Facade and window perimeter sealing in Kimpton, Hampshire
Facade joint and window perimeter sealing on commercial buildings throughout Kimpton and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Leaks at window and door perimeters
- Air leaks through failed facade joints
- New sealant peeling off old mastic
Facade sealing for Kimpton sites
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
About our facade sealing in Kimpton
Water ingress at window frames is a frequent reason facilities managers contact us. Failed perimeter sealant is a frequent cause. If the evidence points away from the sealant, we say so before quoting. We work on stone and brick facade joints, coping and flashing joints and shopfront frames, and the failures we are asked to look at most are water coming in around window frames and weathered joints at frame-to-structure perimeters. One point of contact handles commercial sealant work in Kimpton from the first photos to the final walk-round, for single jobs and planned programmes alike.
Around smaller places like Kimpton, building work typically means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
Every job is signed off with a 12-month guarantee. It’s a plain promise: if the work we did fails within twelve months, we return to fix it.
- Place
- Kimpton (SP11)
- Wider area
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quotes
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
Questions we’re asked in Kimpton
Is Kimpton too far out for you?
Not at all. Kimpton is within our area. London and every South East county are within our area. Good photos up front let us bring everything on the first visit.
Would you work within a site like Andover War Memorial Hospital?
Yes. We work in healthcare settings as well as offices and schools. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
When can the area be used after sealing?
That comes down to the sealant and the temperature. Some products skin over quickly but need longer to cure fully, and we confirm it before leaving site.
Can you handle several sites?
Yes. Several buildings can share a single quote, and you deal with one contact throughout.
Can staff carry on working while you are here?
Yes, with some planning. We agree a sequence with your contact so just one area at a time is disrupted.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular checks let you plan resealing before leaks or damage.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Photos and a description are enough to start.
Different surfaces, different methods
Cladding panel joints
On sealed panel systems, every joint keeps water out. Failed runs are cut out and rebuilt end to end to the correct depth.
Brick and stone facades
Joints in natural stone need care to avoid staining. We use a product suitable for the stone where the specification names one, with masked edges for a clean line.
Aftercare for building managers
Once the work is signed off, these steps help:
- Ask about asbestos in pre-2000 mastic
- Combine resealing with other works that need access
- Check that rainwater leaves the facade the way it was designed to
- Avoid patch repairs on failed facade joints
Keep a note of which product went in and when. Future work can then match the product and colour without guesswork.
Planned resealing is cheaper than reacting to leaks. Regular checks let you renew joints before water gets in, rather than waiting for a ceiling stain.
Cost factors for facade joints
Each job is priced on its own details. The main factors are:
- How accessible the joints are
- Working within restricted access windows
- Removal of failed or old sealant
- Backing rod, priming and other preparation
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well.
What to include in your enquiry
For an accurate fixed quote, we need to understand the site. Useful things to include:
- Whether the building will be occupied during the work
- Access details, including height
- Approximate linear metres or a joint schedule
- The site address and postcode
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, speak to us on 01277 525 020 or email us.
Facade sealing around Kimpton: how the place shapes the job
Kimpton is about 68 miles from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, and main contractors there need mastic that keeps to the programme. Kimpton sits in one of the drier corners of the country, the South East. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, which is why external dates are agreed with the site manager.
For contractors refurbishing units at places like Weyhill Business Park, 1.6 miles east of Kimpton, the mastic covers cladding panels, roller-door and window perimeters. On a healthcare site such as Andover War Memorial Hospital, 4.6 miles to the east of Kimpton, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
Kimpton is about 5 miles west of Andover, in Hampshire. Commercial clients in Kimpton use us for work on facade joints, as part of our coverage of Hampshire. Our Hampshire coverage takes in 723 places, from busy centres to rural villages. Our Southampton page has more on work in that area.
Commercial sites across SP11 are covered for facade joints. Buildings on Cow Lane, Deacon Road and Down Road are within our area for facade joints. Sites close to Kimpton are covered too, including Great Shoddesden (1 mile north), Perham Down (2 miles north-west), Ludgershall (2 miles north-west), Tidworth (3 miles west) and Shipton Bellinger (3 miles west). A short drive away, we cover Andover (5 miles east), Whitchurch (11 miles east), East Anton (6 miles east), Harestock (15 miles south-east), Overton (15 miles east) and Picket Piece (7 miles east).
Local landmarks in Kimpton
For rail, the closest station is Grateley station, roughly 3.9 miles south. Well-known places in the area include Ludgershall Castle (2.6 miles north-west) and Andover War Memorial Hospital (4.6 miles east). Green spaces nearby include Anton Lakes and Quarley Hill.
Towns and villages near Kimpton
More services for Kimpton
Work for main contractors and building owners
Agents, factors and owners’ representatives all follow the same route: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Sites in Kimpton can sit alongside others in a wider programme across Hampshire.
When it isn’t the sealant
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Movement beyond what any sealant can handle
- Specialist high-level access methods
- Work on the window or framing system itself
If you’re not sure, just ring 01277 525 020 or email us and we will give you a straight answer before you book.
Joints and surfaces we work on
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Coping and flashing joints
- Shopfront frames
- Window and door perimeters
- Cladding panel joints
Our process
Occupied buildings need a little choreography. We sign and contain the area we are in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. Rural sites near Kimpton may need directions, gate codes or a contact on site. Add it to your enquiry and we’ll build it into the plan.
- Access, site rules and timing are settled with the client up front.
- We only seal when joints are dry and within the product’s temperature range.
- Each joint is cut out and the edges inspected.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
What we need from you
- For older buildings, check the asbestos register before work
- Let us know about inductions and permits
- Send your site hours and access windows
Getting a fixed quote
Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote you can plan around. If you have questions first, speak to us on 01277 525 020 or email drawings and photos.