Expansion Joint Sealing in Murston
Sealant work in Murston for main contractors, managing agents and facilities managers: expansion and movement joint sealing in walls, decks and floors, with a fixed quote first.
- Hardened, cracked sealant on exposed facades
- Joints where the bead has lost adhesion
- Movement joints with split or torn sealant
Expansion joint sealing in Murston
Share the site address and what’s failing, and we’ll reply with a fixed quote or arrange a visit.
Expansion joint sealing in Murston
Our movement joint work takes in walls, panels, decks and floors: brickwork and blockwork joints, precast and cladding panel joints, concrete joints, car park decks and ramps, podiums and floor movement joints. The product depends on the movement, the weather and anything that runs over it and we name it in the quote. If you have arrises breaking up along floor joints and sealant pulling off the joint face, we can put it right, whatever the surface. Most enquiries from Murston start with one failed joint and grow into a wider look at the building: we check the joints around it and give you an honest view of what needs doing now and what can wait.
Around places the size of Murston, joints that need sealing tend to be in rural business units, farm buildings put to commercial use, schools and community buildings. Concrete floors and yards in these buildings move and crack like any others.
The 12-month guarantee is for workmanship rather than wear and tear. How long a sealant joint lasts depends on movement, exposure, cleaning and use, so we spell out the cover before we begin.
- Where
- Murston (ME10, ME9)
- Region
- Kent
- Guarantee
- 12 months on every job
- Quote
- A fixed quote before we start
- Call
- 01277 525 020
- Last updated
- 3 November 2026
Common questions from Murston clients
Is Murston off your patch?
Not at all: smaller places are covered as well as towns. We work across Greater London and the South East. Good photos up front let us bring everything on the first visit.
Does the sea air around Murston change the choice of sealant?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
What timescale should we allow for resealing expansion joints?
The metres of joint, the access and the amount of removal decide it. As a guide, it normally takes a few hours to several weeks, depending on how many metres of joint there are and how much old sealant or filler needs removing.
Who decides which product is used?
A specification, where there is one, decides it. If there isn’t one, it comes down to the joint: how much it moves, what it bonds to and whether it’s wet, trafficked or fire-rated.
Can you seal joints in cold or wet weather?
Weather matters for any external joint: rain, frost and condensation all stop sealant bonding. Indoor joints can normally carry on regardless.
Will you come and look before quoting?
Photos, drawings or a schedule are often enough to quote. Where they aren’t, we arrange a site visit.
What causes movement joint sealant to fail?
It depends on how the sealant has let go: a split through the middle points to over-stretching, while peeling from one face points to preparation or primer. Sometimes the edge material itself has failed.
Towns and villages near Murston
Also in Murston
Surface by surface
Cladding panel joints
We confirm what access is in place before pricing. Close-up photos help us judge the joints.
Brickwork and blockwork joints
A brick movement joint full of old mortar or debris can’t close. Everything is raked out before backing and sealant go in.
Traffic, movement and joints around Murston
The sea is no more than about 2 miles from Murston. Open joints in coastal car parks and yards let in salt-laden water as well as grit, so it pays to keep them sealed. The South East is one of the drier parts of the UK. External slab and deck joints still need a dry, clean joint to seal, and winter de-icing salt on car parks and ramps works into any open joint.
Business parks such as Kent Science Park, 2.3 miles south-west of Murston, have car parks, paved areas and long brick and panel elevations, all with movement joints. For an estate such as Sittingbourne Memorial Hospital (0.8 miles south-west of Murston), the joints in ramps, decks and long building elevations all need attention over time.
Murston is about 1 mile east of Sittingbourne, in Kent. Across the ME10 postcode area, it works the same way: send details, get a fixed quote, we seal, and the work is guaranteed. Across Kent, 931 places are covered, Murston among them. There’s a separate page for London, about 38 miles away.
Anyone looking for expansion joint sealing in ME10 and ME9 gets the same process as the rest of our area: send details, get a quote, we seal, guaranteed. We cover commercial and managed buildings on Oak Road, Glebe Lane and Leigh Road. Just outside Murston, we also work in Milton Regis (1 mile north), Sittingbourne (1 mile west), Tonge Corner (1 mile east), Rodmersham (1 mile south) and Kemsley (1 mile north). Further afield, our area takes in Maidstone (11 miles south-west), Ashford (15 miles south), Canterbury (15 miles east), Whitstable (12 miles east), Faversham (6 miles east) and Minster (6 miles north).
Around Murston
Locally, jobs take us to sites close to Sittingbourne Community College, Milton Creek Country Park and The New Inn. The closest station to Murston is Sittingbourne station, roughly 0.7 miles west. Other landmarks nearby include Sittingbourne Heritage Museum (less than half a mile west) and Bayford Court (less than half a mile west).
Honest limits
Our job is the joint, not everything around it. Sealant alone won’t deal with:
- Cracking or settlement that calls for an engineer’s assessment
- Crumbling edges that would give a new bead nothing sound to grip
- Waterproofing layers buried beneath the sealant
Not sure which it is? You can ring 01277 525 020 or use the quote form and we will tell you honestly before you book.
Where we work in Murston
- Podiums and floor movement joints
- Precast concrete panel joints
- Car park decks and ramps
- Cladding panel joints
- Blockwork control joints
- Brickwork movement joints
For managing agents and facilities managers
Hotels, schools, healthcare sites, offices and retail units come to us directly as well. We plan around the way the building is used, so guests, pupils, patients or staff are disturbed as little as possible.
For main contractors, we work as the sealant subcontractor, on new build and refurbishment alike. We work to your programme, your specification and your site rules.
When to bring in a specialist
For most general trades, sealant is a sideline. A specialist prepares properly, controls joint depth and picks a product with the right movement class.
Site maintenance staff can often handle a short internal joint. The usual problems come from preparation: new sealant over old, damp or dusty faces, or the wrong product for the movement.
When to call us in Murston
Three-sided adhesion is a common cause of early failure. Bonded on three faces, it can’t stretch evenly when the joint opens so backing is set before sealing.
Look out for the following:
- Joints packed with grit and debris
- Arrises breaking up along floor joints
- Hardened, cracked sealant on exposed facades
- Sealant peeling off one face of the joint
Schools like Sunny Bank Primary School often have long brick elevations with movement joints that age quietly.
What to look for in a quote
- Is the sealant right for the movement and the substrate?
- How they’ll work around occupants
- How long is the guarantee, and what does it include?
- What site paperwork they can supply
Our process
The first thing on site is a walk round with your contact, agreeing which joints are in scope, where to start and what must stay open. After that, any old or failed material is removed, each joint is prepared and the new sealant goes in. What matters most for a job in Murston is a clear list of what needs doing, so send photos of each area. You will then get a fixed price for the work.
- The first job is to check each joint: how wide it is, how it moves and why the old seal let go.
- Next, we fix a price and confirm the sealant we propose for the movement.
- We strip out the old seal and prepare the faces, flagging any broken edges that need repair before sealing.
- Backing rod goes in at the right depth, or bond-breaker tape where the joint is shallow.
- Where the maker calls for primer, it’s applied first, then the bead goes in and is tooled to a concave finish.
- Finished joints are checked and backed by our 12-month guarantee.
What we need from you
- Send your site hours and access windows
- Confirm the product named in the specification
- Tell us what induction or permit system the site runs
Ask for a quote
Specifications, drawings and tender packages are welcome with any enquiry, and we will price the work to it. For smaller jobs, photos and a description will do.