Facade and window perimeter sealing in Bentley, Hampshire
Facade joint and window perimeter sealing on commercial buildings throughout Bentley and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Leaks at window and door perimeters
- Weathered facade joints that have lost their grip
- Cladding panel joints that have opened up
Facade sealing across Bentley
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Why it’s worth doing now in Bentley
Open facade joints also let air and dirt through: occupants notice draughts and cold spots around windows. Resealing deals with the draught as well as the leak. Halls, stores and units around places like Bentley may not be checked every day, so a failed joint can leak for a while before anyone sees it. Resealing early avoids that.
We don’t publish prices, since every building and every scope is different. For a fixed figure, call for a quote.
Why appoint us
- Sealing commercial buildings since 2005
- Colour agreed before work starts
- Coloured sealants to suit the setting, where available
- Constructionline member
See how commercial sealant jobs are priced and our accreditations.
Facade sealing for commercial buildings in Bentley
We don’t install glazing systems or replace glass. What we seal are the joints around them: perimeter joints where frames meet the structure, panel joints and window perimeters, using sealants classified for facade or glazing use. We work on window and door perimeters, stone and brick facade joints and shopfront frames, and the failures we are asked to look at most are air leaks through failed facade joints and old perimeter mastic that has dried out. Searching for sealant specialists in Bentley? We’ve been sealing commercial buildings since 2005, CHAS accredited and a Constructionline member.
Around smaller places like Bentley, building work usually means conversions of farm buildings, a few new houses or an extension to a hall or school. Perimeters, facade joints and internal sealant all need doing properly, however small the scheme.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Place
- Bentley (GU10, GU34)
- Region
- Hampshire
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Building owners, agents and FMs in Bentley
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
Main contractors use us as their sealant subcontractor on new-build and refurbishment projects. We work to your programme, your specification and your site rules.
Questions about Bentley
Is Bentley too far out for you?
No. Places such as Bentley are covered as much as the big towns. We work across Greater London and the South East. Where we can, we group nearby jobs to make the most of each trip.
Can you work around term dates at a campus such as University for the Creative Arts?
Yes. Tell us the term dates, vacation periods and access windows, and we will plan the work around them. We’re CHAS accredited and a Constructionline member, and paperwork such as RAMS is confirmed with the quote.
What about RAMS and site documents?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Can you work to our specification?
Yes. Include it with the drawings when you ask for a quote, and the quote will be based on it.
Do you replace failed glazing units?
No. Glazing, windows and glass replacement aren’t part of our work. We seal the joints around them, such as perimeter joints where frames meet the structure.
How do you choose the sealant?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Will you come and look before quoting?
It depends on the job. Simple work can often be priced from photos, while larger or less clear jobs get a site visit first.
Nearby places to Bentley
What else we do in Bentley
Our process
The first thing on site is a walk round with your contact, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. For work around Bentley, we aim to finish in one visit, so we ask for photographs and rough sizes first. That way the right products come on the day.
- Photos, drawings or a visit tell us about the joints and the access.
- Product choice follows the joint’s movement and substrate.
- Failed beads are removed in full and the joint faces cleaned.
- Primer is applied where the maker specifies it.
- Backing rod is fitted and the new sealant gunned in and tooled.
- The finished joints are checked with you.
Getting the site ready
- Point out any areas we must not close
- Clear stock, furniture or equipment away from the joints
- Explain the parking and delivery arrangements
Request a quote
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photographs and a description will do.
Related advice
Cost factors for facade joints
Sealant work doesn’t have a standard rate, because every site is different. What we look at:
- The site’s rules and procedures
- Removal of failed or old sealant
- The product specified
- Any access equipment needed
No two sites price the same: joint size, product, access and site hours all play a part. A fixed quote follows once we understand the job.
Details that help us quote
A few photographs plus some basic facts will normally do. Please tell us:
- The product your specification calls for
- What the building is and how it’s used
- Approximate linear metres or a joint schedule
- When you need the work done
The quickest route to a quote is a few photos and the site postcode. Upload them with the quote form, or call 01277 525 020 or email drawings and photos if you’d rather talk the job through.
Facade sealing in Bentley: the local picture
The South East is one of the drier parts of the UK. That doesn’t stop wet spells, or frosty starts that leave panels too damp to seal, so external mastic is timed for workable conditions and agreed with the site manager. Bentley is about 40 miles from central London. Commuter-belt towns tend to see a steady flow of new flats, offices and commercial schemes, so mastic packages have to keep pace with busy programmes.
Historic houses such as Farnham Castle (3.8 miles north-east of Bentley) are a reminder of the older buildings in the wider area, where sealing against old stone, brick or timber needs compatible products. University estates such as University for the Creative Arts (to the north-east of Bentley) tend to have a rolling programme of new buildings and refurbishments, each with window perimeters and facade joints to seal.
Bentley is about 4 miles west of Farnham, in Hampshire. Across the GU10 postcode area, the process is the same: details in, fixed quote out, then sealing and a 12-month guarantee. We work across 723 places in Hampshire, large and small. Sites around Reading have their own page, about 18 miles away.
Commercial sites across GU10 and GU34 are covered. We cover commercial and managed buildings on Station Road, Broadlands Close and Eggars Field. We also cover Isington (1 mile south-west), Blacknest (1 mile south-east), Bucks Horn Oak (2 miles south-east), Holt Pound (2 miles east) and Binsted (2 miles south). Nearby towns on our patch include Basingstoke (11 miles north-west), Farnborough (9 miles north-east), Fleet (6 miles north), Aldershot (6 miles north-east), Alton (5 miles south-west) and Petersfield (13 miles south).
Around Bentley
In Bentley, that means premises near The Star Inn. The closest station to Bentley is Bentley (Hampshire) station, roughly 0.8 miles south-east of the centre. A little further out are Chase Community Hospital (5.9 miles south) and Barley Pound (1.7 miles north-east). The countryside around Bentley includes Farnham Park and Holybourne Hill.
When it isn’t the sealant
Before quoting, we check that sealant is the right answer. It isn’t the answer for:
- Work on the window or framing system itself
- Damp caused by condensation inside the building
- Providing access systems for the work
If in doubt, speak to us on 01277 525 020 or email us and we will say what we think before you book.
Surfaces we seal
- Window and door perimeters
- Coping and flashing joints
- Cladding panel joints
- Stone and brick facade joints
- Shopfront frames
- Perimeter joints where frames meet the structure
What we’re called out for in Bentley
Overlaying old sealant is a common shortcut that fails quickly. Fresh silicone won’t stick to cured silicone, so the new bead peels away within a season or two.
If one of these sounds familiar, it’s time for a closer look:
- Unsightly perimeter sealant on a visible elevation
- Failed seals around shopfront and entrance frames
- Draughts around frames and panels
- Water coming in around window frames
For contractors at a school such as Bentley Church of England Primary School, sealing has to be finished before term starts.
Comparing quotes
- Is the sealant right for the movement and the substrate?
- How the joint faces will be prepared and primed
- How the existing material will be dealt with
- The terms of the workmanship guarantee