Expansion Joint Sealing in Sibertswold
Planning work on a movement joint in Sibertswold? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Movement joints with split or torn sealant
- Rain penetration at brick or block movement joints
- Layers of sealant in a movement joint
Need expansion joint sealing in Sibertswold?
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Aftercare for building managers
Keep the joints in good shape with a few simple steps:
- Reopen bays and walkways only after the stated cure time
- Inspect movement joints alongside other routine building checks
- Plan racking layouts so feet don’t land on a joint
- Note which joints were done, when, and with what
Keep wheels, feet and water off new joints until the sealant has cured. How long that takes depends on the product, the temperature and the depth of the joint and we’ll tell you when each bay or area can reopen. Barriers left in place until then protect the finish.
External wall joints that fail let rain into the masonry and cavity. The first sign is often a damp patch indoors. Resealing promptly prevents internal damage.
Expansion joint sealing in Sibertswold
Our movement joint work takes in walls, panels, decks and floors: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it and we name it in the quote. If you have movement joints with split or torn sealant and rain penetration at brick or block movement joints, we can help, on brickwork movement joints, blockwork control joints and precast concrete panel joints alike. For commercial sealant work in Sibertswold, you deal with one contact from quote to sign-off, for single jobs and planned programmes alike.
For a site near Sibertswold, measurements and photos up front mean one trip where possible, with the right materials on hand. Tell us the joint widths if you can, and what drives or walks over them.
We stand by our work: 12 months, guaranteed. That covers our preparation and application.
- Location
- Sibertswold (CT15)
- Wider area
- Kent
- Cover
- 12 months on every job
- Quote
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
Nearby places to Sibertswold
Also in Sibertswold
FAQs: Sibertswold
Would you work within a site like Buckland Hospital?
Yes. Healthcare sites are among the places we work. Before anything starts, the estates team agrees permits, inductions and infection-control measures with us.
Is Sibertswold off your patch?
No. Small places get the same service as large ones. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Can you work while the building is occupied?
Yes, with some planning. Tell us your site hours and access windows and we will plan around them.
When is resealing likely to be due?
There isn’t a single answer, because life depends on how much the joint moves, how exposed it is and how it’s cleaned and used. Regular inspection is the best way to catch problems early.
How soon can the area be used again?
That comes down to the sealant and the temperature. Some take light use quickly, others need longer to cure, and we confirm it before leaving site.
Will you come and look before quoting?
It depends on the job. Straightforward work can often be priced from photos and measurements, while larger or less clear jobs get a site visit first.
What sealant do you use in movement joints?
We choose a sealant with a movement capability that suits the joint. Where two different materials meet, a hybrid sealant can be the better choice.
Joints that move: notes for Sibertswold
Sibertswold has two named business or industrial parks inside a 3-mile radius. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest. Sibertswold lies roughly 61 miles out from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors, and their floor joints take forklift and pallet-truck traffic all day.
Across sites such as Aylesham Industrial Estate, which lies north-west of Sibertswold, floor and movement joints can be sealed in phases so units keep working. Hospital campuses such as Buckland Hospital (4.6 miles south-east of Sibertswold) grow in stages, leaving movement joints wherever new blocks meet old.
Sibertswold (also: Shepherdswell) is about 4 miles north-west of Dover, in Kent. Sibertswold sits inside our coverage and the rest of Kent, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. 931 places across Kent fall within our area, including Sibertswold. London is covered too, some 61 miles away.
If you need expansion joint sealing in CT15, the process matches everywhere else we work: details, then a fixed price, then sealing and a 12-month guarantee. Buildings on Station Road, Hill Avenue and Eythorne Road are within our area for movement joints. Just outside Sibertswold, we also work in Halfway Street (1 mile south-west), Coldred (1 mile south-east), Waldershare (1 mile east), Eythorne (2 miles north-east) and Lydden (2 miles south). Further afield, our area takes in Canterbury (9 miles north-west), Margate (15 miles north-east), Dover (4 miles south-east), Folkestone (8 miles south), Ramsgate (13 miles north-east) and Broadstairs (15 miles north-east).
Local landmarks in Sibertswold
We work on buildings around The Bricklayers' Arms. There’s a railway station in Sibertswold itself: Shepherds Well station. Nearby you will also find Dover Transport Museum (3.6 miles south-east) and Buckland Hospital (4.6 miles south-east).
Different surfaces, different methods
Joints between different materials
Junctions between brick and render, or concrete and cladding, move independently. We choose a sealant that grips both faces priming where the maker calls for it.
Podium joints
Podium joints often sit within a waterproofing system. We reseal the joint where sealant is the specified fix and flag it if the membrane looks like the source.
Our process
We begin with a short walk round with whoever looks after the building, to confirm the scope, the order of work and any areas we must keep clear. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. Rural sites near Sibertswold may need directions, gate codes or a contact on site. Send that with the details and we will confirm the plan with the quote.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Old sealant and debris are cut out of every joint.
- Edges are checked, and we tell you if any need repairing before sealing.
- A sealant suited to the movement and traffic is laid to depth and tooled.
- Each area is handed back after its cure time, under our 12-month guarantee.
Preparing the site
- Make sure the joints can be reached
- Point out any areas we must not close
- Flag any permit to work we will need
Getting a fixed quote
Every job follows the same four steps: send details, get a quote, we seal, guaranteed. To take the first step, call the office on 01277 525 020 or send photos by email.
Read more
What we’re called out for in Sibertswold
Repeated failure often traces back to the wrong product. Products not classed for the movement fail early. BS EN ISO 11600 classifies building sealants by movement capability, and specifications often refer to it.
Any of the following is a good reason to get the joints checked over:
- Previous reseals laid over old sealant
- Chipped joint edges on forklift routes
- Expansion joints filled with dirt and stones
- Sealant peeling off one face of the joint
For an occupier at a site such as Pike Road Industrial Estate, 2.1 miles to the north-east of Sibertswold, the joints at loading doors and dock levellers typically see the hardest wear.
Before you book anyone
- What level of public liability insurance do they hold?
- How the joint faces will be prepared and primed
- Is depth set with backing rod, or bond-breaker tape in shallow joints?
- Whether old or failed sealant will be cut out, not overlaid
Should maintenance staff do it?
The visible bead is only part of the job. Backing rod, primer where specified and a joint designed to move with the building are where general trades tend to cut corners.
There’s also the paperwork. Many sites expect CSCS cards, RAMS and proof of insurance, and our CSCS-carded applicators are used to working under those rules.
Cost factors for movement joints
What shapes the price:
- The product specified
- Induction, permit and paperwork requirements
- Access and working height
- Removal of failed or old sealant
The product called for affects the cost, and so does the preparation, such as cutting out, priming or new backing rod. Access, phasing and site requirements come into it too.
Sending details for a quote
We can often quote from photographs and a few details. It helps to include:
- Anything awkward about access or site hours
- Whether an asbestos survey exists
- A wide shot and a close-up of the area
- Whether the building will be occupied during the work
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, phone 01277 525 020 or use the quote form.