos and the programme let us give a fixed quote.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, call 01277 525 020 or email us and we’ll arrange a return visit.
- Where
- Upper Enham (SP11)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
For managing agents and facilities managers
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so guests, pupils, patients or staff are disturbed as little as possible.
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
Also near Upper Enham
Other services in Upper Enham
Cost factors for facade joints
We price every job individually. The main factors are:
- Access and working height
- How much there is to seal
- Backing rod, priming and other preparation
- Distance, for remote addresses
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Before you send an enquiry
A few photographs plus some basic facts will normally do. It helps to include:
- When you need the work done
- Access details, including height
- Rough lengths or quantities, or drawings if you have them
- Clear photos of the problem areas
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price the work to it. For smaller jobs, photographs and a description will do.
Common problems we fix in Upper Enham
Sometimes the substrate is the problem: if the edge of the render, concrete or coating breaks away, the bead goes with it. We tell you when the edges need repairing before resealing.
These are often picked up first by site or facilities staff:
- Perimeter sealant that has split or peeled away
- Draughts around frames and panels
- Old perimeter mastic that has dried out
- Failed seals around shopfront and entrance frames
On a healthcare site such as Andover Hospital (Grounds), 2.6 miles to the south-west of Upper Enham, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
Before you book anyone
- What level of public liability insurance do they hold?
- How joint depth will be controlled
- How long is the guarantee, and what does it include?
- Whether their applicators hold CSCS cards
Mastic packages on Upper Enham sites
Upper Enham is about 62 miles from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, so mastic packages have to keep pace with busy programmes. Upper Enham is in the South East, one of the UK’s drier regions. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so external mastic is timed for workable conditions and agreed with the site manager.
Further education sites such as Andover College, 2.7 miles south of Upper Enham, are extended and refurbished from time to time, with mastic often programmed into the summer break. For contractors at a school such as Smannell and Enham Church of England (Aided) Primary School, sealing has to be finished before term starts.
Upper Enham is about 3 miles north of Andover, in Hampshire. We cover commercial sites throughout Upper Enham, whether it’s a single job or part of a planned programme. We work across 723 places in Hampshire. For work in that direction, see our Southampton page (23 miles or so).
We cover the SP11 postcode districts. We cover commercial and managed buildings on Dunhills Lane, Maccallum Road and Green Drove. Just outside Upper Enham, we also work in Enham Alamein (1 mile south), Little London (1 mile east), Smannell (1 mile south-east), Wildhern (1 mile north-west) and Knights Enham (1 mile south). Nearby towns on our patch include Winchester (15 miles south-east), Andover (3 miles south), Hyde (14 miles south-east), Tidworth (8 miles west), Weeke (14 miles south-east) and Kempshott (14 miles east).
Landmarks near Upper Enham
We work on buildings around The Hare & Hounds pub and the streets around them. For rail, the closest station is Andover station, about 2.8 miles south. Other landmarks nearby include Finkley Down Farm Museum (2.1 miles south) and Andover War Memorial Hospital (2.6 miles south-west). Green spaces nearby include Anton Lakes and Mill Lake.
What sealant work can’t fix
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is any of the following:
- Damaged frames that need replacing
- Leaks from roofs, gutters or failed flashings rather than sealant joints
- Providing access systems for the work
Not sure which it is? You can ring 01277 525 020 or email us and we will tell you honestly.
Surfaces we seal
- Window and door perimeters
- Perimeter joints where frames meet the structure
- Cladding panel joints
- Stone and brick facade joints
- Coping and flashing joints
- Shopfront frames
Should maintenance staff do it?
Paperwork matters too. Many sites expect CSCS cards, RAMS and proof of insurance, and we’ll confirm the paperwork you need with the quote.
Redoing a failed joint normally costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
From enquiry to sign-off
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Jobs in and around smaller places like Upper Enham are normally planned as a single visit, so photos and measurements up front really help. Then the right materials arrive with us.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
What we need from you
- Tell us your opening times and when work is allowed
- Move anything stored against the joints
- Send asbestos survey details if the building is pre-2000
Ask for a quote
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.