Facade Sealing in Esher
We carry out facade joint and window perimeter sealing on commercial buildings in Esher and the surrounding area. Send details for a fixed quote.
- Leaks at window and door perimeters
- Failed seals around shopfront and entrance frames
- Failed sealant on precast panel joints
Facade sealing for Esher sites
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our facade sealing in Esher
Some clients need every window on a block resealed; others need a few leaking frames sorted. The approach doesn’t change with the size: cut out, clean, back, prime where needed and seal. Each job carries our 12-month guarantee. We work on coping and flashing joints, perimeter joints where frames meet the structure and cladding panel joints, and what we’re called in for most is water coming in around window frames and weathered facade joints that have lost their grip. A single leaking joint is often how a building in Esher first comes to us: we look at the rest while we’re there and tell you what we find.
Around places like Esher, a lot of construction is the conversion of older buildings, which leaves joints between old walls and new frames that need a sealant able to take the movement.
Our workmanship is guaranteed for 12 months, wherever the site is. If our installation lets you down in that time, we return and fix it.
- Location
- Esher (KT10, KT7, KT8)
- Wider area
- Surrey
- Cover
- A 12-month guarantee
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Page updated
- 3 November 2026
Quoting for work in Esher
To price the job, we consider:
- Travel to remote or island sites
- Whether old sealant has to be cut out first
- Backing rod, priming and other preparation
- How accessible the joints are
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site requirements come into it too.
Details that help us quote
Good information means a firmer quote. Helpful details to send:
- Photos of the joints, close up and from further back
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- Access details, including height
Photos, drawings or a schedule of the joints are often enough for a fixed quote. Where a site visit makes more sense, we will arrange one.
After the work
Cleaning and maintenance staff play a part too. Pass these on to them:
- Check that rainwater leaves the facade the way it was designed to
- Brief window cleaners about newly sealed joints
- Keep the sealant details on the building file
- Add perimeter sealant to planned maintenance checks
Look at perimeter and panel joints as part of routine building checks. Signs to look for are cracking, edges lifting, chalking and stiffness.
Check older buildings for asbestos before disturbing old mastic. Some older mastics contain it, and if it’s suspected, we stop until it has been tested.
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist brings correct preparation, depth control with backing rod and a product suited to that particular joint, which is what makes a joint last.
There’s also the paperwork. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and we will confirm the paperwork you need with the quote.
Towns and villages near Esher
More services for Esher
FAQs: Esher
Would you work within a site like Molesey Community Hospital?
Yes, healthcare and care buildings are part of our work. Each area is agreed with the ward or department and the estates team in advance.
Is Esher too small for you to travel to?
No. Small places get the same service as large ones. We work across Greater London and the South East. Send photos and a list of what needs doing, and we will plan the job to need as few trips as possible.
Can you work in cold or wet weather?
We can work through the year, but sealant needs a dry joint and temperatures within the product’s range. Cold, damp mornings can delay a start.
How long does a job like this take?
The duration is planned around your programme and the access we’re given. You will have an expected duration with the quote.
Is it fine to apply new sealant on top of old?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
Is any job too small?
Small jobs are welcome alongside larger packages. Photos and a description are enough to start.
Can you fit around our working hours?
Mention the site’s hours and access windows in your enquiry, and we’ll plan around them. Our office runs Monday to Friday, 8am until 5pm.
What the job involves on each surface
Window and door perimeters
Frame-to-wall joints at windows and doors are the facade joints we reseal most. A low-modulus, neutral-cure product suits most frame-to-wall joints.
Precast concrete panels
Precast arrises sometimes crumble or carry old residue. Faces are cleaned to sound concrete, and damaged edges are reported before sealing.
On site: what to expect
We begin with a short walk round with whoever looks after the building, agreeing which joints are in scope, where to start and what must stay open. Then we strip out anything that has failed, prepare every joint and seal it. For a site in Esher, we plan so the whole job is done in one go where possible. Photos with rough sizes let us arrive with everything needed.
- We look at the joints, the drawings and the access before pricing.
- Failed sealant is cut out along its full length.
- Both faces are cleaned and, where the product needs it, primed.
- Closed-cell rod fixes the depth, and the sealant grips two sides only.
- The new sealant goes in and is tooled firmly onto both faces.
- The completed runs are checked with you, then the 12-month guarantee applies.
Getting the site ready
- Tell us which areas need to stay in use
- Tell staff and tenants when we’ll be in
- Make sure the joints can be reached
Request a quote
A handful of photographs and a postcode is the fastest way to a quote. Upload them with the quote form, or speak to us on 01277 525 020 or email us if you’d rather talk the job through.
Read more
Building and refurbishing in Esher
Esher is in the South East, one of the UK’s drier regions. Still, external mastic needs dry faces within the maker’s temperature limits, which isn’t every day, so external mastic is timed for workable conditions and agreed with the site manager. At about 15 miles from central London, Esher is within reach of the capital. Towns within reach of London tend to keep building, from flats to offices and schools, so mastic packages have to keep pace with busy programmes.
Projects at colleges like Esher Sixth Form College, 1.5 miles north-east of Esher, tend to run to term dates, so the mastic is planned tightly. Hotels like The Bear Hotel (less than half a mile south-west of Esher) rarely close for long, so refurbishment mastic is phased floor by floor. On a healthcare site such as Molesey Community Hospital, which lies north of Esher, new blocks and refurbishments go on while the hospital keeps running, so mastic work is sequenced carefully.
Esher is about 5 miles north-west of Epsom, in Surrey. We send applicators to Esher for facade joints, handled exactly as we handle every other area. Our Surrey coverage takes in 379 places. We also cover London, some 15 miles away.
We cover the KT10, KT7 and KT8 postcode districts. Buildings on High Street, Station Road and Warren Close are within our area for facade joints. Main routes into Esher include the A244 and A307, which helps when planning parking and deliveries for the job. We also cover West End (1 mile south-west), Lower Green (1 mile north), Hinchley Wood (1 mile east), Claygate (1 mile south-east) and Weston Green (1 mile north-east). Nearby towns on our patch include Guildford (12 miles south-west), Woking (10 miles west), Epsom (5 miles south-east), Redhill (12 miles south-east), Ewell (5 miles east) and Egham (9 miles north-west).
Near you in Esher
Recent enquiries here include premises near Albert Arms, Esher Church of England High School and Claremont Park and the streets around them. For rail, the closest station is Esher station, about 0.8 miles north-east. A little further out are Chessington Castle Hill (3.2 miles east) and No. 2 New Zealand General Hospital (2.9 miles north-west). Not far away are Jubilee Wood and The Lake.
Commercial clients in Esher
Main contractors use us as their sealant subcontractor. We work to your programme, your specification and your site rules.
Whether you are a managing agent, a property factor or an owner’s representative: send the details, accept a fixed quote, and we carry out and guarantee the work. Keys, access and contacts can be agreed in advance.