Facade and window perimeter sealing in Ratling, Kent
Facade sealing for Ratling, from a contractor working since 2005. Fully insured and CHAS accredited.
- Perimeter joints where frames meet the structure
- Discoloured or dirty facade joints
- Water coming in around window frames
Facade sealing for businesses in Ratling
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Facade sealing for commercial buildings in Ratling
We seal window and door perimeters, cladding panel joints, external facade joints and perimeter joints where frames meet the structure for clients around Ratling. Where sealant is the specified fix, we also take on coping and flashing joints. We work on perimeter joints where frames meet the structure, shopfront frames and stone and brick facade joints, and what we’re called in for most is failed seals around shopfront and entrance frames and staining on stone next to old sealant. For commercial sealant work in Ratling, you deal with one contact from quote to sign-off, whether it’s one building or several.
Construction in and around smaller places such as Ratling is often barn conversions, small groups of houses or extensions to halls and schools. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
What our 12-month guarantee covers is the way we did the job: the preparation, the sealing and the tooling. Damage, later alterations by others and movement beyond what the joint was designed for sit outside it.
- Location
- Ratling (CT3)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Page updated
- 3 November 2026
FAQs: Ratling
Is Aylesham Industrial Estate, near Ratling, within your area?
Yes, sites like Aylesham Industrial Estate are within our area, along with the rest of Ratling. Photos and a short description are enough for a first look.
Is Ratling off your patch?
Not at all. Ratling is within our area. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Are you CHAS accredited?
Yes. We’re CHAS accredited and a Constructionline member, which helps with supplier vetting.
How long does a typical visit take?
The duration is planned around your programme and the access we are given. You’ll have an expected duration with the quote.
Is your workmanship covered by a guarantee?
Yes. Our workmanship is backed for 12 months.
Is old mastic on our building likely to contain asbestos?
For older buildings, yes, check before work starts. The duty to manage asbestos sits with the dutyholder, so ask for it before we start. Suspect material is left alone until it has been tested.
Work for main contractors and building owners
Hospitality, education, healthcare, office and retail clients book us directly too. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
When you manage a building on behalf of an owner, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative, plus a 12-month guarantee.
Contractors’ notes for Ratling
Rainfall across the South East, Ratling included, is lower than in many parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, so the external programme keeps a little slack. Ratling is about 59 miles from central London. Construction around the commuter belt mixes station-side flats with refurbished offices and units, so mastic packages have to keep pace with busy programmes.
School extensions, at buildings such as St Joseph's Catholic Primary School, usually run to the summer holidays, mastic included. For contractors refurbishing units at places like Aylesham Industrial Estate (1.1 miles south-west of Ratling), the mastic covers cladding panels, roller-door and window perimeters. Hospital estates such as St Martins Hospital, 5.2 miles north-west of Ratling, tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.
Ratling is about 6 miles south-east of Canterbury, in Kent. Across the CT3 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Kent coverage takes in 931 places. London is covered too, around 59 miles from Ratling.
We cover the CT3 postcode districts. Nearby places we also cover include Nonington (1 mile south-east), Snowdown (1 mile south), Goodnestone (1 mile north-east), Chillenden (2 miles east) and Woolage Village (2 miles south) for facade joints. Further afield, our area takes in Canterbury (6 miles north-west), Margate (13 miles north-east), Dover (8 miles south-east), Folkestone (11 miles south), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Around Ratling
The closest station to Ratling is Adisham station, about 0.5 miles north-west. A little further out are St Martins Hospital (5.2 miles north-west).
Towns and villages near Ratling
Also in Ratling
Why deal with it now?
Topping up a failed joint usually buys very little time. A full cut-out and fresh bead is the repair that holds, so you aren’t paying for the same joint twice. Converted and older buildings near places like Ratling tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Pricing facade joints depends on quantities, condition and access, plus any specification you’re working to. Call for a quote.
What you get with us
- Public liability insurance in place
- Work carried out by CSCS-carded applicators
- One number for every site we cover
- Products installed to the manufacturer’s instructions
See how commercial sealant jobs are priced or our accreditations.
What the job involves on each surface
Precast concrete panels
Precast arrises sometimes crumble or carry old residue. We clean back to sound material and flag edges that need repair before sealing.
Brick and stone facades
Joints in natural stone need care to avoid staining. We use a product suitable for the stone where the specification names one.
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Note when each elevation was last resealed
- Avoid patch repairs on failed facade joints
- Report water ingress at frames as soon as it shows
- Avoid harsh cleaners on facade sealant
Let the new sealant cure before washing the facade or windows near it. Keep high-pressure jets and strong chemicals away from new sealant and tell your cleaning contractor.
Planned resealing is cheaper than reacting to leaks. Inspect regularly and reseal sections as they start to fail.
From enquiry to sign-off
At the end of each section, the masking comes off, the area is cleaned and every joint is checked. If an area should be left alone while the sealant cures, we say how long and put signs out. For work around Ratling, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- We start with photographs, drawings or a visit to see the joints and agree access.
- We confirm the joint type, movement and the specified product.
- Failed beads are removed in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Rod goes in to fix the depth, then the joint is sealed and tooled.
- We go over the completed work with you before leaving.
Before we start on site
- Send any specification or drawings in advance
- Let building users know which areas are affected
- Share the asbestos register for older buildings
Get a fixed quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or email drawings and photos.
Related advice
Cost factors for facade joints
The price varies from site to site. Expect it to depend on:
- How much there is to seal
- Specialist products, such as fire-rated or hygienic sealants
- Location, for remote and island sites
- Phasing around occupants
Access can matter as much as the joints themselves: easy-to-reach joints are quicker than those that need equipment to get to. Tell us how the joints are reached and call for a quote.
What we need to price the job
However big the job, these details speed things up:
- Asbestos survey details if the building is older
- The type of building and who uses it
- Approximate linear metres or a joint schedule
- The postcode of the building
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to ring 01277 525 020 or send photos by email with what you know.