Expansion joint sealing in Seaton
Expansion joint sealing for Seaton, from a contractor working since 2005. Fully insured and CHAS accredited.
- Water getting into the wall through a failed joint
- Expansion joints split through the centre of the bead
- Weathered movement joint sealant that no longer flexes
Expansion joint sealing for Seaton sites
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
For managing agents and facilities managers
Facilities managers want contractors who arrive with the paperwork sorted. Let us know the documents you need (RAMS, insurance certificate, CSCS details) and we will confirm them with the quote.
CHAS accredited and a Constructionline member, we’re straightforward to vet for your supplier list. We are fully insured, and our insurance certificate can go with the quote.
About our expansion joint sealing in Seaton
Brickwork and blockwork walls have vertical movement joints at intervals, and they’re easy to miss until the sealant fails. Once the seal fails, rain reaches the cavity and the joint can no longer close. The old seal comes out, backing goes in and a sealant with the right movement class is applied. If you are dealing with weathered movement joint sealant that no longer flexes and joints where the bead has lost adhesion, we can help, on podiums and floor movement joints, cladding panel joints and precast concrete panel joints alike. For commercial sealant work in Seaton, you deal with one contact from quote to sign-off, whether it’s one building or several.
Halls, schools and small commercial buildings near places like Seaton have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
The 12-month guarantee is for workmanship rather than wear and tear. Sealant wears with time, and movement, weather, cleaning and use decide how fast, so we spell out the cover before we begin.
- Location
- Seaton (CT3)
- Region
- Kent
- Cover
- A 12-month guarantee
- Quotes
- Quoted before any work starts
- Telephone
- 01277 525 020
- Page updated
- 3 November 2026
What affects the price in Seaton
Each job is priced on its own details. The main factors are:
- Quantities, in metres or numbers
- Backing rod, priming and other preparation
- The site’s rules and procedures
- How much existing material needs removing
Pricing movement joints depends on quantities, condition and access. Call for a quote.
What we need to price the job
To price the job accurately, we need a clear picture of the site. Send us:
- Your programme or deadline
- Asbestos survey details if the building is older
- What the building is and how it’s used
- Approximate linear metres or a joint schedule
Tell us about the building, the joints and when you need the work done, and we’ll put a fixed quote together. The easiest way is to phone 01277 525 020 or email a schedule or drawings.
Our process
Before we leave any area, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. For a building around Seaton, tell us how to find it and who will meet us. Add it to your enquiry and we will build it into the plan.
- We look at the joints, their width and how they’ve failed.
- Next, we fix a price and confirm the sealant we propose for the movement.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material, and we tell you if any edges need repairing first.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Finished joints are checked and backed by our 12-month guarantee.
Before we start on site
- Point out parking and an unloading spot
- Let building users know which areas are affected
- Make sure the joints can be reached
Ask for a quote
Every quote starts with the facts: the joints involved, quantities, access and the product called for. Share whatever details you have and we’ll fill any gaps with a visit.
Read more
What the job involves on each surface
Concrete and precast panel joints
Precast and concrete panel joints move daily. We use a sealant classed for the movement, laid over backing to depth.
Podium joints
On podiums, the joint can belong to a larger waterproofing detail. We reseal the joint where sealant is the specified fix, and tell you if the problem looks like the waterproofing below.
Honest limits
Honesty saves time and money. New sealant won’t cure:
- Changing the joint layout or spacing of a structure
- Leaks coming from the membrane rather than the joint seal
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
If you are not sure, just give us a call on 01277 525 020 or send photos by email and we’ll give you a straight answer before you book.
Joints and surfaces we work on
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
- Car park decks and ramps
- Brickwork movement joints
- Precast concrete panel joints
Expansion joint sealing in Seaton: the local picture
Seaton is about 57 miles from central London. The South East has large numbers of industrial estates and warehouses along the motorway corridors; their floors carry heavy traffic every shift. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.
For a school such as Wickhambreaux Church of England Primary School, playground and building joints can be done in the holidays. For an estate such as St Martins Hospital (3.6 miles west of Seaton), the joints in ramps, decks and long building elevations all need attention over time. Across sites such as Canterbury Industrial Park, which lies north of Seaton, floor and movement joints can be sealed in phases so units keep working.
Seaton is about 5 miles east of Canterbury, in Kent. Any commercial site in Seaton is covered. Seaton is one of 931 places in Kent on our list for movement joints. London is covered too, around 57 miles from Seaton.
Postcode districts covered here: CT3. If your building is just outside Seaton, we cover Wickhambreaux (1 mile west), Ickham (1 mile south-west), Bramling (1 mile south), Littlebourne (1 mile south-west) and Bekesbourne (3 miles south-west). Bigger towns within reach include Canterbury (5 miles west), Margate (11 miles north-east), Dover (11 miles south-east), Folkestone (14 miles south), Ramsgate (10 miles east) and Broadstairs (12 miles north-east).
Landmarks near Seaton
Locally, jobs take us to sites close to The Rose Inn. The closest station to Seaton is Bekesbourne station, about 2.8 miles south-west. Other landmarks nearby include St Martins Hospital (3.6 miles west).
Towns and villages near Seaton
Also in Seaton
Seaton: questions and answers
Can you take on a job at a hospital such as St Martins Hospital?
Yes. Healthcare sites are among the places we work. Work is phased so departments keep running, under the site’s own rules.
Does your area include sites such as Wingham Industrial Estate, near Seaton?
Yes. Estates, retail parks and business parks around Seaton, Wingham Industrial Estate among them, are all within reach. Photos and a short description are enough for a first look.
What exactly is a movement joint?
The terms overlap a great deal. A movement joint allows for expansion, contraction, shrinkage and loading, and the seal across it keeps water and debris out.
What do you charge?
That depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
Will you quote for a small job?
We quote for single jobs as well as large packages and programmes. Send details for a fixed quote.
Can you work while the building is occupied?
Normally, yes. We phase the work so most of the building stays in use, with each area protected and signed.
Are you fully insured?
Yes. Mastic Doctor is fully insured, public liability included.
Should maintenance staff do it?
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. A poor seal in places like these tends to cost more to put right later.