Expansion joint sealing in Buriton
Expansion and movement joint sealing in walls, decks and floors across Buriton, by CSCS-carded applicators. CHAS accredited and fully insured.
- Joints packed with grit and debris
- Joints where the bead has lost adhesion
- Torn sealant in brick or block movement joints
Expansion joint sealing in Buriton
Send drawings, photos or a joint schedule, or tell us about the site, and we’ll come back with a fixed quote.
About our expansion joint sealing in Buriton
Joints in car park decks and ramps are among the hardest-working in any building. Tyres load the edges, and de-icing salts and water work into any gap; water dripping through to the deck below is often the first sign. A sealant suited to traffic and the expected movement goes in and the work can be phased so parts of the car park stay open. We work on podiums and floor movement joints, blockwork control joints and precast concrete panel joints, and the usual reasons a site gets in touch are movement joints with split or torn sealant and previous reseals laid over old sealant. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: on jobs in Buriton, preparation and product choice get the time they need.
Halls, schools and small commercial buildings near places like Buriton have movement joints in brick, block and concrete too. They’re easily forgotten until water gets in or an edge breaks.
Building owners and contractors get the same cover: a 12-month guarantee on our workmanship. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Place
- Buriton (GU31)
- Region
- Hampshire
- Cover
- 12 months on every job
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Questions we’re asked in Buriton
Is Buriton off your patch?
Not at all. Buriton is within our area. We cover Greater London and the counties of the South East. Send photographs and a list of what needs doing, and we’ll plan the job to need as few trips as possible.
Is hospital work, at somewhere like Petersfield Hospital, something you do?
Yes, provided the work is planned with the site’s estates team. We follow the site’s permits, sign-in and infection-control procedures in every area.
Do you take on multi-site work?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout across South East England, Greater London and Scotland.
How do we ask for a quote?
There are four steps: send details, get a quote, we seal, guaranteed. Step one needs little more than photos and a postcode.
Can you send site paperwork?
Each site asks for different documents, so list what you need, whether RAMS, insurance or CSCS details, and we’ll confirm with the quote.
What if there’s asbestos in the old mastic?
Asbestos is possible in some older mastics, particularly in buildings from before 2000. We check the asbestos register before cutting out old sealant in an older building, and work stops until any suspect material has been tested. We don’t remove asbestos-containing materials.
Do the joint edges need to be sound before sealing?
The edges have to be sound. Where they’ve broken up, we will tell you they need repairing first.
For managing agents and facilities managers
Housing associations and managing agents often need work done across blocks and communal areas. We phase the work so people keep access, with each stage agreed with your site contact.
Planned maintenance programmes are welcome: resealing failed joints building by building, on a schedule that suits your budget. Buriton can form part of a wider programme.
Signs you need expansion joint sealing in Buriton
Sealant peeling cleanly off one side is an adhesion failure. Dusty, damp or contaminated faces, a missing primer and three-sided adhesion are the usual causes, and it’s common on joints sealed in a hurry.
Most enquiries start with something like this:
- Damp inside where a wall movement joint has failed
- Chipped joint edges on forklift routes
- Joints where the bead has lost adhesion
- Water dripping through deck or ramp joints
Schools such as Buriton Primary School have movement joints in their walls and floors that are easy to overlook.
Before you book anyone
- The terms of the workmanship guarantee
- Proof of insurance
- Whether old or failed sealant will be cut out, not overlaid
- Whether their applicators hold CSCS cards
Where floor joints take the most wear near Buriton
At about 52 miles from central London, Buriton is within reach of the capital. Distribution warehouses and industrial estates are common around the motorway corridors that serve the capital. Buriton is in the South East, one of the UK’s drier regions. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.
For an estate such as Petersfield Hospital, 1.9 miles to the north of Buriton, the joints in ramps, decks and long building elevations all need attention over time.
Buriton is about 2 miles south of Petersfield, in Hampshire. We send applicators to Buriton for movement joints, handled exactly as we handle every other area. 723 places across Hampshire fall within our area, Buriton among them. We also cover Portsmouth, around 13 miles from Buriton.
We cover the GU31 postcode districts. For a building on High Street, Heatherfield and Petersfield Road or nearby, we can quote for movement joints. Just outside Buriton, we also work in Weston (1 mile north-west), Nursted (2 miles east), Ramsdean (2 miles north-west), Chalton (3 miles south) and Blendworth (4 miles south). Nearby towns on our patch include Gosport (15 miles south-west), Havant (8 miles south), Fareham (14 miles south-west), Horndean (5 miles south-west), Alton (12 miles north) and Waterlooville (7 miles south-west).
Local landmarks in Buriton
Locally, jobs take us to sites close to The Nest pub, The Petersfield School and Ditcham Park and the streets around them. For rail, the closest station is Petersfield station, roughly 2.1 miles north. Other landmarks nearby include Bear Museum (1.8 miles north) and Petersfield Community Hospital (1.9 miles north). For a walk, there’s Head Down.
Cost factors for movement joints
We price every job individually. The main factors are:
- Whether the work must be split into stages
- How accessible the joints are
- The total length or number of joints
- Travel to remote or island sites
Pricing movement joints depends on quantities, condition and access, and any specification that applies. Ask us for a fixed quote.
Sending details for a quote
The more we know, the firmer the quote. Helpful details to send:
- The postcode of the building
- How the joints are reached, and at what height
- Any specification or named product
- Drawings or a marked-up plan, if available
Pricing a project or setting a maintenance budget? We’ll quote against your scope and drawings you can plan around. If you have questions first, call the office on 01277 525 020 or send photos by email.
On site: what to expect
Where the site stays busy, the work is phased so only one area is out of use at a time. Each area is protected, prepared and sealed, then handed back before the next one starts. If others near Buriton need work, visits can be combined. A fixed quote is given before anything starts.
- Photos, joint lengths and drawings come to us, or we visit.
- We compare each joint’s width with the movement and the sealant’s capability.
- Old sealant and debris are cut out of every joint.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Each area is handed back after its cure time, under our 12-month guarantee.
Getting the site ready
- Let building users know which areas are affected
- Tell us what induction or permit system the site runs
- Send your site hours and access windows
Get a fixed quote
Specifications, drawings and tender packages are welcome with any enquiry, and we’ll price against exactly what is specified. Smaller jobs need nothing more than photographs and a few notes.
Read more
Maintenance after handover
Every sealant joint needs some looking after, and their life depends on movement, exposure, cleaning and use. We suggest:
- Act on the first tear or lifting edge rather than waiting
- Inspect movement joints alongside other routine building checks
- Keep scrapers and ploughs from dragging across joint sealant
- Look over external and deck joints after a hard winter
Fresh joint sealant needs its full cure time before it takes traffic or water. The time varies with product, conditions and joint depth and we’ll tell you when each bay or area can reopen. Barriers left in place until then protect the finish.
A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it, which is bad news for the concrete and the people parking below. Sealing the joint promptly stops it at source.
Also near Buriton
Other services in Buriton
Should maintenance staff do it?
For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.