Facade Sealing contractors in Kentsboro
Facade sealing in Kentsboro, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Hard, chalky sealant that no longer flexes
- Cladding panel joints that have opened up
- Previous reseals run over old sealant
Facade sealing across Kentsboro
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
When to call us in Kentsboro
Most facade joints fail through age and weathering. UV and weather harden the sealant until it can’t stretch with the building.
Look out for the following:
- Unsightly perimeter sealant on a visible elevation
- Leaks at window and door perimeters
- Draughts around frames and panels
- Weathered joints at frame-to-structure perimeters
Hospital estates such as Andover War Memorial Hospital (to the north-east of Kentsboro) tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- Their approach to joint depth and backing
- Will failed sealant be removed rather than covered?
- Whether primer will be used where the manufacturer specifies it
Facade sealing in Kentsboro
Managing agents and owners in Kentsboro ask us to, we reseal perimeters across whole elevations or a handful of problem windows. Either way, the method is the same: cut out, clean, back, prime where needed and seal. A 12-month guarantee applies to our workmanship. We work on cladding panel joints, perimeter joints where frames meet the structure and coping and flashing joints, and the failures we are asked to look at most are unsightly perimeter sealant on a visible elevation and sealant pulling away from frames or panels. One point of contact handles commercial sealant work in Kentsboro from the first photos to the final walk-round, whether it’s one building or several.
Conversions of older rural buildings near smaller places such as Kentsboro bring stone, flint, brick and timber up against new glazing. A product that grips an irregular face, with a colour that suits the building’s character, is usually what’s needed.
Work we carry out in Hampshire comes with a 12-month guarantee. Should something we installed fail, ring 01277 525 020 or email drawings and photos and we’ll come back to it.
- Location
- Kentsboro (SO20)
- Region
- Hampshire
- Cover
- A 12-month guarantee
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Mastic packages on Kentsboro sites
Central London is about 68 miles from Kentsboro. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, and main contractors there need mastic that keeps to the programme. The South East is one of the drier parts of the UK. Even so, frost and condensation on steel and glass are common on winter mornings, which is why external dates are agreed with the site manager.
Sites around Kentsboro get mastic sealed to the drawings and the programme, nothing improvised.
Kentsboro is about 5 miles south-west of Andover, in Hampshire. Anywhere in SO20, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. Our Hampshire coverage takes in 723 places, large and small. Southampton is covered too, around 18 miles from Kentsboro.
Work on facade joints is covered throughout SO20, whatever the building. We cover commercial and managed buildings on Mead Park Square, Upper Mead and Lower Mead and the roads nearby. If your building is just outside Kentsboro, we cover Over Wallop (2 miles south-west), Middle Wallop (2 miles south-west), Nether Wallop (2 miles south), Fox (2 miles north) and Red Rice (2 miles north-east). Nearby towns on our patch include Winchester (13 miles south-east), Andover (5 miles north-east), Chandler's Ford (14 miles south-east), Romsey (12 miles south), Hyde (12 miles south-east) and Tidworth (7 miles north-west).
Near you in Kentsboro
For rail, the closest station is Grateley station, roughly 2.6 miles west. Nearby you’ll also find Andover War Memorial Hospital (5 miles north-east). Not far away are Quarley Hill and Mill Lake.
From enquiry to sign-off
A typical day starts with protection: tape along each joint edge and covers over finishes, stock and equipment close by. On site, the work usually takes a day or two for a few elevations, and longer where access has to be moved around the building, and our waste is bagged and taken away as we go. Rural sites near Kentsboro may need directions, gate codes or a contact on site. Add it to your enquiry and we will build it into the plan.
- Photos, drawings or a visit tell us about the joints and the access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- We go over the completed work with you before leaving.
What we need from you
- Make sure the joints can be reached
- Let building users know which areas are affected
- Point out parking and an unloading spot
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, phone 01277 525 020 or use the quote form.
Advice
When something else is needed
Some faults sit outside our scope, and we point that out rather than sealing over them:
- Render or concrete edges that have broken away
- Arranging specialist high-level access, which is planned with the client
- Water getting in through cracked render or porous masonry
Not sure which it is? You can call the office on 01277 525 020 or email drawings and photos and we will tell you honestly.
What we seal
- Perimeter joints where frames meet the structure
- Shopfront frames
- Stone and brick facade joints
- Coping and flashing joints
- Cladding panel joints
- Window and door perimeters
Common questions from Kentsboro clients
Would you work within a site like Andover War Memorial Hospital?
Yes, provided the work is planned with the site’s estates team. The estates team’s permit system and infection-control rules come first, and the work is planned around them.
Is a smaller place like Kentsboro outside your area?
Not at all: smaller places are covered as well as towns. Our area covers London and the South East counties. Send photographs and a list of what needs doing, and we will plan the job to need as few trips as possible.
Do your applicators hold CSCS cards?
Yes. Our applicators hold CSCS cards, which many sites require.
How soon can the area be used again?
We’ll confirm how long the chosen product needs to cure, and sign any area that should be left alone.
Can you follow the specification on our project?
Yes. Send it with your enquiry, and the quote will be based on it, flagging anything that needs clarifying.
Will you just go over the old sealant?
No, never. Sealing over old material is one of the classic causes of early joint failure, so it all comes out first.
Can you quote from photographs?
Many jobs can be quoted from photographs, drawings or a joint schedule. If the job needs a look first, we will arrange a visit.
Why act early in Kentsboro
Leaving failed perimeter sealant also makes the eventual job bigger: edges get wet, render and timber deteriorate and frames can move. Early action keeps it simple. Converted and older buildings near places like Kentsboro tend to move, and aged sealant cracks. A sealant with the right movement capability, correctly sized, lasts far better.
Quantities, awkward access and phased working all shape the price. So do site requirements such as inductions and permits, along with the time of year for external work.
Why us?
- One phone line for London, the South East and Scotland
- Specification-led, product-correct work
- Commercial sealant work since 2005
- A range of standard colours, depending on the product
Read what affects the cost or our accreditations and insurance.
For managing agents and facilities managers
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
As a CHAS accredited contractor and Constructionline member, we’re straightforward to vet for your supplier list. Our insurance certificate can be sent along with the quote.
Towns and villages near Kentsboro
Other services in Kentsboro
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. Our advice:
- Check that rainwater leaves the facade the way it was designed to
- Combine resealing with other works that need access
- Brief window cleaners about newly sealed joints
- Don’t wait for a second leak before calling
Keep gutters, sills and drainage paths clear. Good drainage keeps water moving off the facade rather than sitting against the joints.
Planned resealing is cheaper than reacting to leaks. Inspect regularly and reseal sections as they start to fail, rather than waiting for a ceiling stain.