Roughdown expansion joint sealing
Work needed on a movement joint in Roughdown? We look at it, seal it with the right product and hand it over with a 12-month guarantee.
- Sealant pulling off the joint face
- Layers of sealant in a movement joint
- Weathered movement joint sealant that no longer flexes
Expansion joint sealing across Roughdown
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
Expansion joint sealing in Roughdown
Every structure moves a little, all the time: temperature, moisture, shrinkage and loading all make materials grow and shrink. Expansion and movement joints are built in so the structure can move without cracking, and the sealant in them keeps water and debris out. Mastic Doctor reseals movement joints in brickwork, blockwork, concrete, cladding and floors on sites in Roughdown. We work on precast concrete panel joints, car park decks and ramps and brickwork movement joints, and the failures we’re asked to look at most are movement joints with split or torn sealant and chipped joint edges on forklift routes. Whoever orders the work in Roughdown, the brief is normally the same: a fixed quote, no surprises on site and a 12-month guarantee behind the result.
Jobs around smaller places like Roughdown are planned so the whole job is done in one visit. Tell us the joint widths if you can, and what drives or walks over them.
Work we carry out comes with a 12-month guarantee. If an installation problem shows up, speak to us on 01277 525 020 or send photos by email and we’ll arrange a return visit.
- Place
- Roughdown (SO45)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Price
- Fixed quote, scope in writing
- Telephone
- 01277 525 020
- Updated
- 3 November 2026
What the job involves on each surface
Internal floor movement joints
Wheeled traffic chips floor joint edges that aren’t supported. We match the product to the traffic and the movement, and tell you if edges need repairing first.
Podium joints
Podiums take foot traffic, planters and weather. We choose a product that copes with feet, wheels and weather.
Maintenance after handover
Cleaning and maintenance staff play a part too. Share these points with them:
- Plan racking layouts so feet don’t land on a joint
- Treat a small split as a warning, not a cosmetic issue
- Put movement joints on the planned maintenance inspection round
- Record the sealant used and the date in the O&M file
Our workmanship on movement joints carries a 12-month guarantee. Record which product went into which joints in the building file.
Unsupported floor joint edges spall under forklift and pallet-truck wheels. Damaged edges make the floor rough and wear wheels faster and the broken length grows with every pass. Keeping the filler or sealant sound protects the floor.
From enquiry to sign-off
Before we leave any area, we remove the tape, clean down and inspect every joint, ready for your sign-off. If an area should be left alone while the sealant cures, we say how long and put signs out. Smaller jobs around Roughdown can be grouped with others nearby, which keeps travel down. A fixed quote is given before anything starts.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability and tell you if the design looks wrong for the movement.
- Every joint is cleared of the failed seal and any grit packed into it.
- Edges are checked, and we tell you if any need repairing before sealing.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Before we start on site
- Move anything stored against the joints
- Confirm the product named in the specification
- Share your working hours and any access restrictions
Getting a fixed quote
We quote a fixed sum against the scope you give us, so you know the figure before anyone is on site. To ask for one, call the office on 01277 525 020 or email a schedule or drawings.
Advice
Roughdown: questions and answers
Can you work on a hospital site such as Hythe Hospital?
Yes. We work in healthcare settings as well as offices and schools. We follow the site’s permits, sign-in and infection-control procedures in every area.
Is Roughdown off your patch?
No. Small places get the same service as large ones. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
How much does the work cost?
It depends on the job: the volume of work, the access, the specified product and how it’s phased. Call for a fixed quote.
Will you come and look before quoting?
That depends on the size and complexity of the job. Straightforward work can often be priced from photos and measurements, and bigger or more complex jobs typically get a visit.
Do you reseal car park expansion joints?
Yes. Tell us how the car park is used and which areas must stay open, and we will plan the phasing around it.
Can you handle several sites?
Yes. Several buildings can share a single quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
Can a joint be sealed if the edges are broken?
Sealant needs sound faces to bond to, so we will tell you if the edges need repairing before sealing. We flag it at the quote stage where we can see it.
Site staff or a sealant specialist?
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Redoing a failed joint usually costs more than getting it right at the outset, because the whole bead must be removed and the faces cleaned back again. That’s why many clients bring in a specialist from the beginning.
Warehouse floors and decks around Roughdown
Roughdown is within about 2 miles of the coast. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so a failed joint lets more in and the edges break up sooner. The 3 miles around Roughdown take in two named trading estates, business parks or retail parks. Floors, loading bays and yards on sites like these are where floor and movement joints work hardest.
At places like Hardley Industrial Estate, 1.5 miles north of Roughdown, joints are sealed a section at a time so operations carry on. Business parks such as Glenmore Business Park (to the north of Roughdown) have car parks, paved areas and long brick and panel elevations, all with movement joints. Sites like Hythe Hospital (2.8 miles north of Roughdown) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Roughdown is about 3 miles south of Hythe, in Hampshire. Looking for expansion joint sealing in Roughdown? We can help, as we do across Hampshire. Across Hampshire, 723 places are covered, including Roughdown. We also cover Southampton, some 7 miles away.
Postcode districts covered here: SO45. Close to Roughdown, our area also takes in Holbury (1 mile north), Blackfield (1 mile east), Little Holbury (1 mile north), Langley (1 mile south-east) and Hardley (1 mile north). Bigger towns within reach include Gosport (10 miles east), Eastleigh (10 miles north), Fareham (9 miles east), Totton (9 miles north-west), Chandler's Ford (11 miles north) and Hedge End (8 miles north-east).
Local landmarks in Roughdown
In Roughdown, that means premises near The New Forest Academy, among other places. The closest station to Roughdown is Netley station, roughly 4.3 miles north-east. Well-known places in the area include Beaulieu Abbey And Display Of Monastic Life (2.9 miles west) and Calshot Castle (3.5 miles east). Open spaces near Roughdown include Mercury Marshes.
Also near Roughdown
What else we do in Roughdown
Work for main contractors and building owners
If you look after buildings for someone else, you need clear quotes and clear reporting. We quote a fixed sum, confirm the scope and walk the finished work with you or your representative.
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. The work is planned around how the building runs, so the building keeps working while we do.
Why it’s worth doing now in Roughdown
Resealing is typically the answer, not replacing the element. If the material either side is sound, a properly prepared reseal restores the joint. We will flag where edges need repair before sealing. Older rural buildings around Roughdown move with the seasons, and rigid or tired sealant can’t keep up. The right product, sized to the joint, copes much better.
Access often affects the price as much as the sealing: easy-to-reach joints are quicker than those that need equipment to get to. Mention the access as part of your enquiry.
What you get with us
- Workmanship guaranteed for 12 months
- Joints cleaned back to sound surfaces
- Commercial sealant work since 2005
- Constructionline member for supplier checks
Read our cost guide or our accreditations.