Facade Sealing in The Moor
Looking for facade sealing in The Moor? It’s simple: send details, get a quote, we seal, guaranteed.
- Draughts around frames and panels
- Weathered joints at frame-to-structure perimeters
- Gaps between rainscreen or cladding panels
Facade sealing near The Moor
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our facade sealing in The Moor
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We cut out failed facade joints and reseal them with a facade-grade sealant suited to the movement. If you are dealing with patch repairs that keep failing and old perimeter mastic that has dried out, we can put it right. One point of contact handles commercial sealant work in The Moor from the first photographs to the final walk-round, for single jobs and planned programmes alike.
For a site near The Moor, the mastic visit is planned so the right sealants, primers and backing rod are on hand. Drawings, photos and the programme let us give a fixed quote.
Every job we finish is backed by a 12-month workmanship guarantee, in The Moor as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Where
- The Moor (TN18)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
When something else is needed
Being straight saves everyone time. Fresh joints won’t solve:
- Specialist high-level access methods
- Leaks from roofs, gutters or failed flashings rather than sealant joints
- Movement beyond what any sealant can handle
If you’re not sure, just speak to us on 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Shopfront frames
- Cladding panel joints
- Coping and flashing joints
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
FAQs: The Moor
Can you work at a site such as Hawkhurst Station Business Park, by The Moor?
Yes. Our area takes in The Moor and its surroundings, with estates and business parks such as Hawkhurst Station Business Park included. A few photos and the unit address let us price the work.
Can you work on a hospital site such as Hawkhurst Community Hospital?
Yes, provided the work is planned with the site’s estates team. Each area is agreed with the ward or department and the estates team in advance.
Do you have public liability insurance?
Yes. Our insurance certificate can be sent alongside the quote.
Do you run new sealant over the existing bead?
No. Fresh silicone won’t grip cured silicone, so the existing bead is removed entirely and the joint cleaned back to sound material. That is what makes the new joint last.
Can you quote from photos?
Many jobs can be quoted from photographs, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.
How long will the new sealant last?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Are you CHAS accredited and on Constructionline?
Yes. CHAS accredited, Constructionline member, and our applicators hold CSCS cards.
What happens if it’s left?
Failed joints let in more than water: draughts around frames add to heating costs and complaints. Resealing deals with the draught as well as the leak. Halls, stores and units around places like The Moor may not be checked every day, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
The price depends on how many linear metres there are, how much old material needs removing and how the joints are reached. Call for a quote when you are ready.
Why choose Mastic Doctor in The Moor
- Work to your specification and the manufacturer’s guidance
- A fixed quote before work starts
- Matching to RAL references, product permitting
- Joints cleaned back to sound surfaces
Read our cost guide and how we’re accredited.
Contractors’ notes for The Moor
The Moor lies roughly 41 miles out from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, so mastic packages have to keep pace with busy programmes. The Moor sits in one of the drier corners of the country, the South East. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so we time external mastic for dry faces and agree it with the site team.
Recladding or extending a unit at a site like Hawkhurst Station Business Park (1.7 miles north of The Moor) brings panel joints and frame perimeters into the programme. With historic properties like Great Dixter, 4.8 miles to the south-east of The Moor, in the area, refurbishment work often meets old masonry that needs compatible sealants. Hotels like The Eight Bells Hotel, under half a mile south of The Moor, rarely close for long, so refurbishment mastic is phased floor by floor.
The Moor is about 12 miles north of Hastings, in Kent. We cover The Moor, with the same fixed quotes and 12-month guarantee as everywhere else. Our Kent coverage takes in 931 places, large and small. We also cover Brighton, around 31 miles from The Moor.
Commercial sites across TN18 are covered. We cover commercial and managed buildings on The Moor, Pipers Lane and The Chestnuts. If your building is just outside The Moor, we cover Hawkhurst (1 mile north-east), Little Conghurst (1 mile east), Pipsden (1 mile north-east), Four Throws (1 mile east) and Beal's Green (1 mile north). Further afield, our area takes in Royal Tunbridge Wells (12 miles north-west), Tonbridge (15 miles north-west), Paddock Wood (11 miles north-west), Tenterden (8 miles east), Southborough (13 miles north-west) and Park Wood (14 miles north).
Near you in The Moor
We work on buildings around Collingwood Nature Reserve, The Eight Bells Hotel and Hawkhurst Church of England Primary School, among other places. The closest station to The Moor is Etchingham station, about 3.3 miles south-west of the centre. Well-known places in the area include Ticehurst House Hospital (4.6 miles west).
After the work
Sealant joints are maintenance items, and their life depends on movement, exposure, cleaning and use. Our advice:
- Plan facade sealing alongside redecoration
- Clear debris that holds water against joints
- Brief window cleaners about newly sealed joints
- Check the asbestos register before old mastic is disturbed
Let the new sealant cure before washing the facade or windows near it. Keep high-pressure jets and strong chemicals away from new sealant and tell your cleaning contractor.
Check older buildings for asbestos before disturbing old mastic. Older sealants can contain asbestos, and if it’s suspected, we stop until it has been tested.
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Agents, factors and owners’ representatives all follow the same route: send details, get a fixed quote, we seal, guaranteed. We can agree access arrangements and keyholder contacts beforehand.
Towns and villages near The Moor
What else we do in The Moor
Surface by surface
Coping and flashing joints
Not every coping or flashing leak is a sealant problem. Where the issue isn’t the sealant, we say so.
Render and coated surfaces
Sealant can only hold as well as the render or paint beneath it. Loose coatings are cleaned back first.
Our process
On arrival, we report to your site contact and complete whatever induction the building runs. Everything around the joints gets protected before any cutting starts, with the work itself usually taking a day or two for a few elevations, and longer where access has to be moved around the building. If others near The Moor need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- Photos, drawings or a visit tell us about the joints and the access.
- Product choice follows the joint’s movement and substrate.
- The existing bead comes out in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
What we need from you
- Confirm the product named in the specification
- Make sure the joints can be reached
- Share your working hours and any access restrictions
Get a fixed quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.