The Mastic Doctor team standing beside their branded vans outside an office building
Hampshire · England

Expansion and movement joint sealing in Meonstoke, Hampshire

Expansion joint sealing for Meonstoke, from a contractor working since 2005. Fully insured, with a 12-month guarantee.

  • Spalled or broken joint edges in floors and decks
  • New sealant over old, now failing
  • Debris jammed in movement joints
1
Send details
Photos, drawings or a schedule, or we visit.
2
Get a quote
A fixed price, with what’s included set out clearly.
3
We seal
Failed joints cut out, faces prepared, new sealant laid.
4
Guaranteed
Backed by a 12-month workmanship guarantee.
London, the South East & Scotland
CHAS accredited
£5m PL insurance

Expansion joint sealing across Meonstoke

Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.

Expansion joint sealing in Meonstoke

Internal floor joints take trolleys, pallet trucks and forklifts. Unsupported edges break up under wheels, so the right filler or sealant for the traffic and movement matters. If the arrises are already broken, we will say so before sealing, and phased work keeps areas in use. We work on precast concrete panel joints, cladding panel joints and car park decks and ramps, and the failures we are asked to look at most are weathered movement joint sealant that no longer flexes and damp inside where a wall movement joint has failed. Sealant applicators who only do sealant are a different proposition from a general trade with a gun in the van: in Meonstoke, that means joint design, primers and backing rod as standard.

For a site near Meonstoke, measurements and photographs up front mean one trip where possible. Tell us the joint widths if you can, and what drives or walks over them.

The 12-month guarantee covers our workmanship: the preparation, the sealing and the tooling. It doesn’t extend to damage, other trades’ later work or movement the joint was never designed to take.

Place
Meonstoke (SO32)
Wider area
Hampshire
Cover
12 months on every job
Price
Quoted before any work starts
Phone
01277 525 020
Last updated
3 November 2026
Mastic Doctor team members lined up next to their branded vans outside an office building

Your questions answered

Which documents can you supply for work in Meonstoke?

RAMS, insurance certificate, CSCS details: list what the site needs and we will confirm it with the quote. Our applicators are CSCS-carded, and we carry £5m public liability insurance.

Is a smaller place like Meonstoke outside your area?

No. Places such as Meonstoke are covered as much as the big towns. We cover Greater London and the counties of the South East. We plan jobs in smaller places so return trips are kept to a minimum.

What if there’s asbestos in the old mastic?

The duty to manage asbestos sits with the building’s dutyholder, so for older buildings we ask for the asbestos register first. If anything suspect turns up, we stop until it’s tested.

Are you fully insured?

Yes. We’re fully insured, and the certificate can go with your quote.

Can you quote from photographs?

Many jobs can be quoted from photos, drawings or a joint schedule. Where they aren’t, we arrange a site visit before quoting.

How do we ask for a quote?

It works in four steps: send details, get a quote, we seal, guaranteed. The first step only needs photos and a postcode.

Do you reseal car park expansion joints?

Yes. Let us know the opening hours and which levels or bays have to stay available.

Diagnose, treat, sign off

Occupied buildings need a little choreography. The work area is signed and kept contained, with routes through the building left open and work section by section so the rest of the building stays in use. For a building around Meonstoke, tell us how to find it and who will meet us. Add it to your enquiry and we’ll build it into the plan.

  1. We assess the joints on site or from photos, noting widths and how each has failed.
  2. A fixed quote names the sealant we propose and its movement class.
  3. Phasing is agreed so decks, floors or entrances can stay in use where needed.
  4. We strip the old sealant or filler and prepare each face until it’s sound and dry.
  5. Depth is controlled with backing, the faces are primed where the maker calls for it, then the bead is laid and tooled.
  6. We check each joint with you, confirm the cure time and sign off under our 12-month guarantee.

Preparing the site

  • Make sure the joints can be reached
  • Tell us what induction or permit system the site runs
  • Agree which areas must stay open

Ask for a quote

Need a figure for a tender or a budget? Send the scope and any drawings, and we will return a fixed quote that you can work with. For a chat about it beforehand, give us a call on 01277 525 020 or send photos by email.

