Expansion Joint Sealing in The Moor
Expansion and movement joint sealing in walls, decks and floors across The Moor, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Joints where the bead has lost adhesion
- New sealant over old, now failing
- Water dripping through deck or ramp joints
Expansion joint sealing near The Moor
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
About our expansion joint sealing in The Moor
Width, depth and product all have to work together. The joint has to be wide enough for the expected movement and the sealant’s movement capability while depth is limited by backing rod or, in shallow joints, a bond-breaker. For wider joints, the width-to-depth ratio is often around 2:1, as the manufacturer advises and the bead bonds to the sides, never the back. We work on precast concrete panel joints, car park decks and ramps and podiums and floor movement joints, and the failures we are asked to look at most are water dripping through deck or ramp joints and movement joints with split or torn sealant. A specialist sealant contractor works differently from a general builder: in The Moor, that means joint design, primers and backing rod as standard.
Jobs around smaller places like The Moor are planned so the whole job is done in one visit, with the right materials on hand. Note joint widths and the traffic that uses them, and we will take it from there.
Our 12-month guarantee is about workmanship, not wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we’re clear about what is covered before work starts.
- Location
- The Moor (TN18)
- Region
- Kent
- Cover
- 12 months on every job
- Quote
- Fixed quote, scope in writing
- Call
- 01277 525 020
- Last updated
- 3 November 2026
FAQs: The Moor
Do you cover business parks and estates near The Moor, such as Hawkhurst Station Business Park?
Yes. Estates, retail parks and business parks around The Moor, Hawkhurst Station Business Park among them, are all within reach. Send details of the unit and the work through our quote form for a quick quote.
Would you work within a site like Hawkhurst Community Hospital?
Yes, healthcare and care buildings are part of our work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Can you work to our specification?
Yes. The specification and the manufacturer’s installation guidance are what we work to, and any queries are raised before we start.
How long before the joints can be used?
The product and site conditions decide that. Some products skin over quickly but need longer to cure fully, so we will confirm the curing time on the day.
Does the weather affect joint sealing?
Sealing onto a damp surface leads to adhesion failure, so external work waits for suitable conditions. We agree a revised date with you.
Can you send site paperwork?
Requirements differ from site to site, so list what you need, whether RAMS, insurance or CSCS details, and we will confirm with the quote.
Do you cover The Moor?
Yes. The Moor is in our area and the rest of Kent, within our coverage of Greater London, South East England and Scotland. To discuss a job, phone 01277 525 020 or email the details over.
Honest limits
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is any of the following:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
- Crumbling edges that would give a new bead nothing sound to grip
If you are not sure, just phone 01277 525 020 or send photos by email and we will give you a straight answer.
Joints and surfaces we work on
- Cladding panel joints
- Precast concrete panel joints
- Podiums and floor movement joints
- Brickwork movement joints
- Blockwork control joints
- Car park decks and ramps
Aftercare for building managers
Regular inspection catches problems early. In particular:
- Record the sealant used and the date in the O&M file
- Reopen bays and walkways only after the stated cure time
- Brief car park operatives to protect joint lines during winter clearance
- Act on the first tear or lifting edge rather than waiting
Our workmanship on movement joints carries a 12-month guarantee. Keep the handover details, product and date with your O&M records so future maintenance isn’t guesswork.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Broken arrises jolt trucks, loads and drivers, and the damage spreads along the joint. Sealing early protects the edges.
General trades versus a specialist
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Some joints are best left to specialists: for instance fire-rated seals that must match a tested detail, trafficked floor joints and external movement joints. Getting these wrong usually costs more in the end than doing them right.
Also in The Moor
Leave it or put it right?
A failed joint seal doesn’t mean the slab, panel or wall needs replacing. If the material either side is sound, a properly prepared reseal restores the joint. We will flag where edges need repair before sealing. Around The Moor, it’s better to renew all the failing joints at once. Photos of every joint help us quote for the whole job.
Quantities, awkward access and phased working all shape the price. Site requirements like inductions and permits play a part as well.
Why appoint us
- Constructionline member for supplier checks
- Coloured sealants to suit the setting, where available
- Sealing commercial buildings since 2005
- One contact handling all your sites
Take a look at what affects the cost and how we’re accredited.
Expansion joint sealing around The Moor: how the place shapes the job
At about 41 miles from central London, The Moor is within reach of the capital. The South East has large numbers of industrial estates and warehouses along the motorway corridors; their floors carry heavy traffic every shift. Two named trading, business or retail sites lie within about 3 miles of The Moor. Their warehouses, yards and car parks are exactly where joints take the most punishment.
Across sites such as Bodiam Business Park, 2.7 miles to the south of The Moor, floor and movement joints can be sealed in phases so units keep working. A healthcare site such as Hawkhurst Community Hospital, 1 mile to the north-west of The Moor, depends on car parks, ramps and service yards whose joints take traffic all day.
The Moor is about 12 miles north of Hastings, in Kent. Commercial clients in The Moor can call on us for movement joints, as part of our coverage of Kent. We work across 931 places in Kent, large and small. For work in that direction, see our Brighton page.
We take on movement joints across the TN18 postcode area. Streets here include The Moor, Pipers Lane and The Chestnuts. Sites close to The Moor are covered too, including Hawkhurst (1 mile north-east), Little Conghurst (1 mile east), Pipsden (1 mile north-east), Four Throws (1 mile east) and Beal's Green (1 mile north). A short drive away, we cover Royal Tunbridge Wells (12 miles north-west), Tonbridge (15 miles north-west), Paddock Wood (11 miles north-west), Tenterden (8 miles east), Southborough (13 miles north-west) and Park Wood (14 miles north).
Landmarks near The Moor
We work on buildings around Collingwood Nature Reserve, The Eight Bells Hotel and Hawkhurst Church of England Primary School. For rail, the closest station is Etchingham station, about 3.3 miles south-west. Nearby you’ll also find Ticehurst House Hospital (4.6 miles west).
What we are called out for in The Moor
With no backing rod or bond-breaker in place, sealant grips the base of the joint too. Bonded on three faces, it can’t stretch evenly when the joint opens.
Most enquiries start with something like this:
- New sealant over old, now failing
- Joints where the bead has lost adhesion
- Torn sealant in brick or block movement joints
- Car park joints leaking onto vehicles below
For a school such as Marlborough House School, playground and building joints can be done in the holidays.
Before you book anyone
- Their public liability cover
- Whether old or failed sealant will be cut out, not overlaid
- Who will actually carry out the work
- Are they CHAS accredited or on Constructionline?
From enquiry to sign-off
We follow your site rules from the start: signing in, inductions and any permit to work. Once we are cleared to begin, we take the joints in the sequence agreed with you, and each area is checked before we leave it. For work around The Moor, we aim to finish in one visit, so photos and measurements up front really help. That way the right products come on the day.
- First, the joints are inspected for width, movement and the type of failure.
- You get a fixed quote with the product and its movement capability stated.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Before we start on site
- Tell us which areas need to stay in use
- Clear stock, furniture or equipment away from the joints
- Share the asbestos register for older buildings
Ask for a quote
The quickest route to a quote is a few photos and the site postcode. Send them through the quote form, or phone 01277 525 020 or email drawings and photos if you’d rather talk the job through.