Skippers Hill expansion joint sealing
Planning work on a movement joint in Skippers Hill? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Torn sealant in brick or block movement joints
- Brittle, chalky sealant on external joints
- Layers of sealant in a movement joint
Need expansion joint sealing in Skippers Hill?
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Expansion joint sealing in Skippers Hill, done properly
Mastic Doctor has sealed movement joints since 2005 for contractors, facilities managers and owners. CHAS accredited, Constructionline member, CSCS-carded applicators and five million pounds of public liability insurance. Each job is backed by a 12-month guarantee on the workmanship. We work on car park decks and ramps, podiums and floor movement joints and blockwork control joints, and the usual reasons a site gets in touch are spalled or broken joint edges in floors and decks and expansion joints filled with dirt and stones. Looking for mastic applicators who cover Skippers Hill? We’ve been sealing commercial buildings since 2005.
Halls, schools and small commercial buildings near places like Skippers Hill have movement joints in brick, block and concrete too. They tend to be overlooked until something leaks or cracks.
A 12-month guarantee applies to all our work. Should something we installed fail, speak to us on 01277 525 020 or send details through our quote form and we’ll come back to it.
- Where
- Skippers Hill (TN20)
- Wider area
- East Sussex
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
Common questions from Skippers Hill clients
Is Skippers Hill too far out for you?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work at a site such as Station Road Industrial Estate, by Skippers Hill?
Yes. We cover Skippers Hill and the area around it, including industrial estates, business parks and retail parks such as Station Road Industrial Estate. To start, just give us a call on 01277 525 020 or email a schedule or drawings with the unit, the joints involved and your access times.
Can the sealant be colour-matched?
In many cases, yes. Many products come in a range of standard colours, and matching to RAL references or surrounding finishes is often possible. We confirm what’s available for the specified product when we quote.
Do you work to architects’ specifications?
Yes. Send it with your enquiry, and the quote will be based on it.
What hours do you work?
The office is staffed Monday to Friday, from 8am until 5pm. Tell us your site hours and access windows and the work will be fitted around them.
Will you just go over the old sealant?
No. Failed sealant is removed and the faces cleaned back to sound, dry material first, because fresh silicone will not bond with aged silicone.
How do you choose the sealant?
The specification comes first, if there is one. If there isn’t one, it comes down to the joint: its movement, its surfaces and what it has to cope with.
Surface by surface
Cladding panel joints
Metal and composite panels shift considerably as temperatures change. The joints need a low-modulus sealant with enough movement capability.
Podium joints
Podium decks are exposed and often trafficked. We choose a product that copes with feet, wheels and weather.
Should maintenance staff do it?
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.
Putting right a botched joint often costs more than sealing it well at the start, since all of it has to come out and the faces be cleaned back again. For that reason, many FMs and contractors use a sealant specialist from the outset.
Traffic, movement and joints around Skippers Hill
Skippers Hill sits in one of the drier corners of the country, the South East. External joints still wait for dry conditions, while winter salting gets into any joint left open. At about 37 miles from central London, Skippers Hill is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds; their floors carry heavy traffic every shift.
A healthcare site such as Crowborough War Memorial Hospital (to the north-west of Skippers Hill) depends on car parks, ramps and service yards whose joints take traffic all day. On industrial estates such as Station Road Industrial Estate, 2.9 miles to the south-east of Skippers Hill, saw-cut floor joints, loading bay slabs and yard joints take the heaviest traffic.
Skippers Hill is about 4 miles south-east of Crowborough, in East Sussex. Anywhere in TN20, it works the same way: details in, fixed quote out, then sealing and a 12-month guarantee. Across East Sussex, 308 places are covered, Skippers Hill among them. There’s a separate page for Brighton, roughly 19 miles from Skippers Hill.
We cover the TN20 postcode districts for movement joints. Buildings on Queensmount, Criers Lane and Holly Beech Lane are within our area. Close to Skippers Hill, our area also takes in Butcher's Cross (1 mile north-east), Five Ashes (1 mile south), Woolbridge (1 mile north-east), Wellbrook (1 mile north-east) and Mayfield (2 miles north-east). Nearby towns on our patch include Eastbourne (15 miles south), Bexhill-on-Sea (15 miles south-east), Lewes (13 miles south-west), Hailsham (10 miles south), Crowborough (4 miles north-west) and Uckfield (6 miles south-west).
Landmarks near Skippers Hill
We work on buildings around Five Ashes CofE Primary School and The Five Ashes Inn. For rail, the closest station is Crowborough station, roughly 3.1 miles north-west. Well-known places in the area include Tickerage Castle (3.9 miles south-west) and Crowborough War Memorial Hospital (4.1 miles north-west). Open spaces near Skippers Hill include Selwyns Wood.
From enquiry to sign-off
We bring the products specified for the job, along with primers and backing rod. Any old material is cut back to clean, sound faces, primer goes on where the manufacturer specifies it, and the sealant is tooled off neatly. If others near Skippers Hill need work, visits can be combined, which keeps travel down. A fixed quote is given before anything starts.
- First, the joints are inspected for width, movement and the type of failure.
- You get a fixed quote with the product and its movement capability stated.
- The failed seal is removed and both faces are cleaned until sound and dry, and we tell you if any edges need repairing first.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- We check every joint before sign-off, and the work carries our 12-month guarantee.
Getting the site ready
- Point out any areas we must not close
- Arrange parking or a loading space
- Flag any permit to work we’ll need
Request a quote
Send us photos, drawings or a joint schedule and a fixed quote comes back to you. If the job needs a look first, we’ll arrange a site visit.
Advice
Nearby places to Skippers Hill
More services for Skippers Hill
What sets the cost
Before we quote, we look at:
- How much existing material needs removing
- How much there is to seal
- Site requirements such as inductions and permits
- The size and state of each joint
No two sites price the same: the joint sizes, the specified product, access and working hours each have a bearing. A fixed quote follows once we understand the job.
Sending details for a quote
There’s no need for a formal survey. A few details are enough to get going:
- A wide shot and a close-up of the area
- Asbestos survey details if the building is older
- How the joints are reached, and at what height
- Any dates the work must fit around
We quote a fixed sum against the scope you give us, so the cost is agreed before work starts. To start the process, ring 01277 525 020 or send photos by email.
Signs you need expansion joint sealing in Skippers Hill
Car park decks and floors face loads that walls never see. Tyres and wheels press on the edges and the sealant. A sealant that isn’t trafficable won’t last there.
If one of these sounds familiar, it’s time for a closer look:
- Sealant peeling off one face of the joint
- Hardened, cracked sealant on exposed facades
- Movement joints with split or torn sealant
- Expansion joints filled with dirt and stones
Schools such as Skippers Hill Manor School have movement joints in their walls and floors that are easy to overlook.
Before you book anyone
- Their approach to joint depth and backing
- Their public liability cover
- Are they CHAS accredited or on Constructionline?
- Is the sealant right for the movement and the substrate?
When something else is needed
We check first that sealant really is the fix. It isn’t the answer for:
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Joints too narrow for the movement, which need redesigning by the engineer
- Failed waterproofing membranes on podiums, roofs or decks (a waterproofing specialist’s job)
Not sure which it is? You can ring 01277 525 020 or email us and we will tell you honestly before you book.
Surfaces we seal
- Cladding panel joints
- Precast concrete panel joints
- Blockwork control joints
- Brickwork movement joints
- Podiums and floor movement joints
- Car park decks and ramps