Lyness expansion joint sealing
Expansion and movement joint sealing in walls, decks and floors throughout Lyness and nearby, carried out by CSCS-carded applicators. Fully insured and CHAS accredited.
- Damp inside where a wall movement joint has failed
- Expansion joints split through the centre of the bead
- Spalled or broken joint edges in floors and decks
Expansion joint sealing for businesses in Lyness
Tell us what needs sealing and where, with photos or drawings if you have them, and we’ll price it.
Signs you need expansion joint sealing in Lyness
The edges of the material can fail rather than the sealant. If the edge of the joint is friable, the bond fails with it so edge repair has to come before resealing.
If one of these sounds familiar, it’s time for a closer look:
- Expansion joints split through the centre of the bead
- Rain penetration at brick or block movement joints
- Joints where the bead has lost adhesion
- Joints packed with grit and debris
Around Lyness, each joint gets a filler or sealant matched to what crosses it and how much it moves.
What to look for in a quote
- Will CSCS-carded applicators be on site?
- How long is the guarantee, and what does it include?
- Do they follow the manufacturer’s priming guidance?
- Their pre-qualification and accreditations
Expansion joint sealing in Lyness
Internal floor joints take trolleys, pallet trucks and forklifts. Without a sound filler, joint edges chip and spall under load so the product has to suit both the traffic and the movement. We will tell you if the edges need repairing before sealing, and phased work keeps areas in use. If you have arrises breaking up along floor joints and sealant peeling off one face of the joint, we can help, on car park decks and ramps, blockwork control joints and podiums and floor movement joints alike. Most enquiries from Lyness start with one failed joint and grow into a wider look at the building: we look at the rest while we’re there and tell you what we find.
For outside joints near Lyness, the Scottish weather sets the timetable: sealant needs a dry joint and a temperature within its range, so dates have some give. Internal floors can be done whenever suits the site.
Building owners and contractors get the same cover: twelve months on the work we carried out. Faults in the structure, damage and other trades’ work fall outside it, and we say so plainly.
- Location
- Lyness (KW16)
- Region
- Orkney Islands
- Cover
- 12 months on our workmanship
- Price
- Quoted before any work starts
- Call
- 01277 525 020
- Page updated
- 3 November 2026
More services for Lyness
Keeping the joints sound
Sealant joints are maintenance items, and how long they last depends on how they’re treated. We suggest:
- Keep racking legs and heavy point loads off floor joints
- Inspect exposed joints once the cold weather has passed
- Brief car park operatives to protect joint lines during winter clearance
- Report split or peeling joint sealant early
Floor joints on main traffic routes need watching more closely than the rest. Avoid standing heavy loads or racking legs on the joints.
When one joint fails, others of the same age are rarely far behind. It pays to check every joint, not just the obvious one. We’ll tell you which movement joints need doing now and which can wait.
Work for main contractors and building owners
Facilities managers want contractors who arrive with the paperwork sorted. Tell us what site paperwork you need, such as RAMS, an insurance certificate or CSCS details, and we will confirm with the quote.
CHAS accredited and a Constructionline member, we make supplier vetting simple. Our insurance certificate can be sent along with the quote.
How the quote is worked out
To price the job, we consider:
- How much there is to seal
- How accessible the joints are
- Working within restricted access windows
- Which sealant the job calls for
Small jobs and large programmes are priced from the same things: scope, access, product and programme. Call for a quote and we’ll put a fixed figure on it.
What we need to price the job
We can often quote from photographs and a few details. Please tell us:
- How the joints are reached, and at what height
- Whether an asbestos survey exists
- Any specification or named product
- Drawings or a marked-up plan, if available
For a fixed quote, give us a call on 01277 525 020 or email a schedule or drawings. Our quote form is another easy route.
Our process
Where the site stays busy, the work is phased so only one area is out of use at a time. Each section is protected, cleaned back and sealed, then handed back before the next one starts. For a building near Lyness, directions, keys and a contact on the day are worth sorting early. We will confirm the plan with the fixed quote.
- We start with photographs, approximate lengths and any drawings, visiting where needed.
- Joint widths and expected movement are checked against what the sealant can take.
- Every joint is cleared of the failed seal and any grit packed into it.
- Any broken arrises or friable edges are flagged before work goes further.
- The right sealant goes in at the right depth, bonded to the two sides only.
- Areas reopen once cured, and the work carries our 12-month guarantee.
What we need from you
- For older buildings, check the asbestos register before work
- Agree which areas must stay open
- Arrange parking or a loading space
Quotes
The quickest route to a quote is a few photographs and the site postcode. Send them through the quote form, or speak to us on 01277 525 020 or email the details over to discuss it first.
Related advice
Traffic, movement and joints around Lyness
Lyness sits close to the coast, within about 1 mile. Coastal yards and decks give their joints salt and wet weather to deal with, not just wheels, so it pays to keep them sealed. Lyness is on Scotland’s drier eastern side. Cold winters and gritting are hard on any yard or deck joint left open. Autumn is a sensible time to seal them.
Around Lyness, open joints collect water and debris, and the arrises are the next to go.
Lyness is about 13 miles south-west of Kirkwall, in the Orkney Islands. Lyness sits inside our coverage, and jobs here get the same fixed quote and 12-month guarantee as anywhere else. We work across 51 places in the Orkney Islands, large and small.
If you need expansion joint sealing in KW16, the process matches everywhere else we work: send details, get a quote, we seal, guaranteed. You’ll find Lyness on or near the B9048, so getting applicators and materials to site is simple. If your building is just outside Lyness, we cover Longhope (2 miles south), Midland (6 miles north), Hoy (7 miles north-west), Orphir (7 miles north) and Clestrain (7 miles north). Island and remote sites need extra planning, with travel, ferry crossings where needed and weather to allow for, so mention the location when you speak to us on 01277 525 020 or use the quote form.
What’s near Lyness
Other landmarks nearby include Scapa Flow Museum (less than half a mile north-east). The countryside around Lyness includes Binga Fea and Loch of Greenhill.
Your questions answered
Does a coastal location like Lyness affect which sealant is used?
It can. Driven rain and salt are tougher on outside sealant than sheltered inland conditions. That puts more weight on product choice, primers where the manufacturer specifies them, and correct joint sizing.
Is Lyness inside the area you cover, given it’s on an island?
Yes, Lyness is within the area we cover. Our area covers all of Scotland, cities, towns and islands alike. We group island work where we can and plan around the crossings.
Can you handle several sites?
Yes. A group of buildings can go on one quote, and you deal with one contact throughout.
Can you work while the building is occupied?
Yes, as long as we plan it. We agree a sequence with your contact so just one area at a time is disrupted.
Can the sealant be colour-matched?
That depends on the product. Some ranges offer many colours, others very few, so the available colours are confirmed with the quote.
Why do our movement joints keep failing?
Normally the joint is moving more than the sealant can take. We review the joint design as well as the sealant before pricing so the same failure isn’t repeated.
Can you seal joints in cold or wet weather?
Sealing onto a damp surface leads to adhesion failure, so external work waits for suitable conditions. We agree a revised date with you.
How the job changes by surface
Concrete and precast panel joints
Joints between precast panels open and close with temperature and loading. The sealant needs the right movement capability and a controlled depth.
Podium joints
Podium decks are exposed and often trafficked. A sealant suited to both traffic and exposure is used.