Expansion and movement joint sealing in Preston, Kent
Expansion joint sealing in Preston, backed by over 20 years in commercial sealing. Fully insured and CHAS accredited.
- Arrises breaking up along floor joints
- Hardened, cracked sealant on exposed facades
- Rain penetration at brick or block movement joints
Expansion joint sealing for businesses in Preston
Photos, a specification or a quick description of the joints is enough to start a fixed quote.
How we handle expansion joint sealing in Preston
If you need expansion joint sealing in Preston, start with photographs and joint lengths. We will come and look where photos don’t show enough, then send a fixed quote that names the sealant. To discuss the joints first, call 01277 525 020 or email us. If you are dealing with water getting into the wall through a failed joint and movement joints with split or torn sealant, we can help. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Preston, preparation and product choice get the time they need.
Halls, schools and small commercial buildings near places like Preston have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
Whoever the client is, the cover is the same: a 12-month guarantee on our workmanship. It doesn’t extend to damage, faults in the building or work by others, and we’re upfront about that.
- Location
- Preston (CT3)
- Region
- Kent
- Guarantee
- A 12-month guarantee
- Price
- Quoted before any work starts
- Telephone
- 01277 525 020
- Last updated
- 3 November 2026
Why act early in Preston
Re-sealing with the same product that failed is often a false economy. If the joint is too narrow or the product wrong for the movement, it needs a different approach. For buildings around smaller places like Preston, water damage can go unnoticed for longer, especially where a building isn’t used daily, which gives a failed joint time to do damage. Renewing joints in good time avoids the problem.
Larger quantities, tricky access or phasing all shape the price. So do site requirements such as inductions and permits.
What you get with us
- Colour agreed before work starts
- Constructionline member
- One number for every site we cover
- A fixed quote before work starts
Take a look at our cost guide or how we’re accredited.
FAQs: Preston
Is Preston too far out for you?
No. Places such as Preston are covered as much as the big towns. Our area covers London and the South East counties. We plan jobs in smaller places so return trips are kept to a minimum.
Would you work within a site like St Martins Hospital?
Yes. Healthcare sites are among the places we work. We follow the site’s permits, sign-in and infection-control procedures in every area.
What about RAMS and site documents?
Each site asks for different documents, so tell us what you need and we’ll confirm it when we quote.
What sealant do you use in movement joints?
We choose a sealant with a movement capability that suits the joint, classified under BS EN ISO 11600. Where two different materials meet, a hybrid sealant can be the better choice.
Do you work to architects’ specifications?
Yes. We follow the specification, along with the manufacturer’s installation guidance.
How do you deal with asbestos in old sealant?
Some older mastics, especially in pre-2000 buildings, can contain asbestos. We check the asbestos register before cutting out old sealant in an older building, and if asbestos is suspected, work stops until it’s tested. Removing asbestos is a job for asbestos specialists, not us.
How long does movement joint sealing take?
It typically takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing. Timings are set out in the quote, including any phasing.
Surface by surface
Car park decks and ramps
Water coming through deck joints is the usual first sign. We strip the old seal, prepare the edges and seal again.
Internal floor movement joints
Warehouse and retail floors have saw-cut induced joints and construction joints. Trafficked floor joints often get a semi-rigid filler.
What we can’t put right
We check first that sealant really is the fix. It won’t put right:
- Proprietary pre-formed expansion joint systems
- Structural movement beyond what the joints were designed for (that needs a structural engineer)
- Crumbling edges that would give a new bead nothing sound to grip
Not sure which it is? You can ring 01277 525 020 or send details through our quote form and we’ll tell you honestly.
Where we work in Preston
- Precast concrete panel joints
- Brickwork movement joints
- Car park decks and ramps
- Blockwork control joints
- Cladding panel joints
- Podiums and floor movement joints
From enquiry to sign-off
Diagnose, treat, sign off: that’s the shape of every visit. First comes an inspection and agreement on scope, then we prepare and seal each joint with the specified product, and we finish with a walk round so the work can be signed off. If others near Preston need work, visits can be combined. You’ll have a fixed quote before work starts.
- First the joints are inspected, widths measured and the type of failure noted.
- A fixed quote names the sealant we propose and its movement class.
- Where areas have to stay open, we agree a phased sequence before starting.
- We strip the old sealant or filler and prepare each face until it’s sound and dry.
- Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
- Finished joints are inspected, the cure time confirmed and the 12-month guarantee applies.
What we need from you
- Tell us your opening times and when work is allowed
- Point out parking and an unloading spot
- Warn occupants and staff about the work
Get a fixed quote
To get a fixed quote, speak to us on 01277 525 020 or email drawings and photos, telling us the site location and the nature of the job. Our quote form is another easy route.
Related advice
How the quote is worked out
Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:
- Whether the work must be split into stages
- How accessible the joints are
- How much existing material needs removing
- Site requirements such as inductions and permits
The specified product makes a difference, and so does the preparation, from cutting out to priming and backing rod. Access, phasing and site rules also count.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- The type of building and who uses it
- Drawings or a marked-up plan, if available
- Photos of the joints, close up and from further back
- Asbestos survey details if the building is older
If there’s a specification, drawings or a tender package, send it with your enquiry, and we will price against exactly what is specified. For smaller jobs, photos and a description will do.
When to bring in a specialist
Certain joints really need a specialist: fire-rated seals that must follow a tested detail, trafficked floor joints and external movement joints among them. Getting these wrong typically costs more in the end than doing them right.
A short, simple internal joint is often within reach of a maintenance team. Where it goes wrong is preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
Expansion joint sealing in Preston: the local picture
Preston is in the South East, one of the UK’s drier regions. External joints still wait for dry conditions, and where de-icing salt is spread in winter, open joints let it in. At about 59 miles from central London, Preston is within reach of the capital. The roads out of London are lined with trade parks and distribution sheds.
Large sites such as St Martins Hospital (5.3 miles west of Preston) have car parks, service roads and long elevations with movement joints in brick and panels. Schools like Preston Primary School often have long brick elevations with movement joints that age quietly. Phasing is what makes joint work possible on busy sites such as Canterbury Industrial Park (2.4 miles north-west of Preston): one bay, aisle or car park row at a time.
Preston is about 6 miles south-east of Herne Bay, in Kent. Our applicators travel to Preston for work on movement joints, handled exactly as we handle every other area. Across Kent, 931 places are covered, including Preston. We also cover London, around 59 miles from Preston.
Commercial sites across CT3 are covered. Among the streets we cover are The Street, The Forstal and Park Lane. Nearby places we also cover include Grove (1 mile north-west), West Stourmouth (1 mile north), East Stourmouth (1 mile north-east), Upstreet (2 miles north-west) and Ware (2 miles east). Bigger towns within reach include Canterbury (6 miles west), Margate (9 miles north-east), Dover (12 miles south), Folkestone (15 miles south), Ramsgate (8 miles east) and Broadstairs (10 miles north-east).
Landmarks near Preston
Locally, jobs take us to sites close to Grove Ferry Picnic Area. The nearest railway station is Adisham station, roughly 4.3 miles south. Well-known places in the area include St Martins Hospital (5.3 miles west). For a walk, there’s Monk's Wall nature reserve.