Facade and window perimeter sealing in Fittleworth, West Sussex
We carry out facade joint and window perimeter sealing on commercial buildings in Fittleworth and the surrounding area. Send details for a fixed quote.
- Old perimeter mastic that has dried out
- Damp patches beside frames after rain
- Gaps between rainscreen or cladding panels
Facade sealing near Fittleworth
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Questions we’re asked in Fittleworth
Can you work to our programme on a site in or near Fittleworth?
Yes. The mastic is planned around your key stages. Tell us which site documents you need, such as RAMS, our insurance certificate or CSCS details, and they’re confirmed with the quote.
Is a smaller place like Fittleworth outside your area?
No. Places such as Fittleworth are covered as much as the big towns. We cover Greater London and the counties of the South East. Good photographs up front let us bring everything on the first visit.
Is old mastic on our building likely to contain asbestos?
For older buildings, yes, check before work starts. The dutyholder holds the asbestos register. Suspect material is left alone until it has been tested.
Which sealant will you use?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you handle several sites?
Yes. Several buildings can share a single quote, with one point of contact across South East England, Greater London and Scotland.
Does weather matter for sealant work?
It can, for external work. Wet joints and cold, damp or frosty conditions stop the sealant bonding properly, so external work may be moved if conditions aren’t right. Internal work is far less affected.
What about RAMS and site documents?
Requirements differ from site to site, so tell us what you need and we will confirm it when we quote.
About our facade sealing in Fittleworth
Installing framed glazing systems isn’t part of our work. We handle the sealant joints that surround those elements: the frame-to-structure perimeter, panel-to-panel joints and window and door surrounds, using sealants classified for facade or glazing use. If you have weathered facade joints that have lost their grip and cold air coming in at window perimeters, we can put it right, whatever the surface. A specialist sealant contractor works differently from a general builder: in Fittleworth, that means joint design, primers and backing rod as standard.
Around smaller places like Fittleworth, building work normally means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Fittleworth (RH20)
- Region
- West Sussex
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Fittleworth
What else we do in Fittleworth
When to call us in Fittleworth
Overlaying old sealant is a common shortcut that fails quickly. Cured silicone won’t accept a new silicone bead, and the patch soon lifts.
If one of these sounds familiar, it’s time for a closer look:
- Perimeter sealant that has split or peeled away
- Patch repairs that keep failing
- Leaks at window and door perimeters
- Staining on stone next to old sealant
For a contractor at a hotel such as The Swan Hotel, 0.5 miles to the south of Fittleworth, the mastic often has to be finished before a reopening date.
Comparing quotes
- Which product they’ll use, and why it suits the joint
- Whether their applicators hold CSCS cards
- What level of public liability insurance do they hold?
- What the guarantee covers, and for how long
Surface by surface
Window and door perimeters
Frame-to-wall joints at windows and doors are the facade joints we reseal most. A low-modulus neutral-cure product, chosen for the frame and wall, goes in finished to throw water off the joint.
Coping and flashing joints
Where the specification calls for sealant at copings or flashings, we can seal them. These joints take full exposure to weather.
Commercial clients in Fittleworth
Whether you’re a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.
Main contractors use us as their sealant subcontractor. Programme, specification and site rules come first, with CSCS-carded applicators on site.
General trades versus a specialist
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
General builders and handymen seal joints, but it isn’t their main trade. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint.
Facade sealing in Fittleworth: the local picture
Fittleworth sits in one of the drier corners of the country, the South East. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, which is why external dates are agreed with the site manager. Fittleworth is about 42 miles from central London. Building activity in the commuter belt runs from new flats near stations to business park refurbishments, and each scheme needs its mastic sealed to programme.
Historic houses such as Old Place Manor, 2.1 miles east of Fittleworth, are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products. Projects at schools like Fittleworth CofE Village School work to term dates, so mastic is programmed tightly.
Fittleworth is about 11 miles north of Littlehampton, in West Sussex. Businesses, contractors and managing agents in Fittleworth can call on us for facade joints. Our West Sussex coverage takes in 373 places, from busy centres to rural villages. For work in that direction, see our Brighton page (21 miles or so).
If you need facade sealing in RH20, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. We cover commercial and managed buildings on Fairmead Close, School Lane and Greatpin Croft and the roads nearby. Close to Fittleworth, our area also takes in Bedham (1 mile north), Lower Horncroft (1 mile south), Coates (1 mile south-west), Hardham (2 miles south-east) and Coldwaltham (2 miles south-east). Further afield, our area takes in Horsham (13 miles north-east), Worthing (12 miles south-east), Bognor Regis (13 miles south-west), Chichester (13 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (15 miles south-east).
Around Fittleworth
In Fittleworth, that means premises near The Swan Hotel. The nearest railway station is Pulborough station, roughly 1.9 miles east. Other landmarks nearby include Coates Castle (1.5 miles south-west) and Coultershaw Heritage Site (2.5 miles west). Open spaces near Fittleworth include Bignor Hill and The Mens.
Why it’s worth doing now in Fittleworth
If access is already up for other work, resealing at the same time makes sense. Coordinating facade sealing with other external works avoids paying for access twice, saving a second set-up. Older rural buildings around Fittleworth move with the seasons, and rigid or tired sealant can’t keep up. A sealant with the right movement capability, correctly sized, lasts far better.
We don’t publish prices, because the scope varies so much from one building to the next. For a fixed figure, call for a quote and we will price your job on its own details.
What you get with us
- One phone line for London, the South East and Scotland
- Matching to RAL references, product permitting
- Constructionline member for supplier checks
- Fully insured, including public liability cover
Diagnose, treat, sign off
We follow your site rules from the start: sign-in, induction and whatever permit system the building uses. With the paperwork done, we take the joints in the sequence agreed with you. If others near Fittleworth need work, visits can be combined. A fixed quote is given before anything starts.
- We start with photos, drawings or a visit to see the joints and agree access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and the joint faces cleaned.
- Primer goes on where the product data asks for it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- We go over the completed work with you before leaving.
What we need from you
- Share your working hours and any access restrictions
- Explain the parking and delivery arrangements
- Have the specification and drawings to hand
Ask for a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we’ll price the work to it. Smaller jobs need nothing more than photographs and a few notes.