Expansion joint sealing in Riverside of Blairs
Sealant work in Riverside of Blairs for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, quoted at a fixed price.
- Movement joints with split or torn sealant
- Weathered movement joint sealant that no longer flexes
- Layers of sealant in a movement joint
Expansion joint sealing in Riverside of Blairs
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How the job changes by surface
Car park decks and ramps
Water coming through deck joints is the usual first sign. We strip the old seal, prepare the edges and seal again flagging broken edges along the way.
Brickwork and blockwork joints
Masonry faces are often porous, dusty or crumbly. We clean them back to sound material and prime where the manufacturer specifies.
Expansion joint sealing in Riverside of Blairs
Buildings and slabs are never completely still: temperature, moisture, shrinkage and loading all make materials grow and shrink. Expansion and movement joints are built in so the structure can move without cracking and the seal across each one keeps out water and grit. We seal and reseal movement joints in walls, panels, decks and floors. We work on blockwork control joints, brickwork movement joints and cladding panel joints, and the usual reasons a site gets in touch are expansion joints split through the centre of the bead and joints packed with grit and debris. Looking for mastic applicators who cover Riverside of Blairs? We’ve been sealing commercial buildings since 2005.
Travel to smaller places like Riverside of Blairs is planned so the work is done in one trip where possible. Photos, approximate widths and what uses the floor help us bring the right materials.
We stand by our work: 12 months, guaranteed. It covers how we prepared and applied the sealant, and we come back if anything isn’t right.
- Place
- Riverside of Blairs (AB12)
- Wider area
- Aberdeenshire
- Guarantee
- 12 months on our workmanship
- Quote
- Quoted before any work starts
- Call
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Riverside of Blairs
More services for Riverside of Blairs
After the work
Every sealant joint needs some looking after, and how long they last depends on how they’re treated. Our advice:
- Check joints after long freezing spells
- Sweep decks, ramps and floors so grit doesn’t collect in the joints
- Keep scrapers and ploughs from dragging across joint sealant
- Note which joints were done, when, and with what
Add every elevation, deck and floor joint to your inspection round. Early splits and edges starting to lift show up on a routine check, when they’re still cheap to deal with. If anything looks wrong, call the office on 01277 525 020 or email drawings and photos with photos.
On a multi-storey car park, a failed joint usually shows up as a leak onto the deck underneath. Salty water dripping through stains soffits and lands on parked vehicles, which is bad news for the concrete and the people parking below. Sealing the joint promptly stops it at source.
Common questions from Riverside of Blairs clients
Is Riverside of Blairs off your patch?
No. Small places get the same service as large ones. Every Scottish council area is within our area. We plan jobs in smaller places so return trips are kept to a minimum.
Would you work within a site like Woodend Hospital?
Yes, provided the work is planned with the site’s estates team. Work is phased so departments keep running, under the site’s own rules.
How do I request a quote?
There are four steps: send details, receive a fixed quote, we carry out the work, and it’s guaranteed. The first step only needs photographs and a postcode.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
What timescale should we allow for resealing expansion joints?
It typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. We confirm the timescale with the quote, including any phasing.
What exactly is a movement joint?
It’s a deliberate gap that lets the structure move without cracking. Expansion joint is a name often used for the same thing, and either way it needs a sound seal.
Can you work to our specification?
Yes. We follow the specification, along with the manufacturer’s installation guidance, and any queries are raised before we start.
Owners, agents and contractors
As a CHAS accredited contractor and Constructionline member, we make supplier vetting simple. We’re fully insured, and our insurance certificate can go with the quote.
Housing associations and managing agents often need work done across blocks and communal areas. Work can be phased so residents and staff keep access throughout, and each stage is agreed with your contact.
How a job runs
Occupied buildings need a little choreography. The work area is signed and kept contained, keep walkways clear and work section by section so the rest of the building stays in use. Where we can, we combine work around Riverside of Blairs with other jobs nearby, to make the most of each trip. Tell us how flexible your dates are.
- We assess the joints on site or from photos, noting widths and how each has failed.
- You receive a fixed quote stating the product and the movement it is rated for.
- Where areas have to stay open, we agree a phased sequence before starting.
- The failed seal is cut out and both joint faces cleaned back to sound material.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
Getting the site ready
- Make sure the joints can be reached
- Tell us your opening times and when work is allowed
- Point out parking and an unloading spot
Ask for a quote
Let us know the site, the scope and your timescale, and a fixed quote will follow. The easiest way is to call 01277 525 020 or email a schedule or drawings.
Related advice
Slabs, ramps and loading bays in Riverside of Blairs
The east of Scotland, where Riverside of Blairs is, gets less rain than the west. Freezing weather and salt still attack open external joints. Resealing before the cold months helps protect the edges.
Schools like Cults Academy often have long brick elevations with movement joints that age quietly. Campuses like Robert Gordon University, 2.7 miles to the north-east of Riverside of Blairs, mix old and new buildings, with movement joints wherever they meet. For an estate such as Woodend Hospital, 3.5 miles to the north of Riverside of Blairs, the joints in ramps, decks and long building elevations all need attention over time.
Riverside of Blairs is about 5 miles south-west of Aberdeen, in Aberdeenshire. We send applicators to Riverside of Blairs for movement joints, handled exactly as we handle every other area. 179 places across Aberdeenshire fall within our area, Riverside of Blairs among them.
Commercial sites across AB12 are covered. Streets here include Dee View and Menzies Park. We also cover Bieldside (1 mile north), Milltimber (1 mile north-west), Peterculter (2 miles west), Countesswells (3 miles north) and Kingswells (4 miles north). Bigger towns within reach include Inverurie (15 miles north-west), Westhill (5 miles north-west), Stonehaven (9 miles south), Banchory (11 miles west), Portlethen (4 miles south-east) and Garioch (14 miles north-west).
Around Riverside of Blairs
In Riverside of Blairs, that means premises near The Den and the Glen. Riverside of Blairs’s nearest station is Portlethen station, about 3.9 miles south-east. Well-known places in the area include Woodend Hospital (3.5 miles north) and Blairs College (under half a mile east). Not far away are Murtle Dam and Beans Hill.
Site staff or a sealant specialist?
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
A short, simple internal joint is often within reach of a maintenance team. The usual problems come from preparation: sealing over old material, sealing onto damp or dusty surfaces, or a product that can’t take the movement.
What we can’t put right
Sealant solves a lot, but not everything, and we’d rather tell you before you spend money. It won’t fix:
- Movement on a scale no sealant is meant to absorb
- Mechanical expansion joint covers, cover plates or proprietary joint systems (a specialist supplier’s job)
- Leaks coming from the membrane rather than the joint seal
If in doubt, ring 01277 525 020 or email drawings and photos and we will say what we think before you book.
Joints and surfaces we work on
- Car park decks and ramps
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
- Precast concrete panel joints
- Brickwork movement joints