Expansion joint sealing in Nursted
We carry out expansion and movement joint sealing in walls, decks and floors in Nursted. Send photos or drawings for a fixed quote.
- Water getting into the wall through a failed joint
- Arrises breaking up along floor joints
- Joints packed with grit and debris
Expansion joint sealing across Nursted
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
When something else is needed
Part of a good diagnosis is knowing where sealant stops. You will hear from us if the cause turns out to be one of these:
- Cracking or settlement that calls for an engineer’s assessment
- Broken or spalled joint edges, which need repairing before any sealant goes in
- Changing the joint layout or spacing of a structure
Not sure which it is? You can speak to us on 01277 525 020 or email drawings and photos and we will tell you honestly.
What we seal
- Precast concrete panel joints
- Car park decks and ramps
- Brickwork movement joints
- Blockwork control joints
- Podiums and floor movement joints
- Cladding panel joints
How we handle expansion joint sealing in Nursted
Our movement joint work takes in walls, panels, decks and floors: vertical joints in brick and block facades, joints between precast or cladding panels, concrete slab and deck joints, ramps, podiums and internal floors. Every one calls for a sealant picked for its movement, exposure and traffic and we name it in the quote. Most enquiries involve chipped joint edges on forklift routes and water dripping through deck or ramp joints, across brickwork movement joints, car park decks and ramps and cladding panel joints. One point of contact handles commercial sealant work in Nursted from the first photos to the final walk-round, for single jobs and planned programmes alike.
Around smaller places such as Nursted, floor joints are often in barns and farm buildings turned into workshops, stores and offices. Joints in those slabs take vehicles, trolleys and foot traffic, and need a filler or sealant to match.
Our workmanship is guaranteed for 12 months. If a joint we sealed fails because of how it was installed, we come back and put it right.
- Location
- Nursted (GU31)
- Wider area
- Hampshire
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Phone
- 01277 525 020
- Updated
- 3 November 2026
Nearby places to Nursted
More services for Nursted
Surface by surface
Joints between different materials
Some mixed-material joints suit a hybrid sealant. We pick the product for the materials and the movement.
Internal floor movement joints
Forklift and pallet-truck wheels break unsupported joint edges. The right filler or sealant for the traffic and movement protects them.
Common questions from Nursted clients
Is a smaller place like Nursted outside your area?
No. Places such as Nursted are covered as much as the big towns. London and every South East county are within our area. Where we can, we group nearby jobs to make the most of each trip.
Do you cover business parks and estates near Nursted, such as Upper Adhurst Industrial Park?
Yes. We cover Nursted and the area around it, including industrial estates, business parks and retail parks such as Upper Adhurst Industrial Park. Send details of the unit and the work through our quote form for a quick quote.
Do you use silicone or polyurethane in movement joints?
We choose a sealant with a movement capability that suits the joint. Hybrid or MS polymer products suit some mixed-material joints.
Do you seal on top of existing sealant?
No. We cut the old material out and clean the joint back before sealing, since fresh sealant will not bond reliably to aged material.
How soon can the area be used again?
Curing time varies by product, and we confirm it on the day, and sign any area that should be left alone.
What exactly is a movement joint?
It’s a deliberate gap that lets the structure move without cracking. Many people call it an expansion joint.
What guarantee do you give on joint sealing?
The 12-month guarantee applies to the workmanship. Tell us straight away if a joint we sealed gives trouble in that time.
Leave it or put it right?
On a car park, resealing joints in phases keeps the deck open. Phased work by bay or zone lets the rest stay in use without shutting the whole car park. Tell us what has to stay open and we’ll plan around it. For buildings around smaller places like Nursted, water damage can go unnoticed for longer, especially where a building isn’t used daily, so a failed joint can leak for a while before anyone sees it. Renewing joints in good time avoids the problem.
Larger quantities, tricky access or phasing all shape the price. Site requirements like inductions and permits play a part as well, along with the time of year for external work.
Why appoint us
- Commercial sealant work since 2005
- A Constructionline member, so easy to vet
- One contact handling all your sites
- Failed material removed, not covered up
Read our cost guide or how we’re accredited.
When to bring in a specialist
For a quick touch-up, site staff may be fine, but larger jobs are different: a specialist brings efficiency, a consistent finish and a 12-month guarantee.
The visible bead is only part of the job. Correct depth, the right primer and a sealant matched to the movement are easy to get wrong without experience.
Owners, agents and contractors
Building owners and managing agents use us on sealant work across single buildings or whole portfolios. One quote can cover more than one site, which keeps the paperwork simple.
We take on planned maintenance as well as one-off repairs: working through a building or an estate in stages that fit your budget. Nursted can form part of a wider programme across Hampshire.
Floors, slabs and movement joints in Nursted
At about 50 miles from central London, Nursted is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital, and their floor joints take forklift and pallet-truck traffic all day. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and gritting in cold spells finds its way into open joints.
If you manage units on an estate such as Upper Adhurst Industrial Park, which lies north of Nursted, the floor joints under forklifts and pallet trucks and the slab joints in the yard are the ones to watch. Schools such as The Petersfield School have movement joints in their walls and floors that are easy to overlook. Sites like Petersfield Hospital (1.7 miles north-west of Nursted) carry ambulances, deliveries and visitors’ cars over their road and deck joints.
Nursted is about 2 miles south-east of Petersfield, in Hampshire. We cover commercial sites throughout Nursted, for single jobs and planned programmes alike. Across Hampshire, 723 places are covered, including Nursted. We also cover Portsmouth, some 14 miles away.
Business premises anywhere in GU31 are within our area. Nearby places we also cover include Buriton (2 miles west), Weston (2 miles west), Ramsdean (3 miles west), Chalton (4 miles south-west) and West Marden (5 miles south) for movement joints. A short drive away, we cover Havant (9 miles south), Fareham (15 miles south-west), Horndean (7 miles south-west), Alton (12 miles north), Waterlooville (9 miles south-west) and Purbrook (10 miles south-west).
Near you in Nursted
The nearest railway station is Petersfield station, about 1.8 miles north-west. Other landmarks nearby include Clanfield Earthwork (3.8 miles south-west) and Petersfield Community Hospital (1.7 miles north-west). Open spaces near Nursted include Oakham Hill and Liss Riverside Railway Walk South.
From enquiry to sign-off
Tell us your site hours and access windows and we’ll plan around them. On the day, the work area is kept contained and tidy, and we check in with your contact before moving on to each new area. For a building around Nursted, tell us how to find it and who will meet us. Send that with the details and we’ll confirm the plan with the quote.
- We look at the joints, their width and how they’ve failed.
- A fixed quote follows, naming the sealant and its movement class.
- Old sealant and filler are cut out and the joint faces cleaned back to sound material.
- Closed-cell backing rod is set to depth, or bond-breaker tape in shallow joints.
- After any primer the maker requires, the bead is applied and tooled so it grips two sides only.
- Finished joints are checked and backed by our 12-month guarantee.
Before we start on site
- Make sure the joints can be reached
- Tell us what induction or permit system the site runs
- Agree which areas must stay open
Ask for a quote
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. For a chat about it beforehand, call the office on 01277 525 020 or send details through our quote form.