Tong facade sealing
Work needed on a facade joint in Tong? We assess it, carry out the work and guarantee our workmanship for 12 months.
- Weathered joints at frame-to-structure perimeters
- Perimeter sealant that has split or peeled away
- Previous reseals run over old sealant
Facade sealing for businesses in Tong
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
New build and refits around Tong
With the shore within about 1 mile, Tong counts as a coastal location. Coastal exposure means perimeter and cladding joints work harder than on an inland job, and the sealant, primer and backing need choosing with that in mind. Being on an island, Tong means planning around ferry times as well as the weather. Everything for the package travels with us, so drawings and quantities matter.
For a contractor working at a hospital such as Western Isles Hospital (2.3 miles south-west of Tong), perimeter and facade sealing is planned around patients and deliveries.
Tong (Gaelic: Tunga) is in Na h-Eileanan Siar. Anywhere in HS2, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Across Na h-Eileanan Siar, 87 places are covered, including Tong.
Postcode districts covered here: HS2 for facade joints. If your site is on Milkinghill Park and Barraid Mhicille Mhoire or close by, we can quote for facade joints. Nearby places we also cover include Aird Tong (1 mile east), Upper Coll (1 mile north-east), Newmarket (2 miles south-west), Steinis (2 miles south) and Laxdale (2 miles south-west) for facade joints. Remote and island addresses take more planning, from travel and ferries to the weather, so give the site location in your enquiry.
Around Tong
Other landmarks nearby include Lewis Loom Centre (2.9 miles south-west) and Western Isles Hospital (2.3 miles south-west). Green spaces nearby include Loch Àirigh na Lic.
Facade sealing for commercial buildings in Tong
Access is part of every facade job, and we plan it with you before quoting. Tell us about access: whether scaffold is already up, what the client is arranging, and any restrictions on the site, so the price covers the real job. The enquiries we see most involve failed sealant on precast panel joints and cold air coming in at window perimeters, on perimeter joints where frames meet the structure, window and door perimeters and coping and flashing joints. For commercial sealant work in Tong, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
Outside mastic in Scotland needs a dry, frost-clear joint, and in a place like Tong that means watching the forecast. We build some give into the plan and agree it with the site manager.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Where
- Tong (HS2)
- Wider area
- Na h-Eileanan Siar
- Guarantee
- A 12-month guarantee
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Updated
- 3 November 2026
When something else is needed
Honesty saves time and money. New sealant won’t cure:
- Joints whose design needs changing by the specifier
- Work on the window or framing system itself
- Cracked or spalling substrates that need repair before sealing
If in doubt, give us a call on 01277 525 020 or email drawings and photos and we’ll say what we think before you book.
Surfaces we seal
- Cladding panel joints
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Coping and flashing joints
- Shopfront frames
- Window and door perimeters
Common problems we fix in Tong
Adhesive failure, where the sealant peels away from one face, normally comes from poor preparation. Contamination, moisture or skipping the primer the maker specifies leave a weak bond.
Look out for the following:
- Draughts around frames and panels
- Unsightly perimeter sealant on a visible elevation
- Water coming in around window frames
- Previous reseals run over old sealant
Units on estates such as Gleann Seileach Business Park, 2.8 miles south-west of Tong, tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal.
Questions to ask before you book
- Whether old or failed sealant will be cut out, not overlaid
- Do they follow the manufacturer’s priming guidance?
- How they’ll work around occupants
- How they handle RAMS and site documents
From enquiry to sign-off
Before any cutting starts, the area is protected: masking tape along the joint edges and sheeting over anything nearby. On site, the work usually takes longer on a full elevation than on a handful of window perimeters, and it always depends on dry weather, and our waste is bagged and taken away as we go. For work around Tong, we aim for one trip, which is why we ask for photos and a full list first. External joints need a dry spell as well.
- Access, site rules and timing are settled with the client up front.
- Weather and temperature are checked against the product’s limits.
- Each joint is cut out and the edges inspected.
- Joints are cleaned, primed if required and fitted with backing rod.
- Facade-grade sealant goes in and is tooled to a tidy concave profile.
- We hand over with our 12-month workmanship guarantee.
Getting the site ready
- Share the asbestos register for older buildings
- Flag any permit to work we’ll need
- Point out any areas we must not close
Ask for a quote
Tell us about the building, the joints and when you need the work done, and we will put a fixed quote together. The easiest way is to call the office on 01277 525 020 or email drawings and photos.
Read more
Questions about Tong
Our building in Tong is near the coast: does that change the sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Will you take on work at estates like Gleann Seileach Business Park, close to Tong?
Yes. Our area takes in Tong and its surroundings, with estates and business parks such as Gleann Seileach Business Park included. Send details of the unit and the work through our quote form for a quick quote.
Do you take on small jobs?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Does weather matter for sealant work?
It can, when the joints are outside. Sealant won’t bond properly to a wet or frosty joint, so we watch the forecast and rearrange outside work if we have to. Indoors, the weather is rarely a problem.
Can you work on upper floors?
Access is planned with you before we quote. Tell us about access: existing scaffold, what you’re arranging and any site restrictions, and we’ll price the work around it.
Will you check whether the sealant is causing the leak?
Yes. We look at the perimeter sealant and tell you whether it has failed before quoting. Where the cause seems to be elsewhere, we’d rather tell you than reseal pointlessly.
How the job changes by surface
Coping and flashing joints
Not every coping or flashing leak is a sealant problem. Where the issue isn’t the sealant, we say so.
Brick and stone facades
Stone can absorb plasticisers from the wrong sealant. We use a product suitable for the stone where the specification names one, and mask the edges carefully.
Aftercare for building managers
Regular inspection catches problems early. Specifically:
- Combine resealing with other works that need access
- Report water ingress at frames as soon as it shows
- Brief window cleaners about newly sealed joints
- Record the product and colour used on each elevation
Record the sealant type and date on the building file. Future work can then match the product and colour without guesswork.
Check older buildings for asbestos before disturbing old mastic. Older sealants can contain asbestos.
Places near Tong
More services for Tong
Should maintenance staff do it?
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.