Nonington facade sealing
Sealant work in Nonington for main contractors, managing agents and facilities managers: facade joint and window perimeter sealing on commercial buildings, with a fixed quote first.
- Staining on stone next to old sealant
- Cold air coming in at window perimeters
- Cladding panel joints that have opened up
Facade sealing for Nonington sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Questions about Nonington
Is Nonington too small for you to travel to?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Is Aylesham Industrial Estate, near Nonington, within your area?
Yes. Our area takes in Nonington and its surroundings, with estates and business parks such as Aylesham Industrial Estate included. A few photographs and the unit address let us price the work.
How much does the work cost?
Each job is quoted on its own details. To get one, phone 01277 525 020 or email drawings and photos.
Are you CHAS accredited?
Yes. We are CHAS accredited, we are a Constructionline member and we use CSCS-carded applicators.
Can you fit around our working hours?
We are in the office from 8am until 5pm, Monday to Friday. Let us know your site hours and access windows, and the work will be planned around them.
Can you follow the specification on our project?
Yes. Include it with the drawings when you ask for a quote, and we’ll price the work to it, flagging anything that needs clarifying.
Can you work on upper floors?
That comes down to the access arranged for the job. When you phone 01277 525 020 or email a schedule or drawings, describe the access, and we’ll plan the work with you.
About our facade sealing in Nonington
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. Once a perimeter seal fails, water tracks in around frames and panels. We remove failed sealant and install a new bead chosen for the joint and how far it moves. Site teams most often ask us about unsightly perimeter sealant on a visible elevation and weathered facade joints that have lost their grip, across shopfront frames, stone and brick facade joints and cladding panel joints. Most enquiries from Nonington start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
For a site near Nonington, the mastic visit is planned so the right sealants, primers and backing rod are on hand, timed to the stage the job has reached. Drawings, photos and the programme let us give a fixed quote.
Our workmanship is guaranteed for 12 months, in Nonington as everywhere else we work. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Nonington (CT15)
- Region
- Kent
- Cover
- 12 months on our workmanship
- Quotes
- A fixed quote before we start
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Facade sealing in Nonington: the local picture
Nonington is in the South East, one of the UK’s drier regions. Winter mornings still bring frost and condensation on frames and panels, so we time external mastic for dry faces and agree it with the site team. Nonington is about 60 miles from central London. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme.
With historic properties like Goodnestone Park (1.4 miles north of Nonington) in the area, refurbishment work often meets old masonry that needs compatible sealants. For contractors refurbishing units at places like Aylesham Industrial Estate, 1.5 miles west of Nonington, the mastic covers cladding panels, roller-door and window perimeters. School extensions, at buildings such as Nonington Church of England Primary School, typically run to the summer holidays, mastic included.
Nonington is about 7 miles north-west of Dover, in Kent. Across the CT15 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Kent coverage takes in 931 places, from busy centres to rural villages. For work in that direction, see our London page, about 60 miles away.
We cover the CT15 postcode districts for facade joints. For a building on Vicarage Lane, St Mary's Close and Park View Rise or nearby, send details and we will quote for facade joints. Close to Nonington, our area also takes in Snowdown (1 mile south-west), Frogham (1 mile south), Ratling (1 mile north-west), Chillenden (1 mile north-east) and Barfrestone (1 mile south-east). A short drive away, we cover Canterbury (7 miles north-west), Margate (13 miles north-east), Dover (7 miles south-east), Folkestone (10 miles south), Ramsgate (11 miles north-east) and Broadstairs (13 miles north-east).
Local landmarks in Nonington
Nonington’s nearest station is Aylesham station, about 0.8 miles west of the centre.
Towns and villages near Nonington
What else we do in Nonington
Surface by surface
Render and coated surfaces
Paintable sealants exist for joints that will be coated. The choice depends on the specification and finish.
Brick and stone facades
On masonry, the sealant has to suit a porous, textured surface. We avoid acetoxy silicone, which can stain some natural stone, and primers go on where specified.
After the work
For the best life from the joints:
- Brief window cleaners about newly sealed joints
- Record the product and colour used on each elevation
- Keep sills, gutters and drainage paths clear
- Never let anyone seal over old sealant
Let the new sealant cure before washing the facade or windows near it. Pressure washers and harsh cleaners can damage a fresh bead and tell your cleaning contractor.
Don’t wait for a full elevation to fail. Small repairs stop small leaks becoming large ones inside the building.
How a job runs
Our CSCS-carded applicators arrive with the sealants, primers and backing rod the job calls for. Joint faces are cleaned back to sound, dry surfaces, the manufacturer’s primer is applied where it’s called for, and the sealant is tooled off neatly. Jobs in and around smaller places like Nonington are usually planned as a single visit, so we ask for photos and rough sizes first. That way the right products come on the day.
- First we review photos, drawings or what we saw on a visit, and agree how each joint will be reached.
- The old bead is cut away completely, not overlaid.
- Joint faces are cleaned to firm, sound material, with primer where the sealant maker specifies it.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- The new sealant goes in and is tooled firmly onto both faces.
- We walk the finished joints with you before handing over.
Preparing the site
- Point out parking and an unloading spot
- Share the asbestos register for older buildings
- Move anything stored against the joints
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. The first step is to call the office on 01277 525 020 or email the details over with what you know.
Read more
Why it’s worth doing now in Nonington
Every shower drives water through a split perimeter bead. Behind the frame, that can mean damp plaster, stained ceilings, corroded fixings and damaged insulation. Resealing now costs less than repairing interiors later. Converted and older buildings near places like Nonington tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
Why appoint us
- Coloured sealants to suit the setting, where available
- Constructionline member for supplier checks
- Products installed to the manufacturer’s instructions
- Colour options checked against the specified product
Read what affects the cost and our accreditations.
Cost factors for facade joints
Each job is priced on its own details. The main factors are:
- Induction, permit and paperwork requirements
- The total length or number of joints
- How accessible the joints are
- How much existing material needs removing
Whether it’s a single area or a whole estate, the same things set the price: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
What we need to price the job
Good information means a firmer quote. Helpful details to send:
- Access details, including height
- Approximate linear metres or a joint schedule
- Where the site is, with the postcode
- Whether an asbestos survey exists
Quotes are fixed against the scope you send, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email us.
When it isn’t the sealant
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is one of these:
- Damaged frames that need replacing
- Water getting in through cracked render or porous masonry
- Providing access systems for the work
Not sure which it is? You can phone 01277 525 020 or email a schedule or drawings and we will tell you honestly.
What we seal
- Shopfront frames
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Cladding panel joints
- Window and door perimeters
- Coping and flashing joints