Facade Sealing in Hartley Mauditt
Need facade sealing in Hartley Mauditt? Send us the details for a fixed quote, backed by a 12-month guarantee on the work.
- Weathered joints at frame-to-structure perimeters
- Sealant pulling away from frames or panels
- Gaps between rainscreen or cladding panels
Facade sealing across Hartley Mauditt
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Should maintenance staff do it?
General builders and handymen seal joints, but it isn’t their main trade. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Facade sealing in Hartley Mauditt, done properly
Every facade quote starts with how the joints will be reached. Tell us about access: whether scaffold is already up, what the client is arranging, and any restrictions on the site. If you’re dealing with discoloured or dirty facade joints and perimeter sealant that has split or peeled away, we can help, whatever the surface. A specialist sealant contractor works differently from a general builder: on jobs in Hartley Mauditt, preparation and product choice get the time they need.
Around smaller places like Hartley Mauditt, building work typically means conversions of farm buildings, a few new houses or an extension to a hall or school. Each still needs a proper mastic package: window perimeters, facade joints and internal sealant to the specification.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we are clear about what is covered before work starts.
- Location
- Hartley Mauditt (GU34)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Price
- A fixed quote before we start
- Call
- 01277 525 020
- Page updated
- 3 November 2026
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Providing access systems for the work
- Damp caused by condensation inside the building
- Work on the window or framing system itself
If in doubt, give us a call on 01277 525 020 or email a schedule or drawings and we will say what we think.
Where we work in Hartley Mauditt
- Window and door perimeters
- Perimeter joints where frames meet the structure
- Stone and brick facade joints
- Shopfront frames
- Coping and flashing joints
- Cladding panel joints
Aftercare for building managers
For the best life from the joints:
- Record the product and colour used on each elevation
- Never let anyone seal over old sealant
- Walk the elevations once or twice a year
- Clear debris that holds water against joints
Look at perimeter and panel joints as part of routine building checks. Watch for splits, gaps at the edges, hardening and discolouration; note where they appear.
Building facade joints into a maintenance cycle avoids emergency repairs. Regular checks let you renew joints before water gets in instead of after the damage.
Facade sealing around Hartley Mauditt: points for this area
Central London is about 45 miles from Hartley Mauditt. Towns within reach of London tend to keep building, from flats to offices and schools, and main contractors there need mastic that keeps to the programme. Hartley Mauditt is in the South East, one of the UK’s drier regions. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so the external programme keeps a little slack.
When units on a site such as Southlands Industrial Park (2 miles south-east of Hartley Mauditt) are refurbished or reclad, the panel joints and window perimeters are part of the mastic package. Hospital estates such as Alton Community Hospital (2.5 miles north-west of Hartley Mauditt) tend to grow and change in phases, often next to occupied wards, so facade and perimeter sealing has to fit the estates team’s plan.
Hartley Mauditt is about 3 miles south-east of Alton, in Hampshire. Businesses, contractors and managing agents in Hartley Mauditt use us for work on facade joints, as part of our coverage of Hampshire. 723 places across Hampshire fall within our area, Hartley Mauditt among them. Our Portsmouth page has more on work in that area.
Postcode districts covered here: GU34 for facade joints. Just outside Hartley Mauditt, we also work in East Worldham (1 mile north), Oakhanger (2 miles east), Upper Farringdon (2 miles west), Farringdon (2 miles west) and Chawton (2 miles north-west). Bigger towns within reach include Basingstoke (12 miles north-west), Farnborough (14 miles north-east), Fleet (12 miles north-east), Horndean (15 miles south), Aldershot (12 miles north-east) and Alton (3 miles north-west).
Around Hartley Mauditt
The nearest railway station is Alton station, roughly 2.5 miles north-west of the centre. A little further out are Alton Community Hospital (2.5 miles north-west) and The Romany Museum (1.6 miles south). Not far away are Selborne Hill and Deadwater Valley.
Also near Hartley Mauditt
Other services in Hartley Mauditt
Diagnose, treat, sign off
Tell us your site hours and access windows and we will plan around them. While we’re working, the area stays contained and tidy, and we check in with your contact before moving on to each new area. If others near Hartley Mauditt need work, visits can be combined, which keeps travel down. You’ll have a fixed quote before work starts.
- We look at the joints, the drawings and the access before pricing.
- Failed sealant is cut out along its full length.
- Both faces are cleaned and, where the product needs it, primed.
- Backing rod, or bond-breaker tape in shallow joints, limits the depth.
- A facade-grade sealant rated for the movement goes in, tooled to a concave profile.
- The completed runs are checked with you, then the 12-month guarantee applies.
Getting the site ready
- Tell us which areas need to stay in use
- Confirm the product named in the specification
- Warn occupants and staff about the work
Request a quote
Let us know the site, the scope and your timescale, and we’ll put a fixed quote together. To get it moving, give us a call on 01277 525 020 or send photos by email.
Advice
Common questions from Hartley Mauditt clients
Is Southlands Industrial Park, near Hartley Mauditt, within your area?
Yes. Estates, retail parks and business parks around Hartley Mauditt, Southlands Industrial Park among them, are all within reach. Photos and a short description are enough for a first look.
Can you take on a job at a hospital such as Alton Community Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
How long do sealant joints last?
It depends on movement, UV and weather, cleaning, traffic and the product. Treat them as maintenance items and inspect them regularly.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, because fresh silicone will not bond with aged silicone.
Do we need an asbestos check before resealing?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. The dutyholder’s asbestos register should be checked first; if it’s suspected, work stops until it has been tested. We don’t remove asbestos-containing materials.
Is it okay to overlay old mastic?
No. A bead run over old sealant soon lifts. We remove the failed sealant, clean the faces, set the depth and reseal.
Can you send site paperwork?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
Cost factors for facade joints
What shapes the price:
- The product specified
- Site requirements such as inductions and permits
- Whether old sealant has to be cut out first
- Location, for remote and island sites
The product called for affects the cost, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What we need to price the job
A few photos plus some basic facts will normally do. Please tell us:
- The asbestos register, for older buildings
- Any dates the work must fit around
- Rough lengths or quantities, or drawings if you have them
- The site address and postcode
A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
For managing agents and facilities managers
Whether you are a managing agent, a property factor or an owner’s representative: send details, get a fixed quote, we seal, guaranteed. Keys, access and contacts can be agreed in advance.
FMs need a contractor who is easy to get on site. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we’ll confirm them with the quote.