Flansham facade sealing
Our CSCS-carded applicators take on facade joint and window perimeter sealing on commercial buildings in Flansham. Send details for a fixed quote.
- Facade joints cracked through the middle
- Damp patches beside frames after rain
- Previous reseals run over old sealant
Facade sealing in Flansham
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle facade sealing in Flansham
Sealant around windows, doors and cladding panels stops rain reaching the wall behind. When a perimeter bead splits or peels, water finds its way behind frames and into the structure. We remove failed sealant and install a new bead chosen for the joint and how far it moves. We work on perimeter joints where frames meet the structure, cladding panel joints and window and door perimeters, and the usual reasons a site gets in touch are perimeter sealant that has split or peeled away and weathered joints at frame-to-structure perimeters. Whoever orders the work in Flansham, the brief is typically the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Conversions of older rural buildings near smaller places such as Flansham bring stone, flint, brick and timber up against new glazing. A product that grips an irregular face, with a colour that suits the building’s character, is typically what’s needed.
We sign every job off with a 12-month guarantee. It’s a plain promise: if our work fails within that year, we put it right.
- Location
- Flansham (PO22)
- Region
- West Sussex
- Guarantee
- A 12-month guarantee
- Price
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026
Questions about Flansham
Does the sea air around Flansham change the choice of sealant?
It can. Wind-driven rain and, closer to the shore, salt air are harder on external joints. Product choice and preparation matter more, and sea-facing elevations are worth inspecting more often.
Is hospital work, at somewhere like Bognor Regis War Memorial Hospital, something you do?
Yes. Healthcare sites are among the places we work. Each area is agreed with the ward or department and the estates team in advance.
What’s the quickest route to a quote?
You can use the quote form on this site; alternatively, call 01277 525 020 or use the quote form. Photos, drawings or a joint schedule help us quote quickly.
Is the work guaranteed?
Yes. Our workmanship is backed for 12 months on every job.
Do you replace failed glazing units?
No. A glazing contractor handles that. What we seal are the joints around frames and panels.
Can weather delay the job?
Outside, yes. The joint has to be dry and within the product’s temperature range, so frost, rain or cold mornings can delay outside work. Inside work is seldom held up.
Can you follow the specification on our project?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and we raise anything unclear before work begins.
Maintenance after handover
Keep the joints in good shape with a few simple steps:
- Keep sills, gutters and drainage paths clear
- Ask about asbestos in pre-2000 mastic
- Never let anyone seal over old sealant
- Inspect facade joints on a regular cycle
If new signage, brackets or services are fixed through a sealed joint, the seal needs making good. Make sure the joint is resealed afterwards.
Tie resealing in with redecoration, cladding repairs or other access. One set-up for several trades saves money and limits disruption.
Different surfaces, different methods
Render and coated surfaces
Sealant can only hold as well as the render or paint beneath it. Loose coatings are cleaned back first, and we’ll mention any edges that need repair.
Coping and flashing joints
Coping and flashing joints are included where sealant is the specified fix. They sit in the most exposed positions on the building and need a durable external sealant.
Places near Flansham
Also in Flansham
Site staff or a sealant specialist?
What you see is the finished bead, but most of the work is hidden. Correct depth, the right primer and a sealant matched to the movement are where general trades tend to cut corners.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Sites and facades in and around Flansham
With the shore within about 2 miles, Flansham counts as a coastal location. Schemes this close to the sea see their facade joints tested by wind and rain from the day they’re sealed, so joint design, primers and product choice deserve extra care. There are a number of hotels within about 2 miles of Flansham. Hotel refurbishments often run to tight programmes between busy periods, and perimeter and sanitary sealant has to keep up.
Work at a hotel such as Ancton House Hotel, 1.4 miles east of Flansham, tends to be programmed around bookings, mastic included. Building work at universities like University of Chichester (Bognor Campus) (to the south-west of Flansham) is often timed for the summer, mastic included. Extensions at sites like Bognor Regis War Memorial Hospital (to the south-west of Flansham) usually sit beside working departments, and the mastic follows strict access rules.
Flansham is about 2 miles north-east of Bognor Regis, in West Sussex. Anywhere in PO22, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. 373 places across West Sussex fall within our area, Flansham among them. Portsmouth is covered too, around 19 miles from Flansham.
We take on facade joints across the PO22 postcode area, whatever the building. We also cover Bilsham (1 mile east), Lidsey (2 miles north-west), Shripney (2 miles west), Yapton (2 miles north-east) and Barnham (2 miles north) for facade joints. Further afield, our area takes in Worthing (11 miles east), Chichester (7 miles west), Selsey (8 miles south-west), Littlehampton (5 miles east), Lancing (14 miles east) and Rustington (6 miles east).
Landmarks near Flansham
Around Flansham, our work takes us to commercial buildings near Felpham Community College and The Brooks Local Nature Reserve and the streets around them. For rail, the closest station is Barnham station, about 1.9 miles north of the centre. Nearby you will also find Tote Copse Castle (3.1 miles north-west) and Bognor Regis Museum (2.3 miles south-west).
Honest limits
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Joints whose design needs changing by the specifier
- Water getting in through cracked render or porous masonry
- Replacing glass or failed glazing units
If you are not sure, just speak to us on 01277 525 020 or email us and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Perimeter joints where frames meet the structure
- Shopfront frames
- Cladding panel joints
- Coping and flashing joints
- Stone and brick facade joints
- Window and door perimeters
Commercial clients in Flansham
Hospitality, education, healthcare, office and retail clients come to us directly as well. We plan around the way the building is used, so the building keeps working while we do.
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. We can agree access arrangements and keyholder contacts beforehand.
Our process
Working in a building that stays open takes some planning. We sign and contain the area we’re in, with routes through the building left open and move on in phases so staff and visitors can carry on around us. For a building around Flansham, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.
- Access, site rules and timing are settled with the client up front.
- We only seal when joints are dry and within the product’s temperature range.
- Each joint is cut out and the edges inspected.
- Faces are cleaned, primed where needed and backed.
- Sealant is gunned in and tooled hard onto both faces.
- Once signed off, the work carries our 12-month guarantee.
Preparing the site
- Make sure the joints can be reached
- Tell staff and tenants when we will be in
- Tell us which areas need to stay in use
Ask for a quote
Send us photographs, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we will arrange a site visit.