Facade Sealing contractors in Hatton of Fintray
We carry out facade joint and window perimeter sealing on commercial buildings in Hatton of Fintray and the surrounding area. Send photos or drawings for a fixed quote.
- Perimeter sealant that has split or peeled away
- Failed seals around shopfront and entrance frames
- Staining on stone next to old sealant
Facade sealing for businesses in Hatton of Fintray
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Facade sealing in Hatton of Fintray
Installing framed glazing systems isn’t part of our work. What we seal are the joints around them: the frame-to-structure perimeter, panel-to-panel joints and window and door surrounds, using sealants classified for facade or glazing use. If you have leaks at window and door perimeters and perimeter joints where frames meet the structure, we can put it right, on window and door perimeters, shopfront frames and cladding panel joints alike. Most enquiries from Hatton of Fintray start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Sites near smaller places like Hatton of Fintray can mean longer travel, so the mastic is planned with as few trips as the job allows. Send drawings, photos and the programme so everything needed arrives on the first day.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Where
- Hatton of Fintray (AB21)
- Region
- Aberdeenshire
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Site staff or a sealant specialist?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
What the job involves on each surface
Coping and flashing joints
Sometimes the coping or flashing itself has failed. Where the issue isn’t the sealant, we say so.
Render and coated surfaces
Where the joint will be painted over, a paintable hybrid or PU sealant may suit. The choice depends on the specification and finish.
FAQs: Hatton of Fintray
Can you work at a site such as Blackburn Industrial Estate, by Hatton of Fintray?
Yes. Our area takes in Hatton of Fintray and its surroundings, with estates and business parks such as Blackburn Industrial Estate included. Photos and a short description are enough for a first look.
Do you take on work at healthcare sites like Kingseat Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Which sealant do you use on facades?
Most facade and window perimeter joints take a low-modulus neutral-cure silicone. Hybrid or MS polymer, polyurethane and polysulphide sealants suit others, depending on the substrate and the specification.
Do you guarantee your work?
Yes, for 12 months. If our installation fails in that time, we return and fix it.
How long does a typical visit take?
It depends on the scope, though a typical visit typically takes anything from a single day to several weeks, depending on joint lengths, access and the weather. For bigger or phased jobs, we will set out a timescale with the quote.
Who decides which product is used?
A specification, where there is one, decides it. Without one, the joint decides: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Is old mastic on our building likely to contain asbestos?
For older buildings, yes, check before work starts. The dutyholder holds the asbestos register, so ask for it before we start. Suspect material is left alone until it has been tested.
Aftercare for building managers
Once the work is signed off, a little attention goes a long way:
- Confirm the survey covers external sealants in older buildings
- Avoid patch repairs on failed facade joints
- Share access with other external trades
- Keep pressure washers away from fresh sealant
Keep gutters, sills and drainage paths clear. Good drainage keeps water moving off the facade.
Coordinate facade sealing with other external works. Sharing the access keeps the cost down and cuts time on site.
Facades, frames and programmes in Hatton of Fintray
Building work in Hatton of Fintray comes under the Building (Scotland) Regulations 2004 and their technical handbooks, with warrants from the local authority verifier. Our job is to seal to that specification. Being in the east of Scotland, Hatton of Fintray gets less rain than the west coast. Frosty spells still affect external mastic dates. External dates keep a little give.
New units and refits on sites such as Blackburn Industrial Estate (to the south-west of Hatton of Fintray) need their panel and perimeter joints sealed to the specification. Extensions at sites like Kingseat Hospital, 4.4 miles to the north-east of Hatton of Fintray, usually sit beside working departments, and the mastic follows strict access rules.
Hatton of Fintray is about 6 miles south-east of Inverurie, in Aberdeenshire. Anywhere in AB21, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Hatton of Fintray is one of 179 places in Aberdeenshire on our list. For work in that direction, see our Aberdeen page, about 8 miles away.
Anyone looking for facade sealing in AB21 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. Buildings on Station Road, Hatton Court and Lairds Park are within our area. Close to Hatton of Fintray, our area also takes in Mill of Fintray (1 mile west), Blackburn (2 miles south), Kinmuck (3 miles north-west), Kinellar (3 miles south-west) and Kinmundy (3 miles east). Nearby towns on our patch include Inverurie (6 miles north-west), Westhill (6 miles south), Ellon (12 miles north-east), Banchory (15 miles south-west), Portlethen (13 miles south) and Garioch (5 miles north-west).
Near you in Hatton of Fintray
The closest station to Hatton of Fintray is Kintore station, about 3.2 miles west. Well-known places in the area include Hallforest Castle (3.9 miles west) and Kingseat Hospital (4.4 miles north-east). For a walk, there’s Temple Hill.
Building owners, agents and FMs in Hatton of Fintray
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, with each stage agreed with your site contact.
If you look after buildings for someone else, clear figures and clear communication matter. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Other services in Hatton of Fintray
Honest limits
Not every problem is a sealant problem, and we’re upfront when that’s the case. These need a different solution:
- Damaged frames that need replacing
- Joints too narrow for the movement they take, which need redesign
- Arranging specialist high-level access, which is planned with the client
If you are not sure, just speak to us on 01277 525 020 or email drawings and photos and we’ll give you a straight answer before you book.
Surfaces we seal
- Stone and brick facade joints
- Perimeter joints where frames meet the structure
- Window and door perimeters
- Shopfront frames
- Coping and flashing joints
- Cladding panel joints
Diagnose, treat, sign off
Working in a building that stays open takes some planning. We sign and contain the area we are in, keep walkways clear and work section by section so the rest of the building stays in use. For a building near Hatton of Fintray, directions, keys and a contact on the day are worth sorting early. That goes into the plan alongside the quote.
- Access, site rules and timing are settled with the client up front.
- We only seal when joints are dry and within the product’s temperature range.
- We remove the old bead and check the edges are sound.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- We hand over with our 12-month workmanship guarantee.
What we need from you
- Share your working hours and any access restrictions
- Send any specification or drawings in advance
- Explain the parking and delivery arrangements
Request a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. Smaller jobs need nothing more than photographs and a few notes.