Ask for a quote

Related advice

Where floor joints take the most wear near Meonstoke

Meonstoke sits in one of the drier corners of the country, the South East. Even so, yard and car park joints are only sealed when they’re dry and clean, and winter de-icing salt on car parks and ramps works into any open joint. Central London is about 57 miles from Meonstoke. The roads out of London are lined with trade parks and distribution sheds, and their floor joints take forklift and pallet-truck traffic all day.

Around Meonstoke, each joint gets a filler or sealant matched to what crosses it and how much it moves.

Meonstoke is about 7 miles north-west of Horndean, in Hampshire. Businesses, contractors and managing agents in Meonstoke can call on us for movement joints. Meonstoke is one of 723 places we cover in Hampshire. For work in that direction, see our Southampton page.

We cover the SO32 postcode districts. Among the streets we cover are High Street, Oxendown and Fry's Lane. Just outside Meonstoke, we also work in Corhampton (1 mile north), Exton (1 mile north), Brockbridge (1 mile south-west), Droxford (1 mile south-west) and Soberton (2 miles south). A short drive away, we cover Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (10 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).

Landmarks near Meonstoke

We work on buildings around The Bucks Head pub, among other places. For a walk, there’s Beacon Hill and St Clair's Meadow.

Map of Meonstoke © OpenStreetMap contributors

Aftercare for building managers

Keep the joints in good shape with a few simple steps:

  • Include every elevation and deck joint in periodic inspections
  • Report split or peeling joint sealant early
  • Leave barriers in place until fresh joint sealant has cured
  • Plan racking layouts so feet don’t land on a joint

Floor joints on main traffic routes need watching more closely than the rest. Avoid standing heavy loads or racking legs on the joints.

A failed deck joint lets water straight through to the level below. That water often carries de-icing salts with it, which is bad news for the concrete and the people parking below. Sealing the joint promptly stops it at source.

What we can’t put right

Part of a good diagnosis is knowing where sealant stops. We’ll tell you if the real problem is any of the following:

  • Proprietary pre-formed expansion joint systems
  • Movement on a scale no sealant is meant to absorb
  • Joints too narrow for the movement, which need redesigning by the engineer

Not sure which it is? You can call 01277 525 020 or send photos by email and we will tell you honestly.

Where we work in Meonstoke

  • Brickwork movement joints
  • Podiums and floor movement joints
  • Blockwork control joints
  • Cladding panel joints
  • Precast concrete panel joints
  • Car park decks and ramps

When to call us in Meonstoke

Weathering wears down sealant on exposed elevations and decks. UV hardens the surface, and the sealant loses its ability to stretch and opens at the next temperature swing.

Typical triggers for a call:

  • Previous reseals laid over old sealant
  • Movement joints with split or torn sealant
  • Rain penetration at brick or block movement joints
  • Sealant peeling off one face of the joint

Schools like Meonstoke Church of England Infant School often have long brick elevations with movement joints that age quietly.

Questions to ask before you book

  • Are they CHAS accredited or on Constructionline?
  • How the existing material will be dealt with
  • Proof of insurance
  • Who will actually carry out the work

How to choose a sealant contractor

General trades versus a specialist

For a quick touch-up, site staff may be fine, but anything bigger is another matter: a specialist works through quantities efficiently, leaves a consistent finish and backs it with a 12-month guarantee.

Paperwork matters too. Main contractors and clients often ask for CSCS cards, RAMS and insurance details, and our CSCS-carded applicators are used to working under those rules.

Cost factors for movement joints

Sealant work doesn’t have a standard rate, since sites vary so much. What we look at:

  • Joint width, depth and condition
  • Induction, permit and paperwork requirements
  • Travel to remote or island sites
  • How much there is to seal

Access can matter as much as the joints themselves: joints within easy reach take less time than ones that need access equipment. Mention the access as part of your enquiry.

What to include in your enquiry

Whether it’s one area or a whole building, these details speed things up:

  • Approximate linear metres or a joint schedule
  • Whether an asbestos survey exists
  • Photos of the joints, close up and from further back
  • When you need the work done

A good quote starts with a clear picture: the joints involved, quantities, access and the product called for. Send what you have, and we’ll arrange a site visit if anything is unclear.

Accreditations

Trusted. Accredited. Insured.