Facade Sealing in Send Marsh
We carry out facade joint and window perimeter sealing on commercial buildings in Send Marsh and the surrounding area. Send photographs or drawings for a fixed quote.
- Air leaks through failed facade joints
- Previous reseals run over old sealant
- Discoloured or dirty facade joints
Facade sealing for Send Marsh sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our facade sealing in Send Marsh
We are often asked to look at water coming in around frames. Failed perimeter sealant is a frequent cause, though that isn’t the only cause. If the evidence points away from the sealant, we say so before quoting. We work on shopfront frames, window and door perimeters and coping and flashing joints, and the failures we’re asked to look at most are perimeter joints where frames meet the structure and staining on stone next to old sealant. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Send Marsh, that means joint design, primers and backing rod as standard.
Conversions of older rural buildings near smaller places such as Send Marsh bring stone, flint, brick and timber up against new glazing. Those joints need a sealant that suits an uneven, sometimes porous surface, and often a colour chosen for the building.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Place
- Send Marsh (GU23)
- Region
- Surrey
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
From enquiry to sign-off
Occupied buildings need a little choreography. We sign and contain the area we are in, keep walkways clear and move on in phases so staff and visitors can carry on around us. Rural sites near Send Marsh may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- First we review photos, drawings or what we saw on a visit, and agree how each joint will be reached.
- Failed sealant is cut out along its full length.
- Both faces are cleaned and, where the product needs it, primed.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- The completed runs are checked with you, then the 12-month guarantee applies.
Before we start on site
- Send your site hours and access windows
- Send any specification or drawings in advance
- Send asbestos survey details if the building is pre-2000
Get a fixed quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. Where a site visit makes more sense, we will arrange one.
Related advice
Building and refurbishing in Send Marsh
Send Marsh is about 23 miles from central London. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme. The South East is one of the drier parts of the UK. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, which is why external dates are agreed with the site manager.
New wings at hospitals like Woking Community Hospital, 2.6 miles north-west of Send Marsh, bring long runs of window and panel joints to seal. When a school such as Send CofE Primary School is extended or refurbished, the mastic package is often squeezed into the holidays.
Send Marsh is about 3 miles south-east of Woking, in Surrey. Commercial clients in Send Marsh can call on us for facade joints. Our Surrey coverage takes in 379 places, from busy centres to rural villages. Sites around London have their own page, about 23 miles away.
We take on facade joints across the GU23 postcode area, for business premises of every kind. Buildings on Send Marsh Road, Tuckey Grove and Stringhams Copse are within our area. Send Marsh sits on or close to the B368, which helps when planning parking and deliveries for the job. If your building is just outside Send Marsh, we cover Burntcommon (1 mile south), Send (1 mile west), West Clandon (2 miles south), Sutton Green (2 miles west) and Mayford (2 miles west). Nearby towns on our patch include Guildford (4 miles south-west), Woking (3 miles north-west), Camberley (10 miles west), Epsom (11 miles east), Redhill (15 miles east) and Farnham (13 miles south-west).
Around Send Marsh
In Send Marsh, that means premises near The Jovial Sailor pub, St John the Baptist Catholic Comprehensive School and Ripley Court School and the streets around them. The nearest railway station is Clandon station, about 1.8 miles south. A little further out are Send and Ripley History Society Museum (1 mile north-east) and Guildford Castle (4.7 miles south-west). Green spaces nearby include Boldermere Lake and St Martha's Hill.
Also near Send Marsh
Other services in Send Marsh
Building owners, agents and FMs in Send Marsh
FMs need a contractor who is easy to get on site. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
Blocks and communal areas make up much of the work for housing associations and agents. We phase the work so people keep access, and each stage is agreed with your contact.
What we can’t put right
Honesty saves time and money. Fresh joints won’t solve:
- Damp caused by condensation inside the building
- Cracked or spalling substrates that need repair before sealing
- Replacing glass or failed glazing units
Not sure which it is? You can ring 01277 525 020 or use the quote form and we’ll tell you honestly before you book.
Where we work in Send Marsh
- Cladding panel joints
- Coping and flashing joints
- Stone and brick facade joints
- Window and door perimeters
- Shopfront frames
- Perimeter joints where frames meet the structure
FAQs: Send Marsh
Can you work at a site such as Merrow Business Park, by Send Marsh?
Yes. Our area takes in Send Marsh and its surroundings, with estates and business parks such as Merrow Business Park included. Send details of the unit and the work through our quote form for a quick quote.
Can work at a site such as University of Surrey - Stag Hill Campus fit around teaching?
Yes. Tell us the term dates, vacation periods and access windows, and we’ll plan the work around them. Any paperwork you need, from RAMS to our insurance certificate and CSCS details, is confirmed with the quote.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
Can you fit around our working hours?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Do you seal facades in winter?
We can work through the year, but sealant needs a dry joint and temperatures within the product’s range. Cold, damp mornings can delay a start, and we build that into the programme.
Do you provide access for facade work?
That varies with the building and the access on offer. Share what access exists or is planned when you send details, and we will agree the approach together.
What type of sealant goes on window perimeters?
Low-modulus, neutral-cure silicone suits many facade and perimeter joints. Some joints call for hybrid, PU or polysulphide instead, as the specification or substrate requires.
Different surfaces, different methods
Brick and stone facades
Stone can absorb plasticisers from the wrong sealant. We use a product suitable for the stone where the specification names one.
Precast concrete panels
Precast arrises sometimes crumble or carry old residue. We clean back to sound material and flag edges that need repair first.
When to call us in Send Marsh
Not every failure is in the sealant: crumbling render, spalling concrete or flaking paint take the sealant with them. We tell you when the edges need repairing before resealing.
What tends to prompt an enquiry:
- Perimeter sealant that has split or peeled away
- Unsightly perimeter sealant on a visible elevation
- Leaks at window and door perimeters
- Cold air coming in at window perimeters
Units on estates such as Merrow Business Park (to the south of Send Marsh) tend to be reclad and refitted as tenants change, and each job leaves cladding and perimeter joints to seal.
What to look for in a quote
- How long is the guarantee, and what does it include?
- Their public liability cover
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- How they handle RAMS and site documents
What happens if it’s left?
Each spell of rain drives water past a failed facade joint. The damage builds out of sight: wet linings, rusting fixings, staining and spoiled finishes. Resealing now costs less than repairing interiors later. For buildings around smaller places like Send Marsh, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
The product called for affects the cost, and so does the preparation. Access, phasing and site rules also count.
Why clients in Send Marsh choose us
- Matching to RAL references, product permitting
- One contact handling all your sites
- A fixed quote before work starts
- Workmanship guaranteed for 12 months
See how commercial sealant jobs are priced and our accreditations and insurance.