
Expansion Joint Sealing in Tannochside
Work needed on a movement joint in Tannochside? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Sealant pulling off the joint face
- Brittle, chalky sealant on external joints
- Layers of sealant in a movement joint
Need expansion joint sealing in Tannochside?
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
Expansion joint sealing in Tannochside
For movement joints in Tannochside, photographs and approximate lengths are the best start. We’ll come and look where photographs don’t show enough. You can also speak to us on 01277 525 020 or email a schedule or drawings to talk the joints through. We work on cladding panel joints, precast concrete panel joints and brickwork movement joints, and the failures we’re asked to look at most are chipped joint edges on forklift routes and debris jammed in movement joints. Whether you call it commercial sealant work, mastic application or joint sealing, in Tannochside it comes down to the same thing: the right product in a properly prepared joint.
Around smaller Scottish places like Tannochside, slabs needing attention are often in agricultural buildings, workshops, schools and hotels. Concrete slabs and yards there take vehicles and weather.
We sign every job off with a 12-month guarantee. The promise is simple: if the work we did fails within twelve months, we return to fix it.
- Where
- Tannochside (G71)
- Wider area
- North Lanarkshire
- Guarantee
- 12 months on every job
- Quotes
- Fixed quote, scope in writing
- Phone
- 01277 525 020
- Last updated
- 3 November 2026

What we can’t put right
A proper diagnosis includes knowing what sealant can’t do. We’ll tell you if the real problem is one of these:
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Crumbling edges that would give a new bead nothing sound to grip
- Waterproofing layers buried beneath the sealant
Not sure which it is? You can call 01277 525 020 or send details through our quote form and we will tell you honestly.
Surfaces we seal
- Podiums and floor movement joints
- Car park decks and ramps
- Precast concrete panel joints
- Brickwork movement joints
- Cladding panel joints
- Blockwork control joints
From enquiry to sign-off
We schedule the visit to fit the site hours and access windows you give us. While we are working, the area stays contained and tidy, and your contact hears from us before we move to the next area. Jobs near Tannochside are often grouped with others in the same area. Tell us how flexible your dates are.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Phasing is agreed so decks, floors or entrances can stay in use where needed.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Backing rod or bond-breaker sets the depth, primer goes on where specified, and the sealant is applied and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Preparing the site
- For older buildings, check the asbestos register before work
- Send any specification or drawings in advance
- Explain the parking and delivery arrangements
Quotes
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, give us a call on 01277 525 020 or email a schedule or drawings.
Read more
Questions about Tannochside
Would you work within a site like Kirklands Hospital?
Yes, hospitals are one of the sectors we cover. Work is phased so departments keep running, under the site’s own rules.
Is Tannochside off your patch?
Not at all. Tannochside is within our area. We cover the whole of Scotland. Send photos and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is colour matching possible?
It depends on the product specified. Some ranges offer many colours, others very few, so we will confirm the colours available for the specified product with the quote.
What will the job cost?
It depends on the job: quantities, access, the product and any phasing. Call for a fixed quote and we will price it properly.
Do you use silicone or polyurethane in movement joints?
The right product depends on the joint. Facades often take a low-modulus silicone; floors and decks normally need a polyurethane unless the specification names something else.
Does the weather affect joint sealing?
Weather matters for any external joint: rain, frost and condensation all stop sealant bonding. Internal floor joints are far less affected.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Slabs, ramps and loading bays in Tannochside
Tannochside is on Scotland’s wetter western side. Open joints in external slabs take a lot of water. We wait for dry, workable days to seal them. At least three named trading, business or retail sites lie within about 3 miles of Tannochside. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
A healthcare site such as Kirklands Hospital (to the south of Tannochside) depends on car parks, ramps and service yards whose joints take traffic all day. Centres like Faraday Retail Park, 2.6 miles north-east of Tannochside, have mall floors and service decks whose joints carry steady traffic.
Tannochside is about 1 mile north of Uddingston, in North Lanarkshire. We cover Tannochside and the rest of North Lanarkshire, with the same fixed quotes and 12-month guarantee as everywhere else. 100 places across North Lanarkshire fall within our area, Tannochside among them. For work in that direction, see our Glasgow page (8 miles or so).
Work on movement joints is covered throughout G71, for business premises of every kind. If your site is on Lomond Road, Myrtle Road and Kilmuir Road or close by, we can quote for movement joints. Being close to the A752, Tannochside is easy to get to with materials and equipment. Nearby places we also cover include Uddingston (1 mile south), Birkenshaw (1 mile west), Viewpark (1 mile east), Old Monkland (2 miles north-east) and Bargeddie (2 miles north). Further afield, our area takes in Motherwell (4 miles south-east), Cumbernauld (9 miles north), Airdrie (4 miles north-east), Wishaw (7 miles south-east), Kilsyth (10 miles north) and Moodiesburn (6 miles north).
Around Tannochside
Locally, jobs take us to sites close to The Rowan Tree Inn and the streets around them. Tannochside’s nearest station is Uddingston station, about 0.8 miles south-west of the centre. Other landmarks nearby include David Livingstone Centre (2.1 miles south) and Kirklands Hospital (1.4 miles south). For a walk, there’s Strathclyde Loch.
Also near Tannochside
More services for Tannochside
After the work
A few simple habits keep the new joints working:
- Put movement joints on the planned maintenance inspection round
- Look over external and deck joints after a hard winter
- Keep racking legs and heavy point loads off floor joints
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
Floor joints on main traffic routes need watching more closely than the rest. Keep racking feet and heavy point loads off joint lines and flag chipped arrises before they spread.
Once debris packs a failed joint, the structure has nowhere to expand. The edges then take the pressure and start to spall and the reseal becomes an edge repair as well. A sound seal keeps the joint working.
Do you need expansion joint sealing in Tannochside?
Most movement joint failures come down to the joint stretching further than the sealant can take. Cohesive failure, a split through the centre, normally means the joint or product wasn’t right for the movement. The same product in the same joint tends to fail again, so we check width and movement before quoting.
What tends to prompt an enquiry:
- Water dripping through deck or ramp joints
- Layers of sealant in a movement joint
- Expansion joints split through the centre of the bead
- Joints packed with grit and debris
Schools such as Uddingston Grammar School have movement joints in their walls and floors that are easy to overlook.
What to look for in a quote
- Proof of insurance
- Will CSCS-carded applicators be on site?
- How joint depth will be controlled
- Whether old or failed sealant will be cut out, not overlaid
What the job involves on each surface
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. Trafficked floor joints often get a semi-rigid filler and a flexible sealant where the joint moves more.
Joints between different materials
Some mixed-material joints suit a hybrid sealant. We pick the product for the materials and the movement.
Why it’s worth doing now in Tannochside
A like-for-like reseal of a joint that keeps splitting rarely lasts. A higher movement class, or a design change by the engineer, may be needed and we’ll tell you honestly. Buildings that aren’t in daily use, such as halls and seasonal premises, may let water in unnoticed, giving water time to get in. Resealing early avoids that.
The specified product makes a difference, as does the preparation each joint needs, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
What you get with us
- Old sealant cut out, never sealed over
- Standard and matched colours in many product ranges
- CHAS accredited contractor
- 12 months’ guarantee on every job
Take a look at how commercial sealant jobs are priced or our accreditations.