Facade Sealing in Temple Park
Facade joint and window perimeter sealing on commercial buildings in Temple Park and across Bracknell Forest. CHAS accredited, Constructionline member, with a 12-month guarantee on workmanship.
- Air leaks through failed facade joints
- Damp patches beside frames after rain
- Sealant pulling away from frames or panels
Need facade sealing in Temple Park?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Facade sealing in Temple Park
We don’t install glazing systems or replace glass. We handle the sealant joints that surround those elements: perimeter joints where frames meet the structure, panel joints and window perimeters. If you have leaks at window and door perimeters and hard, chalky sealant that no longer flexes, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Temple Park, preparation and product choice get the time they need.
On a small site around Temple Park, the mastic is best done in the fewest visits we can manage. Tell us when scaffold comes down and when decoration finishes, and we will plan around those stages.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we are upfront about that.
- Location
- Temple Park (RG42, RG12)
- Wider area
- Bracknell Forest
- Cover
- 12 months on our workmanship
- Quote
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Your questions answered
Does your area include sites such as Longshot Lane Industrial Estate, near Temple Park?
Yes. We cover Temple Park and the area around it, including industrial estates, business parks and retail parks such as Longshot Lane Industrial Estate. To start, just ring 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Could you schedule work at a campus like Newbold College of Higher Education for the vacation?
Yes. Education sites normally want the work in vacations or in phases during term, and we plan to suit. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
How soon can the area be used again?
The product and site conditions decide that. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
When is resealing likely to be due?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Do you take on multi-site work?
Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Which sealant do you use on facades?
Low-modulus, neutral-cure silicone suits many facade and perimeter joints. Hybrid or MS polymer, polyurethane and polysulphide sealants suit others, as the specification or substrate requires.
Do you guarantee your work?
Yes. The 12-month guarantee covers our preparation and application, though not damage or work by other trades.
Diagnose, treat, sign off
Working in a building that stays open takes some planning. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. Several jobs near Temple Park can be grouped on one trip. Mention the building’s opening times and we’ll work within them.
- Access, site rules and timing are settled with the client up front.
- We only seal when joints are dry and within the product’s temperature range.
- Each joint is cut out and the edges inspected.
- Joints are cleaned, primed if required and fitted with backing rod.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
What we need from you
- Confirm the product named in the specification
- Move anything stored against the joints
- Tell us your opening times and when work is allowed
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to speak to us on 01277 525 020 or email the details over with what you know.
Related advice
Surface by surface
Perimeter joints at frames and structure
These frame-to-structure joints take a lot of movement and weather. We cut them out, prepare both faces and reseal to the specification using a sealant classified for that use.
Render and coated surfaces
Where the joint will be painted over, a paintable hybrid or PU sealant may suit. We confirm the product with you before starting.
When something else is needed
A proper diagnosis includes knowing what sealant can’t do. You’ll hear from us if the cause turns out to be any of the following:
- Arranging specialist high-level access, which is planned with the client
- Work on the window or framing system itself
- Cracked or spalling substrates that need repair before sealing
If in doubt, call the office on 01277 525 020 or send details through our quote form and we will say what we think.
What we seal
- Cladding panel joints
- Coping and flashing joints
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Shopfront frames
- Window and door perimeters
Towns and villages near Temple Park
What else we do in Temple Park
Keeping the joints sound
Keep the joints in good shape with a few simple steps:
- Combine resealing with other works that need access
- Don’t wait for a second leak before calling
- Check that rainwater leaves the facade the way it was designed to
- Confirm the survey covers external sealants in older buildings
Anything drilled through a facade joint breaks the seal. Make sure the joint is resealed afterwards.
Don’t wait for a full elevation to fail. Small repairs stop small leaks becoming large ones inside the building.
What sets the cost
There’s no standard rate for sealant work, since sites vary so much. What we look at:
- Which sealant the job calls for
- Quantities, in metres or numbers
- How much existing material needs removing
- Induction, permit and paperwork requirements
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote, and you will have a fixed figure to work with.
Before you send an enquiry
It doesn’t need to be a full survey. A few details are enough to get going:
- When you need the work done
- What the building is and how it’s used
- Access details, including height
- Photos of the joints, close up and from further back
A good quote starts with a clear picture: what’s there, how much of it, how we reach it and what’s specified. Send what you have, and we will arrange a site visit if anything is unclear.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
New build and refits around Temple Park
Temple Park sits in one of the drier corners of the country, the South East. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, which is why external dates are agreed with the site manager. At about 30 miles from central London, Temple Park is within reach of the capital. Construction around the commuter belt mixes station-side flats with refurbished offices and units, and each scheme needs its mastic sealed to programme.
Hotel extensions and refits, at places such as Fines Bayliwick Hotel (0.6 miles south-west of Temple Park), normally run between busy periods, so the sealing is squeezed into short windows. For contractors at a school such as Meadow Vale Primary School, sealing has to be finished before term starts. New units and refits on sites such as Longshot Lane Industrial Estate (0.8 miles south of Temple Park) need their panel and perimeter joints sealed to the specification.
Temple Park is about 1 mile north-west of Bracknell, in Bracknell Forest. If you are looking for facade sealing in Temple Park, we can help, as we do across Bracknell Forest. Temple Park is one of 48 places we cover in Bracknell Forest for facade joints. We also cover Reading, some 9 miles away.
Work on facade joints is covered throughout RG42 and RG12. Streets here include Wood Lane, Park Lane and Jock's Lane, and sites on any of them can send details for a fixed quote. Nearby places we also cover include Priestwood (1 mile south-east), Binfield (1 mile west), Farley Wood (1 mile south-west), Popeswood (1 mile south-west) and Quelm Park (1 mile east) for facade joints. A short drive away, we cover Sandhurst (5 miles south), North Ascot (4 miles east), Forest Park (3 miles south-east), The Warren (3 miles south-east), College Town (6 miles south) and Little Sandhurst (5 miles south).
Around Temple Park
Around Temple Park, our work takes us to commercial buildings near Stag And Hounds Public House and Garth Hill College and the streets around them. The nearest railway station is Bracknell station, about 1.2 miles south-east of the centre. Nearby you will also find Pinewood Hospital (2.9 miles south) and The Lexicon (1.1 miles south-east). Not far away are Heath Lake and Holt Copse & Joel Park.